In a room with a fuel-burning appliance you fit a carbon monoxide alarm on the ceiling, 1 to 3 metres horizontally away from the appliance and at least 30 centimetres clear of the walls. In rooms without an appliance, a bedroom for example, it goes at breathing height instead: the height at which you sleep or sit. Only buy an alarm with the standard EN 50291-1 on the packaging, and check the sensor’s expiry date. Source: Dutch fire service
Hello fellow DIYer,
Carbon monoxide is the only danger in your house that you cannot pick up with any of your senses. You cannot smell it, you cannot see it, you cannot taste it. And here is the cruel part: the first symptoms feel like flu. Headache, nausea, tiredness. So you go to bed. Exactly the wrong moment.
The figures from the Netherlands show the scale of it. Every year several people there die of carbon monoxide poisoning and hundreds end up in hospital. The Dutch Safety Board estimates that the real number of casualties is three to five times higher, because the poisoning often goes unrecognised. Source: Onderzoeksraad voor Veiligheid
An alarm costs you twenty to sixty euros and ten minutes of work. But it does have to hang in the right spot, because a CO alarm at the wrong height is a false sense of security.
Everything is below: where you stand legally, which alarm to buy, exactly where it goes room by room, how many you need, and what to do when the thing goes off in the middle of the night.
Is a carbon monoxide alarm a legal requirement?
That depends on where you live and whether you own or rent, so check the current rules for your own nation before you rely on anything you read online.
In Scotland, every home needs a CO alarm in any room with a fuel-burning appliance, other than an appliance used only for cooking. In England and Wales, landlords have to fit a CO alarm in any room used as living accommodation that contains a fixed combustion appliance. If you own and live in your own home in England or Wales, there is no general duty on you, only very firm advice. This area has been tightened more than once in recent years, so treat the rules as a floor, not a target.
What is not open to interpretation anywhere in the UK is who may work on gas. Any work on a gas appliance or gas pipework, whether installing, servicing or repairing your boiler, gas water heater, gas fire or gas cooker, has to be done by a Gas Safe registered engineer. Having a go yourself is not an option, and neither is hiring someone who is not on the register. You can check any engineer on the Gas Safe Register.
Alongside that, get your appliances serviced at the interval in the manufacturer’s instructions, which is usually once a year, and have chimneys and flues swept by a qualified sweep.
So: an alarm is not always compulsory, but it is always sensible. And honestly, as a builder I put it like this: it is the cheapest life insurance in your whole house.
Watch out in a flat or a rented home. If you live in a flat with a shared flue or a communal boiler, maintenance of that is a matter for the freeholder, the management company or your landlord. An alarm inside your own home still makes sense, because a leak in a shared flue ends up in your living room.
Where does carbon monoxide come from?
Carbon monoxide (CO) is produced by incomplete combustion. Any appliance that burns something can make it as soon as it is short of oxygen or the flue gases cannot escape properly.
The sources in and around the house, one by one:
- Boiler, especially older types and open-flued appliances without their own air supply
- Gas water heater, the classic culprit in older homes and bathrooms
- Gas fire and gas stove
- Open fire and wood burner, particularly with a blocked or poorly drawing chimney
- Pellet stove
- Gas hob, with poor ventilation or yellow flames instead of blue
- Barbecue or fire pit that is still smouldering and that you bring inside or into the shed “just for a minute”. Lethal, even hours later
- Generator or petrol engine in a garage, shed or crawl space
- Gas patio heater under a closed canopy
- Car left idling in an integral garage
Two things make the risk bigger: too little ventilation, and a flue that does not do its job. That is exactly why CO has become a bigger problem now that we seal our homes tighter and tighter. Insulating is fine, but insulating without sorting out ventilation creates a new problem.
Which carbon monoxide alarm should you buy?
This is where it goes wrong most often. The DIY sheds and the online marketplaces are full of things called “CO alarm” that you do not want in your house.
The hard requirement: EN 50291-1
Only buy a carbon monoxide alarm with the standard EN 50291-1 on the packaging, marked BS EN 50291-1 in the UK, and preferably carrying a Kitemark or another independent approval. The standard says an alarm must not sound below 30 ppm, and must sound from 50 ppm upwards. If the standard is not on the box, put it back. Source: RIVM
Why that lower limit exists: an alarm that screams every time steam comes off the hob is an alarm you take down within a week. And an alarm in a drawer protects nobody.
