What is Liquid Roof Coating?

Liquid roof coating is a roofing system applied as a liquid that cures in place to form a continuous, seamless, and fully waterproof membrane over a flat or low-slope roof. How liquid roof coating works The system is applied by brush, roller, or spray directly onto the roof surface. Once applied, the liquid cures through […]

What is Roof Covering?

Roof covering refers to the outermost layer of a roof assembly, serving as the primary barrier against rain, snow, wind, and sunlight to keep the building interior dry and protected. Types of roof covering Roof coverings vary widely depending on the type of roof, the climate, and the architectural style. For pitched roofs, common coverings […]

What is a Roof Balustrade?

A roof balustrade is a protective barrier, either a solid parapet wall or an open railing system, installed along the perimeter of a flat roof or roof terrace to prevent falls and provide safety. Types of roof balustrades Roof balustrades come in several forms. A parapet wall is a solid masonry or rendered wall that […]

What is a Reveal Window?

A reveal window is a window fitted into the side wall, or cheek, of a dormer, extension, or bay window, providing additional daylight and ventilation from a lateral direction. Where reveal windows are used Reveal windows are most commonly found in dormers. A dormer projects from the slope of a roof and has its own […]

What is Reveal Cladding?

Reveal cladding (also known as a dagstuk in Dutch construction) refers to the finishing material applied to the reveal, which is the inner surface of a wall opening where a window or door is installed. Understanding the reveal When a window or door is set into a wall, the thickness of the wall creates a […]

What is Daylight Factor?

The daylight factor (DF) is a percentage that expresses the ratio between the indoor illuminance at a specific point in a room and the simultaneous unobstructed outdoor illuminance under a standardised overcast sky. How the daylight factor is calculated The daylight factor is measured or calculated under a CIE standard overcast sky, which provides a […]

What is Design & Construct (D&C)?

Design & Construct (D&C) is a project delivery method in which a single contractor or consortium is responsible for both the design and the physical construction of a building project. How Design & Construct works In a traditional building process, the client first hires an architect or engineer to create a design, then separately contracts […]

What is Cyclopean Masonry?

Cyclopean masonry is an ancient construction technique in which walls are built from massive, roughly shaped or unworked stone blocks, fitted together without the use of mortar. The name comes from the ancient Greek belief that only the mythical Cyclopes, one-eyed giants, could have moved stones of such enormous size. Applications Cyclopean masonry is most […]

What is a Radiator?

A radiator is a heat-emitting device, typically a metal panel or series of connected sections, through which hot water or steam circulates to transfer heat into a room via radiation and convection. Despite its name, a modern radiator actually delivers most of its heat output through convection rather than radiation. Applications Radiators are the most […]

What is a Central Heating Boiler?

A central heating boiler is a closed vessel or appliance that heats water (or, less commonly, generates steam) for distribution through a network of pipes and emitters to provide space heating and domestic hot water throughout a building. It is the core component of most central heating systems in residential and commercial buildings. Applications Central […]