What is Conduction?
Conduction (thermal conduction) is the transfer of heat through a material, from warm to cold, without the material itself moving. It is one of the three forms of heat transfer, alongside convection (flow) and radiation. Features How well a material conducts heat is expressed by the thermal conductivity: The coefficient lambda (λ) is given in […]
What is Glued Laminated Timber?
Glued laminated timber (glulam; German: Brettschichtholz or BSH) is a structural element made of several bonded layers (laminations) of dried timber boards, with the grain running in the same direction. This produces a strong, homogeneous and dimensionally stable product. Features Thanks to its build-up of thin, quality-controlled laminations, glulam outperforms solid timber: High strength-to-weight ratio […]
What are Coupled Columns?
Coupled columns are two (sometimes more) columns placed close together, as a pair, that together form a single support or rhythmic accent. They stand on a common pedestal or jointly carry part of the entablature. Features Coupled columns are recognisable by their paired arrangement: Two or more columns stand close together as one unit. They […]
What is a Struck Joint?
A struck joint is a mortar joint finish in masonry where the excess mortar is cut off at an angle with the trowel, creating a sloping joint face. The sloping face helps rainwater run off the wall properly. Features The struck joint is recognisable by its angled profile: Sloping joint face, formed by cutting the […]
What is Squared Timber?
Squared timber is wood that has been worked (sawn or hewn) to a rectangular cross-section with straight, square edges, without wane. Squaring means making the sides straight and at right angles, removing the bark and rounding of the trunk. Features Squared timber stands out for its clean, regular shape: Rectangular cross-section with flat, square faces. […]
What is a Chimney Cowl?
A chimney cowl is a rotating cap on a chimney or ventilation pipe that turns with the wind, so the opening always faces away from the wind. This prevents downdraught (blowing smoke back down) and improves the draught and extraction. Features The cowl stands out for its rotating, self-aligning construction: Turns freely with the wind […]
What is a Geison?
The geison is, in classical (Greek) architecture, the projecting cornice of the entablature, located above the frieze and below the sima or pediment. It forms the uppermost horizontal termination of the entablature. Features The geison projects strongly beyond the parts of the facade below it. Sits above the frieze and below the sima (the gutter […]
What is a Depressed Arch?
A depressed arch is an arch whose rise (height) is small relative to its span, making it much flatter than a semicircular arch. The ratio between height and width determines how “depressed” the arch appears. Features A depressed arch comes in several forms, depending on the curvature used. Segmental arch: a portion of a circle […]
What are Defects in Houses?
Defects in houses are shortcomings that affect the quality, safety or value of a home. They can be visible or hidden and range from minor maintenance issues to serious structural problems. Features Common defects in houses include: Damp problems: rising damp, penetrating damp and condensation Cracking in walls and facades Wood rot and woodworm in […]
What is Stained Glass Painting?
Stained glass painting is glass that is painted with special glass paint and then fired in a kiln, causing the paint to fuse permanently with the glass surface. The technique of painting and firing the glass is called stained glass painting. Features Stained glass painting uses paints based on metal oxides as well as grisaille […]
