What is a subsidence crack?

A subsidence crack forms when part of a building sinks unevenly. Why such cracks are almost always serious, how to monitor them and what to ...

What are bagged materials?

Bagged materials are building materials supplied or removed in bags or bulk bags, such as sand, gravel and cement. Explanation, bulk bags and practical site ...

What is a settlement plate?

A settlement plate measures how much the subsoil sinks beneath an embankment or fill. Construction, how it works and tips for monitoring settlement.

What is a saddle ridge?

A saddle ridge is a ridge tile that closes off the roof ridge and engages on both sides with the head interlocks of the top ...

What is the soft shell of a timber pile?

The soft shell is the decayed outer layer of a timber foundation pile that no longer contributes to its load-bearing capacity. Causes, measurement with an ...

What is softboard?

Softboard is a soft, lightweight wood fibreboard made without added glue. Properties, use as a flooring underlay, and what to watch for regarding fire safety ...

What is a single-nave church?

A single-nave church is a church with a rectangular plan and one nave without aisles. Features, the difference from a hall church and basilica, and ...

What is a zaadvenster?

A zaadvenster is an opening window in the seed loft of a Dutch farmhouse, used to keep stored grain dry and ventilated. Origins, features and ...

What is a Z-section?

A Z-section is a (usually steel) profile with a Z-shaped cross-section, widely used as a purlin or side rail in industrial buildings. Uses, advantages and ...

What is XPS (extruded polystyrene)?

XPS is extruded polystyrene: a closed-cell, high-compressive-strength insulation board with low water absorption. Properties, uses, how it differs from EPS, and handling tips.

Categories

.

Fred’s DIY Plans