What is a hip (roof)?

What is a hip (roof)? A hip is a sloping triangular roof surface formed by cutting back the gable end of a pitched roof at an angle instead of carrying the roof slopes up to a vertical gable wall. The resulting roof shape, where one or both ends slope inwards, is known as a hipped […]

What is a floor finish?

What is a floor finish? A floor finish is the top layer of a floor build-up that forms the final walking and use surface. The floor finish sits on the structural floor (the load-bearing concrete slab) and can consist of various materials depending on the function and desired appearance. Floor build-up A complete floor build-up […]

What is carbon capture and storage?

What is carbon capture and storage? Carbon capture and storage (CCS) is a technology that captures carbon dioxide (CO2) from industrial processes and stores it deep underground so that it does not enter the atmosphere. The construction sector is closely linked to CCS because the production of cement and steel generates large quantities of CO2. […]

What is waste water?

What is waste water? Waste water is water that has been contaminated after use and is discharged via the drainage system to a sewage treatment works. In building services, several types of waste water are distinguished, each with its own drainage arrangement. Types of waste water Foul water (black water) — waste water from the […]

What is an energy-from-waste plant?

What is an energy-from-waste plant? An energy-from-waste (EfW) plant (formerly called an incinerator or waste-to-energy facility) is an industrial installation that burns non-recyclable residual waste and converts the released heat into electricity and/or district heating. The UK has around 50 operational EfW plants. How does an EfW plant work? The process follows these steps: Delivery […]

What is a drain cock?

What is a drain cock? A drain cock (also called a drain valve or drain-off valve) is a valve that allows water or another fluid to be drained from a pipe, radiator or heating system. The valve is fitted at the lowest point of the system so that the liquid can flow out by gravity. […]

What is the clearance factor?

What is the clearance factor? The clearance factor is a coefficient that indicates how many times the height (or width) of a heat source must be maintained as a minimum distance to combustible materials. It is used when safely positioning stoves, fireplaces, chimneys and other heat sources. How does the clearance factor work? Every heat […]

What is a laser distance meter?

What is a laser distance meter? A laser distance meter (also called a laser measure or laser rangefinder) is an electronic measuring instrument that uses a laser beam to measure the distance to a surface. The device calculates the distance based on the time it takes for the laser light to be reflected back. How […]

What is a spacer?

What is a spacer? A spacer (also called a cover block or chair) is a small device that holds reinforcement at the correct distance from the formwork, ensuring the required concrete cover is achieved. Without spacers, the reinforcement would rest against the formwork and be insufficiently protected. Why are spacers important? The concrete cover — […]

What is snagging a beam end?

What is snagging a beam end? Snagging (or snaping) a beam end is the practice of cutting the tip of a timber beam, rafter or purlin at an angle, creating a chamfered (snagged) end. The point of the timber is removed on a slope rather than left square. Why snag a beam end? Snagging beam […]