What is a thermal bridge?
A thermal bridge — often called a cold bridge — is a place in the building envelope where heat escapes considerably faster than through the surrounding area. The insulation is interrupted, thinner, or the geometry works against you. The result is a cold spot on the internal surface. Two kinds Material thermal bridge — a […]
What is a cold joint?
The term cold joint is used on site for two different things. Both come down to two parts sitting against each other without being genuinely connected. 1. The dry joint in masonry, tiling and boarding Here a cold joint is a cross joint in which bricks, blocks, boards or panels are set dry against one […]
What is a cold chisel?
A cold chisel is a heavy, usually elongated steel chisel used for cutting into stone, concrete and metal. The name comes from working metal cold: unlike forging, the material is not heated first. Characteristics Length — typically 20 to 40 cm. Longer gives more reach and keeps your hand further from the hammer; shorter gives […]
What is a cold roof?
A cold roof is a roof construction in which the insulation sits below the structural deck or between the rafters, leaving the structure and the sarking on the cold side of the insulation. In a warm roof the insulation sits above the structure, so the whole structural element stays warm and dry. The build-up from […]
What are buyer’s costs (kosten koper)?
Kosten koper — abbreviated k.k. — is the Dutch term meaning that the costs of legally transferring ownership of a property are for the buyer’s account, on top of the purchase price. You will see the abbreviation on virtually every existing home for sale in the Netherlands. What it covers Three items fall under kosten […]
What is a putlog hole?
A putlog hole is an opening in masonry through which a putlog passed. A putlog is the short transverse member of a scaffold that carries the working platform. In historic building practice — and with a putlog scaffold to this day — one end of that member bore directly on the wall itself. The hole […]
What is particle size distribution?
Particle size distribution states in what proportions the different particle sizes occur in a mixture. It is also called grading or gradation. It is determined by sieve analysis: the material passes through a series of sieves with progressively finer mesh, and the amount retained on each sieve is weighed. The result is plotted as a […]
What is particle size?
Particle size is the diameter of the particles that make up a soil or an aggregate. It is the most important property by which soil is classified and named, and in concrete technology it helps determine the strength, workability and appearance of the mix. The classification Particle size Name smaller than 0.002 mm clay 0.002 […]
What is an aggregate size fraction?
An aggregate size fraction — also called a grain group — states the smallest and the largest particle size of an aggregate. It is the commercial designation by which sand, gravel and recycled granulate are ordered and delivered. The notation is d/D, where lower-case d is the smallest particle size and upper-case D the largest. […]
What is no-fines concrete?
No-fines concrete is concrete with a coarse aggregate and a deliberately gap-graded particle distribution, leaving open voids of roughly 10 to 30 mm between the particles. Because the fine fraction — the sand — is largely or entirely absent, the aggregate particles do not fill each other’s spaces. The cement forms only a thin skin […]