What else to look for
| Feature | Why it matters |
|---|---|
| EN 50291-1 on the packaging | The only real guarantee of quality |
| Expiry date or sensor life | The sensor wears out and is no longer reliable past its expiry date |
| Sealed lithium battery for the full life | No battery changes, no beeping at three in the morning |
| Digital display with a ppm reading | You see a rising figure before the alarm sounds, and the fire service can use it |
| Peak level memory | Shows whether CO was ever present while you were out |
| Test button | Checks the electronics and the sounder |
| Known brand and a proper manual | Saves hassle with replacement and warranty |
The sensor in a CO alarm typically lasts 5 to 10 years, depending on the model. There is an expiry date on the back. That date is what counts, not the battery. Source: RIVM
What a CO alarm is not
A carbon monoxide alarm is not a smoke alarm, and a smoke alarm is not a carbon monoxide alarm. They measure completely different things and they belong in different places. Smoke rises and gathers at the ceiling, so a smoke alarm always goes on the ceiling. Carbon monoxide mixes evenly with the air instead, and that changes the siting rules entirely.
Combined alarms do exist, but bear in mind that you are hanging a compromise: the ideal spot for a smoke alarm is usually not the ideal spot for a CO alarm. In a living room with a wood burner that can work out fine. In a bedroom it does not.
A CO alarm is also not a gas detector. If you can smell gas, that is natural gas (methane), a different story with a different device.
Where do you fit a carbon monoxide alarm?
This is the heart of it. And the answer differs by type of room, which is exactly what most articles on this subject fail to explain.
Carbon monoxide weighs roughly the same as air and mixes evenly with it. So it does not “sink” to the floor, as people often assume. It does rise along with the warm flue gases coming off an appliance. Hence the difference below.
| Room | Where the alarm goes |
|---|---|
| Room with a fuel-burning appliance (boiler cupboard or plant room, kitchen with a gas water heater, room with a wood burner) | On the ceiling, 1 to 3 metres horizontally from the appliance, at least 30 cm clear of the walls |
| Bedroom | At breathing height: the height you lie at in bed, so roughly pillow height on the wall |
| Living room with no appliance | At breathing height, so seated or standing head height |
| Landing, corridor, hallway | At breathing height, and ideally where you can hear it from the bedrooms |
| Caravan, motorhome, boat | On the ceiling, out of the corners and away from vents |
The fixed rules, whatever the room
- At least 30 centimetres from surrounding walls, corners and the ceiling when you wall-mount it.
- Not behind or underneath anything: no curtains, no cupboard door, no shelf in front of it.
- Not next to an air inlet or extract, so no vents, no cooker hood, no window that is permanently on the latch. The CO gets diluted there and you read too low.
- Not directly above the hob. Cooking fumes and steam wreck the sensor and cause nuisance alarms.
- Not directly above or against the appliance itself. Hence that 1 to 3 metres of distance.
- Not in a space that regularly drops below 0 or climbs above 40 degrees, such as an unheated garage or a loft under a dark roof. Check the manual for the stated operating temperature.
- Not in damp steam, so not straight above the shower.
How many alarms do you need?
The rule of thumb I work to myself:
- One alarm in every room with a fuel-burning appliance. Boiler cupboard, kitchen with a gas water heater, room with a wood burner or gas fire.
- One alarm in or right next to every bedroom that somebody sleeps in. This is the important one, because asleep you notice nothing of the early symptoms.
- One alarm per floor if you have several storeys and the alarms cannot be heard from one to the other.
For an average terraced house with a boiler in the loft and bedrooms on the first floor you are quickly looking at two or three alarms. Budget roughly 50 to 150 euros for the whole house.
Is your boiler tucked into a cupboard or recess smaller than a square metre? Then that is not a space anyone would be found in. Put the alarm in the adjoining room where people actually go, on the ceiling and within that 1 to 3 metres of the cupboard door.
Fitting a carbon monoxide alarm: step by step
This really is ten minutes of work. Here we go:
- Read the manual for your model. Seriously. Manufacturers sometimes give different distances, and theirs take priority.
