What is stone dressing?

What is stone dressing? Stone dressing is a masonry technique in which pieces of natural stone are chipped away with a hammer and chisel to achieve the desired shape. It is one of the oldest and most fundamental techniques in stonemasonry. How does stone dressing work? During stone dressing, a rough stone is shaped step […]

What is shear failure?

What is shear failure? Shear failure is the sliding or collapse of a material, soil layer or structural element caused by shear forces. In shear failure, two parts of the material slide past each other — similar to pushing a deck of cards sideways. How does shear failure work? Shear forces act parallel to the […]

What is a chamfer?

What is a chamfer? A chamfer (also called a bevel, cant or arris) is an angled cut on the edge of a building element. Instead of a sharp 90° corner, the edge is cut at an angle — typically 45° — to create a flat, sloping surface. Why use a chamfer? Chamfers are applied for […]

What is spalling?

What is spalling? Spalling is the chipping, flaking or breaking away of small pieces of material from the surface of concrete, brick or masonry. It appears as small craters, pits or flakes on the surface and can indicate quality problems or damage to the structure. What causes spalling? Spalling can have several causes: Frost damage […]

What is striking formwork?

What is striking formwork? Striking (also called stripping or striking formwork) is the removal of formwork (shuttering) after the poured concrete has developed sufficient strength to support itself. The formwork — the temporary mould into which concrete is cast — is only removed once the concrete is self-supporting. How does striking work? Formwork gives liquid […]

What is screeding?

What is screeding? Screeding is the process of levelling a freshly poured concrete floor or screed by drawing a straight edge (screed rail or levelling board) across the surface. The straight edge removes excess material and produces a flat surface at the correct height. How does screeding work? After pouring concrete or laying a floor […]

What is a roof outlet?

What is a roof outlet? A roof outlet (also called a rainwater outlet or drain fitting) is an opening or device in a building structure through which rainwater is drained in a controlled manner. The term is used in construction for various water-drainage fittings on roofs, gutters and walls. How does a roof outlet work? […]

What are construction abbreviations?

What are construction abbreviations? The construction industry uses hundreds of abbreviations to communicate quickly and clearly on drawings, specifications and on site. Knowing these abbreviations is essential for anyone who works with building plans or construction documents. Common abbreviations Dimensions and levels c/c — centre to centre (spacing between axes) FFL — finished floor level […]

What is render texturing?

What is render texturing? Render texturing (also called float finishing or scraping) is a plastering technique in which a freshly applied render or plaster coat is worked with a float to create a uniform, granular surface texture. The coarse aggregate particles in the mix are dragged across the surface, producing the characteristic grain pattern. How […]

How to Replace a Window Frame: Costs, Materials and Step-by-Step Guide (2026)

Having a window frame replaced by a tradesperson costs on average €400 to €1,200 per window, including materials and installation. Doing it yourself saves €200 to €600 in labour per window – but you need to know what you’re doing. What Does It Cost to Replace a Window? DIY vs. Tradesperson Cost Comparison per Window […]