What is a concrete frame?
A concrete frame is a load-bearing structural skeleton made up of reinforced concrete columns and beams, connected at rigid joints to transfer all vertical and horizontal loads down to the foundations. Because the frame itself carries the weight of the floors and roof, the walls between the columns are non-structural and can be built from […]
What is a segmental concrete pile?
A segmental concrete pile is a type of deep foundation element composed of short, precast concrete segments that are stacked on top of each other and pressed or driven into the ground until they reach a load-bearing soil layer. Each segment is typically 1 to 2 metres long and is connected to the next by […]
What is concrete spalling?
Concrete spalling is a form of concrete degradation where chunks or flakes of concrete break away from the surface, typically caused by corrosion of the steel reinforcement embedded within it. When the steel bars rust, they expand to several times their original volume, generating internal pressure that cracks and eventually pushes off the surrounding concrete. […]
What is a concrete pump?
A concrete pump is a machine that pushes fresh, ready-mix concrete through a pipeline or flexible hose to deliver it precisely where it is needed on site. It eliminates the need to transport concrete manually with wheelbarrows or crane skips, saving time and labour, especially on larger pours or when access is difficult. There are […]
What is film-faced plywood?
Film-faced plywood is a type of plywood sheet that has been coated on both faces with a thin layer of phenolic resin film, creating a smooth, water-resistant surface ideal for use as concrete formwork. The film prevents the concrete from bonding to the board, makes stripping easier, and allows the panels to be reused multiple […]
What is a precast concrete panel?
A precast concrete panel is a concrete wall element that is manufactured in a controlled factory environment, cured, and then transported to the construction site where it is lifted into position by crane. This method of building allows for fast assembly, consistent quality, and reduced on-site labour compared to traditional in-situ concrete or masonry walls. […]
What is a concrete upstand?
A concrete upstand is a concrete element that sits on top of the foundation and forms the transition between the foundation and the first course of masonry. It raises the wall start above ground level, protecting the brickwork or blockwork from moisture and providing a level base to build from. Upstands are typically between 300 […]
What is ready-mix concrete?
Ready-mix concrete is concrete that is batched and mixed at a central plant, then delivered to the construction site in a rotating drum truck. Unlike site-mixed concrete, the proportions of cement, aggregates, water, and additives are precisely controlled in a factory environment, ensuring consistent quality and strength. When the truck arrives on site, the concrete […]
What is Concrete Strength Class?
A concrete strength class is a standardized designation that classifies concrete based on its characteristic compressive strength, measured after 28 days of curing. The classification follows the format C20/25, C30/37, and so on, where the first number refers to the strength measured on a cylinder test specimen (in N/mm2) and the second number refers to […]
What is Concrete Shrinkage?
Concrete shrinkage is the gradual reduction in volume that occurs as concrete cures and excess water evaporates from the mix. This is a natural and unavoidable process, but if it is not properly accounted for during design and construction, it can lead to unsightly and sometimes structural cracks. Types of Shrinkage Concrete experiences several forms […]
