What is a roof light?

A roof light is any glazed opening installed in a roof surface to allow natural daylight into the space below, and it can take the form of a fixed skylight, an operable roof window, or a domed light unit on a flat roof. Types of roof lights There are several common types, each suited to […]

What is roof length?

Roof length is the horizontal distance measured along the ridge line of a roof from one gable end to the other, and it is a fundamental dimension used in calculating roof area, material quantities, and structural loads. Understanding roof dimensions A roof has several key measurements. The roof length runs parallel to the ridge — […]

What is roof slate?

Roof slate is a fine-grained metamorphic rock that is split along its natural cleavage planes into thin, flat tiles and used as a high-quality roof covering known for its durability, fire resistance, and distinctive appearance. Characteristics of natural slate Slate forms when shale or mudstone is subjected to heat and pressure deep within the earth’s […]

What is a dormer?

A dormer is a structural addition that projects vertically from the slope of a roof, creating additional headroom and floor space in the attic while allowing natural light and ventilation through one or more windows. Types of dormers Dormers come in several forms, each with a distinct roof shape and visual character: Flat-roof dormer — […]

What is a roof house?

A roof house, known in Dutch as a “dakhuis,” is a substantial structure built on top of or within a sloped roof that is significantly larger than a standard dormer and typically provides a full additional room or living area under its own roof. Difference between a roof house and a dormer While a dormer […]

What is roof pitch?

Roof pitch is the steepness or angle of a roof surface, expressed as the incline relative to the horizontal plane, and it directly influences water drainage, material choice, and the usable space beneath the roof. How roof pitch is measured Roof pitch can be expressed in several ways. The most common method is in degrees […]

What is a roof element?

A roof element is a prefabricated building component manufactured off-site and delivered ready to be installed as part of a roof structure, combining insulation, structural support, and often a finished underside in a single unit. How roof elements work Roof elements are produced in a factory under controlled conditions, which ensures consistent quality and precise […]

What is a roof penetration?

A roof penetration is a specially designed building element that allows pipes, cables or ducts to pass through the roof surface while maintaining a watertight seal. It prevents water from entering the building at points where the roof membrane is interrupted. How it works Every roof has points where services need to pass through the […]

What is Roof Construction?

Roof construction, also called roof structure or roof framing, is the load-bearing framework of a roof that transfers the weight of the roof covering, insulation, wind loads, and any snow or maintenance loads down to the walls and foundations of a building. Types of roof construction There are two main categories of roof construction: pitched […]

What is Roof Sheathing?

Roof sheathing (also known as sarking) is the layer of boards or sheet material fixed directly to the rafters or trusses, creating a solid, flat substrate on which the roof covering and underlayment are installed. Materials used for roof sheathing Traditional roof sheathing consists of solid timber boards, typically softwood planks of 18 to 25 […]