How to Build a Bed Frame: DIY for €150-€500 (Step-by-Step Guide 2026)

Facebook
Twitter
LinkedIn
Pinterest

Building your own bed frame costs between €150 and €500 in materials, depending on wood species and size. For comparison: a comparable solid wood bed frame sells for €600 to €1,500 in shops. So you easily save 40 to 60 percent. On top of that, you decide the exact size, wood species and finish yourself. In this article you’ll learn exactly which materials and tools you need, which wood species best fits your budget, and how to build a sturdy bed frame in 10 steps that won’t sag or creak.

What Does It Cost to Build a Bed Frame?

The costs depend on three factors: the bed type, the wood species and whether you buy a slatted base or make one yourself. Below is an overview per bed type.

Material Costs Per Bed Type

Bed type Mattress size Material cost (spruce) Material cost (oak)
Single bed 90 x 200 cm €100 – €180 €250 – €400
Double bed 140 x 200 cm €150 – €250 €350 – €550
Wide double bed 160 x 200 cm €170 – €280 €400 – €600
King size bed 180 x 200 cm €200 – €320 €450 – €700

Prices include timber, screws, wood glue and sandpaper. Excluding slatted base, tools and finishing products.

DIY vs Buying

DIY Ready-made
Cost (double, spruce) €150 – €250 €400 – €800
Cost (double, solid oak) €350 – €550 €900 – €1,500
Time investment 6 – 10 hours 1 – 2 hours (assembly)
Custom sizing possible Yes, fully No, standard sizes
Quality control You decide the timber thickness Manufacturer decides
Lifespan 15 – 30+ years (solid wood) 5 – 15 years (often chipboard)
Difficulty level Medium (basic tools) None

The big difference is quality. Many shop-bought beds are made of chipboard with a veneer layer. A self-built bed of solid wood is sturdier, lasts longer and feels different.

What Type of Bed Will You Build?

Before buying timber, decide which type of bed you want to build. Each type has different dimensions, timber quantities and difficulty levels.

Bed Type Overview

Type Features Difficulty Suitable for
Platform bed Low frame without legs, mattress sits directly on slats Easy Beginners, modern style
Standard bed frame Classic frame on 4 legs, with or without headboard Medium Universal, timeless
Bed frame with storage Frame with drawers or open space underneath Medium-hard Small bedrooms
Loft bed Raised frame with space underneath Hard Children’s rooms, student rooms
Daybed Combination sofa and single bed Medium Guest rooms

For your first project, a platform bed or a simple standard bed frame is most suitable. A platform bed is the simplest: you build a rectangular frame with cross slats on which the mattress rests directly. No legs, no complicated joints.

Standard Mattress Sizes

Always buy your mattress first, or decide on the size beforehand. The inside of your bed frame must match the mattress exactly.

Name Mattress size Frame inside dimension
Single bed 90 x 200 cm 92 x 202 cm
Small double 120 x 200 cm 122 x 202 cm
Standard double 140 x 200 cm 142 x 202 cm
Wide double 160 x 200 cm 162 x 202 cm
King size 180 x 200 cm 182 x 202 cm

The inside dimension of your frame is 2 cm wider and 2 cm longer than the mattress. That gives enough clearance to place the mattress easily, without it sliding around.

The Best Wood Species for a Bed

Not every wood species is suitable. Your bed needs to be sturdy, move minimally (shrink/expand) and smell pleasant. Below are the most commonly used options.

Wood Species Comparison

Wood species Hardness Price per m (beam 70x45mm) Advantages Disadvantages
Spruce (softwood) Soft €2 – €4 Cheap, easy to work with, available everywhere Soft, dents easily, sometimes oozes resin
Pine (softwood) Soft-medium €3 – €5 Beautiful grain, slightly harder than spruce, affordable Can ooze resin, knots sometimes fall out
Beech (hardwood) Hard €6 – €10 Strong, nice colour, wear-resistant More expensive, moves more with moisture
Oak (hardwood) Very hard €8 – €15 Extremely strong, beautiful look, lasts generations Expensive, heavy, harder to work with
Ash (hardwood) Hard €7 – €12 Flexible, strong grain, beautiful pattern Less available, pricey

Recommendation for beginners: choose spruce or pine. It’s cheap, easy to saw and screw, and strong enough for a bed. Want a bed that lasts 30+ years and looks luxurious? Go for oak.