- Decide on the spot using the table above. Walk round the room and check: no curtain, no vent, no cupboard door that will swing into it later.
- Activate the alarm first and hold it in the intended position for a few minutes before you drill. Some alarms run a start-up cycle.
- Hold the mounting plate against the wall or ceiling and mark the holes in pencil.
- Drill. In plasterboard: 6 mm with a cavity fixing. In masonry or concrete: 6 mm with an ordinary plug. If you are drilling into a ceiling with a vapour barrier behind it, go for the wall at breathing height instead.
- Screw the plate on, click the alarm into place and twist it until it stops moving.
- Press the test button. It has to sound loudly. If it does not, something is wrong.
- Write the sensor replacement date on the side of the alarm in permanent marker. Not on the back, because you never look there.
- Put the same date in your diary or your phone. Otherwise it is still up there in eight years and you think you are protected.
Do not want to drill, in a rented home for instance? Double-sided mounting tape from the DIY shop can work, provided the surface is smooth and dust free and the weight is right. Do check every six months that it is still firmly stuck.
Testing and maintenance: the schedule
| When | What you do |
|---|---|
| Monthly | Press the test button, listen for a loud, clear alarm |
| Every six months | Wipe with a dry cloth or vacuum with the brush head, clear dust from the grilles |
| Annually | Replace the battery on models with loose AAA cells. Not needed with a sealed lithium battery |
| Annually | Have gas appliances serviced by a Gas Safe registered engineer, at the manufacturer’s interval |
| Annually | Have the chimney swept if you burn wood or solid fuel regularly |
| On the expiry date | Replace the whole alarm, even if it still “works” |
That test button checks the electronics and the sounder, not the sensor itself. There is no safe way to test the sensor at home, and there is no need to. The expiry date is what you go by.
An important warning about testing: some people hold a lighter or a blown-out candle up to the alarm to “test” it. Do not do that. You contaminate the sensor and you can damage it.
It goes off. Now what?
An alarm going off in the middle of the night is a fright. Even so, there is only one correct order, and it does not start with looking for the cause.
- Open windows and doors. Straight away, everywhere.
- Get outside. Take everyone with you, pets included. Do not stay indoors to see what it is.
- Turn off fuel-burning appliances if you can do that without hanging around them.
- Call 999. With symptoms, or with an alarm that keeps sounding, that is not an overreaction. 112 works too. If you can smell gas as well, use the National Gas Emergency number 0800 111 999.
- Do not go back inside until the fire service or a registered engineer says it is safe.
- Have the cause traced by a Gas Safe registered engineer before you use the appliance again.
Do you have an alarm with a display and a memory function? Tell the fire service or the engineer what peak reading is stored. That saves them searching.
Spotting the symptoms
The symptoms of CO poisoning look a lot like flu, with one difference you need to remember:
- Headache, nausea, dizziness, tiredness
- Confusion or difficulty thinking clearly
- With heavier exposure: vomiting, loss of consciousness
The giveaway against flu: with CO, everyone in the house perks up at the same time as soon as you go outside, and the symptoms come back as soon as you go back in. If several people or pets are ill at once in the same house, think CO. Mention it to your GP as well, because CO poisoning often goes unrecognised.
The common mistakes
These are the ones I see most. Have a look at what you recognise:
- The alarm fitted directly above the boiler. Too close, gives nuisance alarms and often sits in a warm air stream.
- The alarm on the bedroom ceiling. Sounds logical, but in a room without an appliance it belongs at breathing height.
- The alarm behind the curtain or in a cupboard. Measures nothing useful.
- Fitted right next to the vent. The air there is always the cleanest, so you read structurally too low.
- Only one alarm, in the boiler cupboard. While the bedroom is where you are most vulnerable.
- Ignoring the expiry date. A twelve-year-old alarm with a working test button is still a dead device.
- Buying a cheap alarm without EN 50291-1 from a marketplace or an unknown web shop.
- Taking the alarm down because it “keeps going off”. If an alarm to the standard sounds repeatedly, something is going on. Call a registered engineer.
- Fitting an alarm and doing nothing else. An alarm is your last safety net, not a substitute for servicing and ventilation.
Prevention is better: the three steps
The fire service sums it up as ventilate, check, alarm. In that order, because the alarm is the last step, not the first.
