What is hot-rolled steel?

Hot-rolled steel is rolled at high temperature into sections, plates and flats such as universal beams, columns and channels. Properties, difference from cold-formed steel and ...

What is a warm roof?

A warm roof is a roof in which the insulation sits above the structural deck, with a vapour control layer on the warm side. Build-up, ...

What is reinforcing tape (joint tape)?

Reinforcing tape is a narrow strip of paper, glass fleece or mesh that reinforces joints and corners between boards so the jointing compound does not ...

What is wane in timber?

Wane is the rounded original surface of the log (sometimes with bark) left on the edge of sawn timber. What it means for strength, grading ...

What is wall heating?

Wall heating is a heating system in which the wall itself gives off heat, via hot-water pipes or electric mats behind the plaster. How it ...

What is top-down construction (walls-and-roof method)?

Top-down construction is a method for tunnels and deep underground structures: diaphragm walls first, then a concrete roof slab, then excavation beneath the roof. The ...

What is a wall socket (socket outlet)?

A wall socket, or socket outlet, is a fixed outlet in or on the wall for plugging in appliances. Explanation of earthing, flush and surface ...

What is a stretched fabric wall covering?

A stretched fabric wall covering (Dutch: wandbespanning) is a wall finish of cloth, paper and wallpaper, textile or leather stretched over battens a few centimetres ...

What is a wadi (infiltration swale)?

A wadi (Dutch term for an infiltration swale) is a lowered, planted strip or hollow where rainwater is stored temporarily and slowly soaks into the ...

What is a wachtgevel?

A wachtgevel (Dutch/Flemish, "waiting wall") is a usually windowless side wall built in anticipation of a future building on the neighbouring plot, or left exposed ...

Categories

.

Fred’s DIY Plans