What is a biljoen?

A biljoen is a short, heavy timber post used as temporary support during foundation work or formwork construction. These sturdy posts carry loads for a limited period while permanent structural elements are being built, cast or cured. Purpose and placement In Dutch construction practice, the biljoen serves as a vertical prop that transfers the weight […]

What is a splitting hammer?

A splitting hammer is a heavy hammer with a broad, flat striking face on one side and a sharp cutting edge, called a bill, on the other. It is used for rough stone dressing and splitting, making it an essential tool in natural stone masonry and quarrying. Design and function Known in Dutch as a […]

What is chipping?

Chipping is the process of knocking off mortar residue, old plaster layers or protrusions from masonry using a chipping hammer or chisel. It is a fundamental preparation technique in bricklaying and renovation work, ensuring surfaces are clean and level before new finishes or mortar joints are applied. How chipping works Chipping, called “bikken” in Dutch, […]

What is a chipping hammer?

A chipping hammer is a specialized masonry hammer with two sharp, pointed heads, designed to chip off mortar residue, protruding stone pieces or old plaster from masonry. Unlike a standard hammer, both ends of the head are narrow and pointed, giving the user precise control when removing unwanted material from brick or stone surfaces. Design […]

What is snot trimming (bijsnuiten)?

Snot trimming (in Dutch: bijsnuiten) is the process of cutting or scraping away excess mortar (snots) that protrude from the back face of freshly laid brickwork. After bricklaying, mortar often squeezes through and projects from the joints on the inner side of the wall. These projections are removed with a trowel or jointing tool. Why […]

What is supplementary reinforcement?

Supplementary reinforcement is additional steel reinforcement placed at specific locations in a concrete structure to resist local stress concentrations. These are reinforcement bars added alongside the regular main and distribution reinforcement at points where extra tensile forces or cracking risks occur. When is supplementary reinforcement needed? Openings and voids — around holes in slabs or […]

What is a bee hole (bijenbekje)?

A bee hole (in Dutch: bijenbekje, literally “bee’s beak”) is a small, triangular opening in brickwork that occurs where three bricks meet. The name refers to the shape, which resembles a bee’s mouth. Bee holes appear in certain bond patterns, particularly in decorative brickwork. How they occur A bee hole forms when a brick is […]

What is assembly function?

Assembly function is a building use classification for buildings or spaces that are intended for the gathering of people for cultural, religious, sporting, recreational or similar events. In building regulations, assembly use is one of the defined occupancy categories and triggers enhanced requirements for fire safety, structural design and ventilation. Examples Buildings with an assembly […]