What is an inner frame post?
An inner frame post is the inner stile of a window or door frame, the vertical member on the interior side of the wall. It forms part of the frame assembly that holds the window sash or door leaf, and it is positioned on the side of the frame that faces into the building. Role […]
What is an inner fascia board?
An inner fascia board is the fascia board on the inside of a roof gutter, finishing and protecting the roof construction on the interior side. It is the board that sits between the gutter and the building, covering the ends of the rafters or roof beams and providing a clean, weather-resistant finish at the eaves. […]
What is an inner leaf?
An inner leaf is the inner masonry leaf of a cavity wall. Usually the load-bearing part of the wall construction, it is built from calcium silicate bricks, concrete blocks or similar structural materials. The inner leaf carries the weight of floors, roofs and other structural loads, making it one of the most critical elements in […]
What is interior glazing?
Interior glazing is a glazing method where the glass pane is fitted from the inside of the frame, secured with glazing beads or putty. Unlike exterior glazing, where the glass is placed from the outside, interior glazing allows the installer to work from within the building. This technique is commonly used in residential construction and […]
What is binder skin?
Binder skin is the thin layer of hardened cement or lime paste that forms on the surface of freshly poured concrete or mortar. This layer contains little or no coarse aggregate and can result in a weaker, less durable surface if it is not addressed during finishing and curing. How binder skin forms When concrete […]
What is the binder factor?
The binder factor is the ratio between the amount of binder, usually cement, and the total amount of dry components in a concrete mix. It is an important parameter for determining concrete strength, durability and workability, and it plays a central role in mix design. Definition and calculation The binder factor, or “bindmiddelfactor” in Dutch, […]
What is a binder?
A binder is a substance that binds other materials together to form a cohesive whole. In construction, cement, lime and gypsum are the main binders, used in mortar, concrete and plaster to hold aggregates, sand and other components firmly in place once the mixture has hardened. How binders work Binders, referred to as “bindmiddelen” in […]
What is pumice concrete?
Pumice concrete is a lightweight concrete in which pumice stone is used as aggregate instead of gravel. It is lighter than normal concrete and offers good thermal insulating properties, making it a popular choice for non-structural walls, roof screeds and other applications where reduced weight and improved insulation are important. Composition and properties Pumice concrete, […]
What is pumice?
Pumice is a volcanic rock that is very light and porous due to the many air bubbles trapped during a volcanic eruption. In construction, pumice is valued as a lightweight aggregate that improves insulation and reduces the weight of concrete, blocks and other building products. How pumice is formed When gas-rich magma is ejected violently […]
What is BIM?
BIM, or Building Information Modelling, is a digital working method in which all building information is recorded in a 3D model. BIM promotes collaboration between architects, engineers, contractors and other stakeholders, and helps reduce errors, clashes and waste throughout the entire construction process. How BIM works A BIM model is far more than a three-dimensional […]
