Combining an EV charger with solar panels: charging on your own sunshine

Facebook
Twitter
LinkedIn
Pinterest

Combining an EV charger with solar panels comes down to one thing in practice: your charger has to know how much power you have spare at that moment, and adjust its charging output to match. For that you need a smart charger plus a measurement at the meter cupboard (a smart meter link or CT clamps). A basic charger that always runs at full output cannot do this, however many panels you have on the roof.

And from next year this is going to save real money. In the Netherlands the net metering scheme ends on 1 January 2027. From that moment you can no longer offset the electricity you generate against the electricity you use. What you consume yourself becomes worth far more than what you export. That principle holds anywhere export pays less than the power you would otherwise have to buy. An electric car is the biggest appliance in your household, and therefore the easiest way to use up your own solar power.

Below I explain how surplus charging works technically, why it plays out so differently on single phase and three phase, how many kilometres you can genuinely drive off your own roof, what hardware you need, what you may do yourself and what you may not, and what the whole thing costs.

Why this suddenly matters: net metering is ending

The facts first, because the whole calculation hangs on them.

  • The net metering scheme ends on 1 January 2027. Not in stages, but in one go. Up to the end of 2026 you can offset exactly as you are used to.
  • From 2027, consumption and export are settled separately. You get an export payment for what you send back.
  • That payment has to be at least 50 per cent of the bare supply rate until 2030, meaning the electricity price without energy tax and VAT.
  • Suppliers are allowed to charge export fees, capped at the costs they actually incur. The regulator ACM keeps an eye on that.

What that means in plain language: a kilowatt hour you use yourself will soon be worth roughly twice as much as a kilowatt hour you export. Possibly more, if your supplier also charges export fees.

So the question is no longer “how much do I generate”, but “how much do I use myself”. And an electric car is perfect for that: it draws a lot of power, it does not have to be full at a fixed moment, and during the day it is often sitting at home anyway.

How surplus charging works technically

There is a measurement in your meter cupboard watching what flows across your connection. If your house is exporting to the grid at that moment, that is your surplus. The charger receives that figure and raises its charging current by exactly enough to bring the surplus back to zero.

Washing machine kicks in? Surplus drops, charger backs off. Cloud across the sun? Same story. Sun comes through? Charger picks up again.

What you need for that:

  1. A charger that can modulate dynamically. So not just on or off, but continuously from 6 to 16 or 32 amps. A cheap fixed-output charger cannot do this, full stop.
  2. A measurement on your main connection. Usually a link to your smart meter (in the Netherlands the P1 port), or current transformer clamps (CT clamps) around the main cables. Without a measurement your charger knows nothing.
  3. An app or setting where you choose how strict you want to be.

Watch this distinction: a charger that only does load balancing is not the same as a charger that can do surplus charging. Load balancing keeps your main fuse from tripping by lowering the charging current when your house draws a lot. Surplus charging (sometimes called solar charging, eco mode or PV surplus) uses that same measurement the other way round: it only charges from what you have spare. Most chargers that can do the second can also do the first. Not the other way round.

The three charging modes you will actually use

Practically every smart charger works with these three modes, whatever they are called in the app.

Mode What it does When you use it
Fast / maximum Charges at full output, sun or no sun When you have an early start tomorrow
Pure solar / eco Charges only from your surplus, stops when the sun drops out Car is home for a few days
Hybrid / minimum Always tops up to a set minimum charge, the rest from sun Everyday use, and this is the mode you want 90 per cent of the time

That hybrid mode is the practical winner. You set the car to always have at least, say, 50 per cent by six in the morning, and the charger tops up the rest with solar power as soon as it is available. So you always have enough to get going, and you still catch the sun.

The 6 amp problem: why single phase wins here

This is the bit of engineering that almost nobody explains properly, and it decides whether surplus charging makes any sense at your house at all.

A charger cannot charge infinitely low. The charging standard assumes a minimum charging current of 6 amps. Convert that:

  • Single phase charging: 6 A x 230 V = roughly 1.4 kW minimum
  • Three phase charging: 6 A x 3 x 230 V = roughly 4.1 kW
    Minimum solar surplus before charging startsSingle phase (6 A)Single phase (6 A): 1.4 kW1.4 kWThree phase (6 A)Three phase (6 A): 4.1 kW4.1 kW
    A charger cannot go below 6 amps. On three phase that means you need about three times as much spare solar power before the car starts charging.

    minimum

That is a big difference. On single phase your car starts charging as soon as you have 1.4 kilowatts spare. You hit that easily on an ordinary cloudy spring day. On three phase you need 4.1 kilowatts spare before anything happens at all. On a half-clouded day with a 3,000 watt-peak array you simply do not get there, and your car sits waiting all day while your power goes to the grid.

The fix: phase switching. Some chargers can switch automatically between single phase and three phase. Little sun: charge on one phase from 1.4 kW. Plenty of sun: switch automatically to three phases up to 11 kW. That is exactly what you want for surplus charging, and it is the single most important selection criterion if you still have a charger to choose.

