What is the U-value?

The U-value is the thermal transmittance in W/(m²·K): how much heat escapes through a building element. How to calculate it, glazing values and tips.

What is a U-block?

A U-block is a U-shaped masonry unit used as permanent formwork for a lintel or ring beam. How it works, where it is used and ...

What is a U-channel?

A U-channel is a steel beam with a U-shaped cross-section. The difference between UPN and UPE, typical uses and practical tips for choosing and fixing ...

What is a type approval?

A type approval shows that a building type meets the technical building rules, so not every project has to be checked again. How it works ...

What is an alternative load path?

An alternative load path stops a building from collapsing when one member fails. An explanation of robustness, progressive collapse, examples and design principles.

What is a tie-beam bent?

A tie-beam bent (Dutch: tussenbalkgebint) is a timber frame of two posts with a cross beam that ends inside the posts. Layout, recognition and how ...

What is a tunnel segment?

A tunnel segment is a precast concrete unit that forms a ring with other segments in a bored tunnel. Ring layout, key segment, gaskets and ...

What is tunnel formwork?

Tunnel formwork is a steel system formwork for casting walls and slab in one pour. How it works, the daily cycle, typical projects and practical ...

What is a tuned mass damper?

A tuned mass damper is a tuned mass with springs and dampers that reduces sway and vibration in tall buildings and bridges. How it works, ...

What is a tumulus?

A tumulus is an artificial burial mound of earth or stones raised over one or more graves. Origins, construction, examples and what it means for ...

Categories

.

Fred’s DIY Plans