What is a concrete floor?
A concrete floor is a floor structure made from cast-in-situ or precast concrete, with or without reinforcement. Concrete floors serve as ground-floor slabs, upper-storey floor slabs and screeds. They are strong, durable and form the base for virtually any floor finish. Types of concrete floors Ground-bearing slab — a concrete slab cast directly onto compacted […]
What is concrete stucco?
Concrete stucco is a cement-based finish coat applied to walls or ceilings to create a smooth, hard-wearing surface. Unlike traditional gypsum plaster, concrete stucco uses cement as its binder, making it harder, more water-resistant and more durable. Properties Water-resistant — suitable for wet rooms such as bathrooms, basements and utility rooms High strength — harder […]
What is a concrete stamp?
A concrete stamp is a mould or mat that is pressed into freshly poured concrete to create a decorative surface that imitates natural stone, brick, wood or other materials. This technique is known as stamped concrete or imprinted concrete and is a popular way to give concrete surfaces an attractive appearance. Process Pouring — the […]
What are concrete blocks (general overview)?
Concrete blocks is a collective term for all stone-like building products that are manufactured from cement and aggregates. The family includes solid blocks, hollow blocks, decorative blocks and lightweight aerated concrete blocks, each with their own applications and properties. Types of concrete blocks Solid block — a dense block with high compressive strength, suitable for […]
What is a concrete block?
A concrete block is an artificial building unit made from cement, sand, aggregate and water. Unlike fired clay bricks, concrete blocks are not kiln-heated but harden through the hydration process of cement. They are widely used in construction because of their low cost, uniform dimensions and good compressive strength. Properties Compressive strength — available in […]
What is reinforcing steel?
Reinforcing steel (commonly called rebar) is steel that is specifically manufactured to be embedded in concrete, enabling the combined material to resist both compressive and tensile forces. Concrete is strong in compression but weak in tension. By adding reinforcing steel, the result is reinforced concrete — a construction material that can handle both types of […]
How to Lay a Foundation for a Garden Room, Shed or Garden Wall (2026)

Laying a foundation costs €5 to €20 per square metre (materials), depending on the type. For a garden room measuring 3×5 metres (15 m²), a simple pad foundation can be done for €100 to €200. A full concrete slab for the same garden room costs €400 to €800. Hiring someone to do it? Expect to […]
How to Build a Bike Shed: Complete Guide with Costs, Materials and Step-by-Step Instructions (2026)

Having a bike shed built costs an average of €600–1,500 for a wooden shed for 3–4 bicycles. Build it yourself and you only pay for materials: €200–600 depending on the type and size. A bike shed is one of the most practical garden building projects: it protects your bikes from rain and theft, and keeps […]
What is fresh concrete?
Fresh concrete is concrete in its unset, plastic state — the workable mixture of cement, sand (fine aggregate), gravel (coarse aggregate), and water that has been mixed but has not yet begun to harden. During this phase, the concrete can be transported, poured into formwork, spread, compacted, and finished. Once the cement reacts with the […]
What is a concrete type?
A concrete type is a way of classifying concrete according to its composition, the presence or absence of reinforcement, and its intended use. Different construction situations demand different properties from the concrete, and choosing the correct type ensures that the finished structure performs safely and durably. The most fundamental distinction is between unreinforced (plain) concrete […]
