What is a Concrete Paver?
A concrete paver is a precast block made from a mixture of cement, sand, aggregate, and pigments, used as a surface material for driveways, patios, pathways, and other paved areas. Concrete pavers are a popular and cost-effective alternative to traditional clay brick pavers (clinkers), offering a vast range of shapes, sizes, colours, and surface textures. […]
What is a Thermally Activated Building System?
A Thermally Activated Building System (TABS) is a climate control method in which water-carrying pipes are embedded directly within the concrete mass of floors or ceilings to provide both heating and cooling to a building. By using the large thermal mass of the concrete as a heat store, TABS delivers a stable indoor climate with […]
What is Concrete Injection?
Concrete injection is a specialized repair technique in which cracks, voids, or honeycombing in concrete are filled by injecting a liquid material — typically epoxy resin, polyurethane resin, or cement grout — under controlled pressure. The injected material fills the crack from the inside, bonds the concrete surfaces back together, and restores structural integrity or […]
What is Welded Wire Mesh?
Welded wire mesh (also called welded fabric or mesh reinforcement) is a grid of steel wires arranged at right angles and electrically welded at every intersection point. It is one of the most common and practical forms of reinforcement for concrete slabs, floors, and other flat or lightly loaded structural elements. Sizes and Specifications Welded […]
What is Concrete Enamel?
Concrete enamel is a durable protective coating or paint specifically formulated for application on concrete surfaces. It forms a hard, often glossy or semi-glossy film that shields the concrete from water penetration, chemical exposure, abrasion, and UV degradation, while also giving the surface a clean, finished appearance. How It Works Unlike standard wall paint, concrete […]
What is a Concrete Press Pile?
A concrete press pile is a precast concrete foundation element that is pushed into the ground using hydraulic pressure rather than being hammered in with a pile driver. Because the pile is pressed rather than driven, the installation is virtually vibration-free and produces very little noise, making it ideal for use in built-up areas and […]
What is a Rebar Spacer?
A rebar spacer is a small support device — made of plastic, concrete, or sometimes steel — that holds reinforcement bars at the correct position inside formwork before and during a concrete pour. Spacers ensure that the finished concrete element has the right amount of concrete cover over the reinforcement, which is essential for durability […]
What is Concrete Cover?
Concrete cover is the minimum distance between the outer surface of a concrete element and the nearest surface of the embedded reinforcement steel. It serves as the primary protective barrier for the steel bars inside concrete, shielding them from moisture, chemicals, and fire exposure. Without adequate concrete cover, reinforcement steel is vulnerable to corrosion. When […]
Epoxy River Table: How to Make One Yourself (2026)

Making an epoxy river table yourself costs €200 to €600 in materials. Ready-made river tables cost €800 to €3,000 or more — so making your own saves considerably, and you create a unique piece that fits your home perfectly. Casting an epoxy table is not difficult, but it does require patience and the right products. […]
Hang an Interior Door: Step-by-Step Guide (2026)

Hanging a door yourself costs €50 to €300 in materials, depending on the door itself and whether a new frame is needed. A door only (without frame) costs €30–€150. A complete set including frame and door costs €100–€400. Having it done by a carpenter will cost €100–€300 in labour. Hanging an interior door is a […]