Ventilate. Keep vents and airbricks open, in winter too. Do not run the cooker hood flat out while an open-flued appliance is burning in the same room, because that pulls the flue gases back into your house. That effect is badly underestimated in well insulated homes.
Check. Have gas appliances serviced by a Gas Safe registered engineer at the interval in the manual, usually once a year. Reckon on roughly 100 to 200 euros for a boiler service. Have the chimney swept annually if you use a wood burner or open fire regularly.
Alarm. Fit the alarms as described above.
There are two more things you can keep an eye on yourself. A gas flame should burn a clear blue. If it turns yellow or orange and soot marks appear around the appliance, something is wrong with the combustion or the air supply. Call a registered engineer then, even without an alarm.
And check that your engineer really is registered. You can look them up on the Gas Safe Register, and every engineer carries an ID card with the work they are qualified for on the back.
What does it cost?
| Item | Realistic range |
|---|---|
| CO alarm to EN 50291-1, basic model | 20 to 35 euros |
| CO alarm with display and sealed 10-year battery | 35 to 60 euros |
| Combined smoke and CO alarm | 40 to 80 euros |
| Covering a whole house (2 to 3 alarms) | 50 to 150 euros |
| Boiler service by a registered engineer | roughly 100 to 200 euros |
| Chimney sweep | roughly 60 to 120 euros |
The figures are ballpark prices to work with. Always get a quote for your own situation.
Frequently asked questions
Is a carbon monoxide alarm a legal requirement?
It depends where you are. In Scotland every home needs one where there is a fuel-burning appliance other than a cooker. In England and Wales it is the landlord who must fit one in any room used as living accommodation with a fixed combustion appliance, while owner-occupiers are strongly advised rather than obliged. What is compulsory everywhere is that work on gas appliances and pipework is only done by a Gas Safe registered engineer.
How high should a carbon monoxide alarm be fitted?
That depends on the room. In a room with a fuel-burning appliance it goes on the ceiling, 1 to 3 metres horizontally from the appliance and at least 30 centimetres clear of the walls. In rooms without an appliance it goes at breathing height: in a bedroom roughly at the height you sleep at, in a living room at seated or standing head height.
How often do you have to replace a carbon monoxide alarm?
There is an expiry date on the back of the alarm. The CO sensor typically lasts 5 to 10 years and is not reliable after that, even if the test button still responds. Replace the whole alarm on that date, not just the battery.
Can I use a smoke alarm as a CO alarm?
No. A smoke alarm detects smoke particles, a CO alarm measures a gas you cannot see. They also belong in different places. Combined alarms exist, but siting one is always a compromise. In a bedroom, a separate CO alarm at breathing height works better.
Why is my carbon monoxide alarm going off when I cannot smell anything?
That is precisely the point: carbon monoxide is odourless, colourless and tasteless. You can never smell it. If the alarm sounds, treat it as a real alarm: windows open, get out, call 999. An alarm that meets EN 50291-1 is not allowed to sound at all below 30 ppm, so a false alarm from a proper alarm is unlikely.
Where should you definitely not fit a CO alarm?
Not directly above the hob, not next to vents or extract openings, not behind curtains or in cupboards, not in corners, not within 30 centimetres of walls and ceiling when wall-mounted, and not in spaces that regularly drop below 0 or climb above 40 degrees. Always check the manual for the stated operating temperature.
Can I service my own boiler or gas water heater?
No. Work on gas appliances and gas pipework may only be carried out by a Gas Safe registered engineer. Having a go yourself, or hiring someone who is not on the register, is not allowed. Fitting an alarm and checking the flame colour is of course something you can happily do yourself.
Are you busy insulating, draught-proofing or making your home more efficient? Then keep an eye on the ventilation, because it is precisely in a well sealed house that carbon monoxide becomes a bigger risk. In the Energie-Verpulveraar I explain step by step how to make your home energy efficient without ending up with damp, mould or combustion problems. Insulate and still live healthily, in the right order.
Do yourself a favour. Fit that alarm this weekend.
Best regards from Fred Schouten, builder and DIYer through and through
PS: go and check the expiry date on the alarm you already have up. In nine out of ten houses I visit, it has passed.