Note with spruce: use at least 45 mm thick beams for the sides and 70×45 mm for the cross beams. Thinner beams will sag under the weight of two people plus a mattress.

Required Materials and Tools

Material List Double Bed (140 x 200 cm)

Timber (spruce):
– 2x beam 70 x 45 mm, length 205 cm (long sides)
– 2x beam 70 x 45 mm, length 140 cm (short sides/ends)
– 3x beam 70 x 45 mm, length 140 cm (cross beams/support beams)
– 1x beam 70 x 45 mm, length 205 cm (centre support beam)
– 4x block 70 x 70 mm, length 30-40 cm (legs, adjust height as desired)
– Slats for slatted base: 14x slat 18 x 70 mm, length 140 cm (or buy a ready-made slatted base)

Fixings:
– Wood screws 5 x 70 mm (approx. 40 pieces)
– Wood screws 4 x 40 mm (approx. 30 pieces, for slats)
– Wood glue (D3 waterproof)
– Corner brackets/furniture brackets (8 pieces, optional but recommended)
– Sandpaper 80, 120 and 180 grit

Finishing:
– Wood oil, stain or varnish (approx. 0.75 litre)
– Felt pads for under the legs

Required Tools

Tool Necessary? Alternative
Cordless drill Yes –
Handheld circular saw or mitre saw Yes Have timber cut to size at the DIY store
Sander Recommended Sanding block (by hand, takes longer)
Combination square Yes –
Tape measure (min. 3 metres) Yes –
Spirit level Yes –
Clamps (min. 2) Recommended Have someone help hold things
Pencil Yes –
Hammer Handy –

Tip: most DIY stores cut timber to size for free or for a small charge. That saves you a circular saw and gives more precise cuts.

Slatted Base: Buy or Make?

This is a common question, and the answer depends on your mattress type.

Comparison

DIY Ready-made
Cost €15 – €30 €40 – €150
Time investment 30 – 60 minutes 5 minutes
Adjustable No Sometimes (pricier models)
Suitable for foam mattress Yes Yes
Suitable for pocket spring mattress Limited Yes (adjustable models)

DIY: screw fixed wooden slats (18 x 70 mm) onto the cross beams with 3 to 5 cm gaps. Simple, cheap and perfectly fine for a foam or latex mattress.

Buy: for a pocket spring mattress a ready-made slatted base with adjustable slats is better. The spring action of the slats works together with the mattress springs. A basic 140 cm wide slatted base costs around €50 at the DIY store or furniture shop.

Rule of thumb: using a foam mattress? Make the slatted base yourself. Using a pocket spring mattress? Buy an adjustable slatted base.

Step-by-Step Guide: Build a Bed Frame in 10 Steps

Step 1: Determine the Design and Dimensions

Measure your bedroom and decide where the bed will go. Allow at least 60 cm of walking space on both sides and at the foot end. Choose your mattress size and calculate the outer dimensions of your frame (mattress size + 2x timber thickness + 2 cm clearance).

Common mistake: forgetting to account for the mattress. Always determine the mattress size first, then the frame.

Step 2: Buy Timber and Cut to Size

Buy your timber at the DIY store or timber merchant. Check each piece for:
– Straightness: lay the beam on the floor and check if it lies flat
– Knots: large, loose knots weaken the wood
– Moisture content: the wood must be room-dry (12-15%). Wet wood shrinks and cracks

Have the timber cut to size if you don’t have a circular saw. Ask for square cuts.

Tip: with professional building plans you save time and materials. At fredsdiyplans.com you’ll find building plans for beds in various sizes, including material lists and step-by-step instructions.

Step 3: Sand All Parts

Sand all pieces of timber before assembly. Start with 80 grit for rough spots, then 120 grit for a smooth base, and finish with 180 grit for a soft finish. Round the edges lightly with sandpaper to avoid splinters.

Pro tip: sanding before assembly is easier than after. You can reach everywhere and work faster.

