What is a basket arch?
A basket arch is an arch built up from several circular segments of differing radii, giving it the outline of an upturned basket. It is also known as a basket-handle arch or a three-centred arch, and in Dutch as a paanderboog, from paander, an old word for a basket. How it is built up Where […]
What is end grain?
End grain is the face of a tree, beam or board that is cut across the fibre direction. You are effectively looking down onto a tree trunk, with the growth rings visible. The opposite face — the long face of the board — is called long grain or side grain. What makes end grain different […]
What is pile head cropping?
Pile head cropping is cutting the concrete heads of driven piles down to the correct level in order to expose the reinforcement. The exposed bars then project into the ground beam or pile cap that is cast afterwards, forming the structural connection between pile and foundation. Why it is necessary A precast concrete pile can […]
What is perpend gauge?
The perpend gauge is the width of one brick (the header) plus the width of one cross joint. It is the base dimension a bricklayer uses to set out a wall along its length, so that the perpends line up course after course. The rule behind good brickwork For a bond to work out visually, […]
What is a perpend gauge rod?
A perpend gauge rod is a lath marked out with the perpend gauge, which a bricklayer uses as a measuring stick while laying bricks. Where the storey rod sets the height of the courses, the perpend gauge rod sets the spacing along the length of the wall. Why bricklayers use one For neat brickwork, the […]
What is a tie bar?
A tie bar is a steel bar, usually deformed reinforcement, that prevents unwanted movement between parts of the same structure. It is cast across a joint and holds the two adjoining elements together. Tie bar versus dowel This is the distinction that goes wrong most often on site: Tie bar Dowel Surface Deformed (ribbed) reinforcement […]
What is a coupling anchor?
A coupling anchor is a metal anchor that ties together two beams lying in line with each other. The beams meet at a bearing — usually over a wall or a bressummer — and the coupling anchor turns those two loose ends into one continuous member. What it does In a floor spanning several bays, […]
What is door and window trim?
Door and window trim is a narrow moulding that covers the joint between a frame and the adjoining wall or plaster. In British practice it is usually called an architrave; in North America it is known as casing. It is set against the reveal of the frame and laps over the wall finish, so that […]
Building a Run-In Shed: A Simple Shelter for Animals in the Pasture

Building a run-in shed? Learn how to tackle it smart, what materials you need, which mistakes to avoid and what to check beforehand.
Building a horse stable: what to watch for on space, ventilation and safety

Building a horse stable? Learn how to approach it smartly, what materials you need, which mistakes to avoid and what to check beforehand.
