What is reinforced concrete?

Reinforced concrete is concrete in which steel reinforcement (rebar) is embedded to carry tensile forces. Concrete is strong in compression but weak in tension; by adding steel, the concrete takes the compression and the steel takes the tension. This combination forms the basis of virtually all modern structures. Application Reinforced concrete is used for foundations, […]

What is a rolled steel beam?

A rolled steel beam is a steel beam or profile that is hot-rolled from a single piece of steel, as opposed to a built-up or welded beam. Common examples are the HEA, HEB and IPE profiles, which serve as the standard profile for spans in buildings. Application A rolled steel beam is used wherever a […]

What is a consequence class?

A consequence class is a classification under the Eurocode that indicates how serious the effects would be if a structure or structural element fails. The class ranges from CC1 (limited consequences) through CC2 (medium consequences) to CC3 (major consequences), and it determines the depth of calculation, checking and supervision required. Application The consequence class is […]

What is a facade garden?

A facade garden is a narrow planting strip against the facade along the pavement, where a few paving stones are replaced with planting. This form of urban greening brings green back into the street, even where there is no front garden. The strip is usually only thirty to fifty centimetres wide, but makes a noticeable […]

What is a gable stone?

A gable stone is a decorative, often carved or painted stone that was built into a facade and identified or adorned the house. In the past, before house numbers existed, such a commemorative stone or house mark showed who lived there or which trade was practised. Especially in historic cities like Amsterdam, many fine gable […]

What is facade renovation?

Facade renovation is the refurbishing and renewing of an existing facade, in which the facade is cleaned, repaired, retro-insulated and finished again. The goal is a facade that looks smart again, lets through less moisture and insulates better. From simple repointing to a complete new facade cladding, the scope varies greatly depending on the situation. […]

What is a facade plinth?

A facade plinth is the lowest zone or base of a facade, often executed in a different, robust material that protects the foot of the wall. Think of natural stone, tiles or a damp-proof course. The plinth catches splashing rainwater, blowing dirt and mechanical damage exactly where the facade suffers most. Application The facade plinth […]

What are facade panels?

Facade panels are sheet-shaped cladding elements that are mounted as large panels onto a support framework on the facade. They are available in materials such as fibre cement, HPL (high pressure laminate), composite, metal and ceramic. Thanks to their size and dry mounting method, they offer a fast and sleek alternative to traditional facade cladding. […]

What is a verge tile?

A verge tile is a special roof tile at the gable side or edge of the roof, which neatly closes the roof surface against the gable end and keeps out wind and rain. The tile has a turned-down edge that laps over the side of the gable or bargeboard. Application Verge tiles are laid along […]

What is a gable finial?

A gable finial is a decorative, vertical ornamental end piece placed at the top of a gable end, often made of timber or metal. It crowns the point where the facade and the ridge of the roof meet, giving the gable an elegant finish. Application The gable finial is best known from traditional and historic […]