Step 4: Mount Legs to the Short Sides

Screw the four legs to the inside of the two short side beams (ends). Use wood glue and two screws (5 x 70 mm) per leg. Make sure the top of the leg is flush with the top of the side beam.

Check with a combination square that the leg is perfectly square. A crooked leg only shows when the bed wobbles, and by then it’s hard to correct.

Step 5: Attach the Long Sides

Connect the long side beams to the short sides (where the legs are already attached). Use wood glue, two screws and a furniture bracket on the inside per corner. The furniture brackets provide extra stability and prevent the frame from racking.

Lay the frame upside down on the floor while doing this. That makes it easier to screw and check everything is square.

Common mistake: using only screws, without glue and furniture brackets. After a few months the bed starts creaking. Screws in end grain (the end of a beam) hold poorly. Glue and furniture brackets prevent this.

Step 6: Install the Centre Support Beam

For a double bed a centre support beam is essential. Without it the slatted base slats will sag under the weight.

Attach the centre support beam lengthwise, exactly in the middle of the frame. Screw it to the short sides. Place an extra leg or support block underneath in the middle of the beam.

Note: for a single bed (90 cm wide) a centre support beam isn’t necessary. At 140 cm and wider, always install one.

Slatted base and support: which choice fits your bedFoam mattress→Make the slatted base yourselfPocket spring mattress→Buy an adjustable slatted baseSingle bed (90 cm wide)→Centre support beam not necessaryBed 140 cm and wider→Always install a centre supportbeam
Choices as described in this guide: slatted base by mattress type, centre support beam by bed width.

Step 7: Attach Cross Beams/Support Slats

Screw three cross beams perpendicular to the long sides, distributed along the length. One at 50 cm from the head end, one in the middle, one at 50 cm from the foot end. These beams support the slatted base and prevent sagging.

Make sure the top of the cross beams sits 2 cm lower than the top of the frame. The slatted base slats sit on top and shouldn’t stick out above the frame.

Step 8: Install the Slatted Base

DIY: distribute 14 slats evenly across the frame with 3 to 5 cm gaps. Screw each slat with 2 screws (4 x 40 mm) to the cross beams and the centre support beam. Pre-drilling prevents the wood from splitting.

Ready-made: lay the purchased slatted base in the frame. Check it fits properly and can’t shift.

Step 9: Apply the Finish

Apply a finish to the wood. You have three options:

Finish Effect Maintenance Protection
Wood oil Natural look, wood breathes Annual new coat Good against stains, moderate against scratches
Stain + varnish Colour of choice, glossy or matt Minimal, lasts years Very good, but wood doesn’t breathe
Hard wax oil Combination of oil and wax, satin sheen Every 2-3 years Good, wood partially breathes

Recommendation: hard wax oil is the best all-rounder for a bed. It gives a beautiful, warm look and protects well without completely sealing the wood.

Apply at least two coats with a brush or cloth. Let each coat dry for 12 to 24 hours.

Step 10: Check and Fine-tune

Stand the bed upright and check:
– Is it level? Adjust the legs with felt pads or sand them down
– Does it wobble? Tighten all screws once more
– Does it creak? Apply extra wood glue to creaky spots, or tighten the furniture brackets
– Does the mattress fit? Check it sits properly in the frame

Building a Headboard

A headboard finishes off your bed and protects the wall. You have two options.

Option 1: Wooden Plank Headboard

Screw 5 to 7 planks (120 x 20 mm) vertically or horizontally onto two cross battens. Attach the whole thing to the back of the bed frame or directly to the wall.

  • Material cost: €30 – €60
  • Time investment: 2 – 3 hours
  • Style: rustic, Scandinavian, industrial (depending on finish)

Option 2: Upholstered Headboard

Cover an MDF board (18 mm) with foam rubber (3-5 cm thick) and fabric. Staple the fabric to the back with a staple gun. Mount the board to the wall or the frame.

  • Material cost: €40 – €80
  • Time investment: 2 – 4 hours
  • Style: hotel look, luxury, modern

Tip: an upholstered headboard is more comfortable if you read in bed or watch shows. A wooden headboard requires less maintenance.

