What is a snap-off knife?

A snap-off knife (also called a utility knife, Stanley knife or box cutter) is a hand tool with a retractable, segmented blade where snapping off a dull section reveals a fresh, sharp cutting edge. It is one of the most commonly used tools on building sites and in workshops. How does a snap-off knife work? […]

What is fit-out?

Fit-out (also called second fix or finishing works) covers all construction activities carried out after the shell (structural frame) is complete, to make a building ready for occupation. This includes partition walls, plastering, floor finishes, and the installation of plumbing, electrics and heating. Shell versus fit-out The construction process is traditionally divided into two main […]

What is screeding?

Screeding is the process of levelling and finishing a freshly poured concrete surface by drawing a straight edge (screed rail or straight edge) across it. It is one of the first finishing steps after placing concrete, intended to bring the surface flat and to the correct level. How does screeding work? Immediately after pouring and […]

What is setting (cement)?

Setting is the chemical process by which cement begins to harden when it comes into contact with water and develops its final strength. It is the first phase of the curing process of concrete, mortar and screed. How does setting work? When cement is mixed with water, chemical reactions begin (hydration). This process occurs in […]

What is aerogel?

Aerogel is an ultralight, porous material that consists of approximately 95–99% air and is one of the best thermal insulators in existence. In construction, aerogel is used as high-performance insulation where space is limited. How does aerogel work? Aerogel is made by replacing the liquid in a gel with air without collapsing the structure. The […]

What is an aedicula?

An aedicula (plural: aediculae) is an architectural element consisting of two columns or pilasters supporting a pediment (triangular gable), resembling a miniature temple front. It is used as a decorative frame around windows, doors, niches or altars. Origin The aedicula originates from Roman architecture. The word comes from the Latin aedicula, a diminutive of aedes […]

What is AEC bottom ash?

AEC bottom ash (also called incinerator bottom ash or IBA) is the solid residual product that remains after household waste is burned in a waste-to-energy plant. After processing, it is used as a secondary raw material in construction, for example as foundation material or aggregate. How is AEC bottom ash produced? When household waste is […]

What is adsorption?

Adsorption is the process by which molecules (such as water vapour or gases) attach themselves to the surface of a solid material, without being absorbed into the material itself. It differs from absorption, where molecules penetrate into the bulk of the material. How does adsorption work? During adsorption, the surface molecules of a material attract […]

What is adobe?

Adobe is a building material consisting of a mixture of clay, sand, water and organic fibres (usually straw), pressed into moulds and dried in the sun. It is one of the oldest building materials in the world and has been used for thousands of years in dry and temperate climates. How is adobe made? The […]

What is adiabatic cooling?

Adiabatic means that a process takes place without exchanging heat with the surroundings. In construction and building services, the term is mainly used for cooling and ventilation, where adiabatic processes offer an energy-efficient way to cool air. How does adiabatic cooling work? In adiabatic cooling, water is sprayed into an air stream. The water evaporates […]