Common Mistakes (and How to Avoid Them)

1. Sagging Slatted Base

Cause: no centre support beam on a wide bed, or slats that are too thin.

Solution: always install a centre support beam for beds of 140 cm and wider. Use slats of at least 18 mm thick. Space them maximum 5 cm apart.

2. Creaky Bed

Cause: wood-to-wood joints without glue. Screws in end grain that vibrate loose. Insufficient furniture brackets.

Solution: always use wood glue at joint points, install furniture brackets on all corners, and pre-drill holes to prevent splitting. A drop of candle wax on creaky spots helps as a quick fix.

3. Out-of-square Frame

Cause: not checking for squareness during building.

Solution: measure the diagonals after each step. Two diagonals that are equal length = a square frame. Use a combination square at every corner joint.

4. Wood Splitting When Screwing

Cause: not pre-drilling, screws too thick, or screws too close to the edge.

Solution: always pre-drill with a bit slightly thinner than the screw core. Keep at least 3 cm distance from the edge of the timber. With hardwood species always use a pilot hole.

5. Mattress Doesn’t Fit

Cause: frame inside dimension too tight or too loose.

Solution: allow 1 cm clearance on both sides (total 2 cm wider and longer than the mattress). Measure the mattress yourself, don’t blindly trust the stated size.

6. Bed Too Low or Too High

Cause: legs not matched to mattress thickness.

Solution: the ideal entry height is 50 to 55 cm (top of mattress). Subtract the mattress thickness (often 18-25 cm) and the slatted base thickness (5-8 cm) from 55 cm to determine the correct leg height. With a 20 cm mattress and a 6 cm slatted base, the ideal leg height is about 30 cm.

Getting the bed height right50-55 cmIdeal entry height (top ofmattress)18-25 cmTypical mattress thickness5-8 cmSlatted base thicknessAbout 30 cmLeg height with a 20 cmmattress and 6 cm slattedbase
Leg height follows from the ideal entry height (top of mattress) minus mattress and slatted base thickness. Example values as given in this guide.

Frequently Asked Questions

How much does it cost to build a bed yourself?

Expect €150 to €250 for a double bed frame in spruce, including timber, screws and glue. For an oak bed you’ll pay €350 to €550. A slatted base on top costs €15 to €30 (DIY) or €40 to €150 (bought).

How long does it take to build a bed frame?

A simple platform bed takes 4 to 6 hours. A standard frame with legs and headboard takes 8 to 12 hours, spread over two days (due to drying time of glue and finish).

Can I build a bed with no experience?

Yes. A platform bed or simple frame bed is a good beginner project. You need basic tools (cordless drill, saw, sander) and accuracy is more important than experience. Have the timber cut to size at the DIY store if you don’t have a saw.

What’s the best wood for a bed?

Spruce is best for beginners and budget projects. It’s cheap, easy to work with and strong enough. Oak is the best choice for a bed that needs to last generations, but costs three to four times as much and is harder to work with.

Do I need a building plan?

A detailed building plan isn’t strictly necessary, but a sketch with all dimensions prevents mistakes. Draw the frame from above and from the side, with all measurements. Note the position of the centre support beam and cross beams.

How do I prevent my DIY bed from creaking?

Use wood glue alongside screws at every joint. Install furniture brackets on all corner joints. Pre-drill all screw holes. Check after a few weeks whether screws are still tight and tighten them if needed.

Getting Started

Building your own bed is one of the most rewarding DIY projects. You end up with a piece of furniture you use daily, that fits perfectly in your bedroom, and that you built with your own hands. Start with a simple design in spruce, follow the step-by-step guide, and take your time with the finish. The difference between a good bed and a great bed is in the details: square corners, tight joints and a beautiful finishing coat.

Ready to start building with professional plans? At fredsdiyplans.com you’ll find building plans in various sizes and styles, complete with material lists and step-by-step instructions.

Ready to start building? Check out the complete plans package

With over 10,000 building plans you can start right away. From garden sheds to carports, from workshops to decks.

View the full plans package at fredsdiyplans.com

Related articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Categories

.

Fred’s DIY Plans