Only got single phase in the house? Then that is an immediate advantage for solar charging. You are limited to 3.7 kW (16 A), but you start as low as 1.4 kW. For most people charging at home overnight and at weekends, 3.7 kW is plenty: that is roughly 20 to 25 kilometres per hour of charging.

How many kilometres do you really get off your roof?

Let us do the sums with numbers you can check.

What your car needs. Most electric cars use 15 to 20 kWh per 100 kilometres in real driving. Do the average 12,000 kilometres a year and you land on roughly 1,800 to 2,400 kWh a year.

What your roof delivers. A 400 watt-peak panel produces around 340 to 380 kWh a year in north-west Europe, depending on orientation, pitch and shading. Ten of those panels therefore come to roughly 3,400 to 3,800 kWh a year.

What your car uses and what your roof makes1,800-2,400 kWhYearly use of an electric car at 12,000 km3,400-3,800 kWhYearly output of ten 400 watt-peak panels
In theory ten panels make more than the car needs in a year. In practice you only use part of it, because the sun and the car are not always there at the same time.

But here is the catch: you cannot put all of it into your car. Solar power arrives in summer, during the day, in peaks. Your car is not always there, and in winter your roof delivers very little.

A realistic picture of what an average household with ten panels and an electric car achieves:

Period What happens
April to September Fine. On a sunny day you put 15 to 25 kWh into the car, which is 80 to 150 kilometres. If the car is there.
March and October Reasonable. A few kilowatt hours a day, mostly around midday.
November to February Forget it. Your roof delivers so little that your surplus is close to zero.

Rule of thumb: with ten to twelve panels and a car that sits at home during the day on weekdays, you will drive roughly a third to a half of your annual kilometres straight off your own roof. If your car is parked at work during the week, that drops to 15 to 25 per cent, because then you only catch the weekends.

That may sound disappointing, but run the money: 1,000 kWh a year that you use yourself instead of exporting will quickly be worth 150 to 250 euros a year after 2027, depending on your tariffs. And all you had to do was set it up properly once.

Which charger suits your situation?

Your situation What you want
Single phase connection (35 A or 40 A) Smart 3.7 kW charger (16 A) with dynamic modulation and load balancing. Surplus charging runs most smoothly here.
Three phase connection (3×25 A), few panels (up to about 8) A charger with automatic phase switching. Without that function, surplus charging will do next to nothing for you.
Three phase connection, plenty of panels (12 or more) An 11 kW charger. Phase switching is still nice, but less critical.
Dynamic energy tariff, little sun A charger that can respond to price: charging during the cheapest hours of the night.
Solar panels plus home battery Make sure the battery and the charger are not fighting over the same power. You need an energy manager that sets the priority.

What to look at when choosing:

  • Can it modulate dynamically from 6 to 16 or 32 A, or only switch on and off?
  • Can it switch automatically between single phase and three phase?
  • Does the measurement work through the smart meter or through CT clamps, and is that measurement included or do you have to buy it separately?
  • Can you set a minimum charge level (hybrid mode)?
  • Is the charger open (through a local protocol or an API, for instance), or are you locked into one app and one cloud? If that cloud shuts down in five years, what is left?
  • Is the meter MID certified, in case you ever want to claim business mileage?

Installation: what you may do yourself and what you may not

Honest answer: mounting the charger and running the cable is perfectly good DIY. The connection in the meter cupboard is electrical work you want a qualified electrician for.

What you can prepare yourself:

  • Deciding on the spot and mounting the charger on a solid surface or a charging post
  • Laying a conduit in the ground to where the car parks, at least 60 centimetres deep, with a draw wire in it
  • Clearing the cable route to the meter cupboard and fitting trunking or ducting where needed
  • Making space in the consumer unit (or having it established that the space is not there)

What you get done for you:

  • Running and connecting the dedicated circuit (a charger always belongs on its own circuit)
  • Determining and fitting the right earth leakage protection. Charging points have specific requirements for residual current detection; many modern chargers have DC fault current detection built in, which means a type A RCD can be enough. If not, a type B is needed. Let that be decided by someone who knows the applicable wiring regulations (in the Netherlands, NEN 1010).
  • Sizing the cable. That depends on the output, the cable length and the installation method. Expect substantial material: at 11 kW over a decent distance you are quickly at 6 mm² or thicker.
  • Checking the earthing. Some houses still have an earthing arrangement that is not adequate for a charging point.

Grid capacity. Before you order, check what your main connection is and what it can still take. If you have a 35 A single phase supply and you want a charger, a heat pump and induction cooking, things get tight. Upgrading to 3×25 A is possible, but it costs money, and in parts of the country there are waiting times because of grid congestion. Load balancing is then not a luxury but a necessity: it makes the charger back off when the rest of your house draws power, so your main fuse holds.

Grants. Grant schemes for home charging points change constantly and are often run locally. So do not assume there is nothing available, but do not count on it either. Check your local authority and regional websites before you order to see what is currently running.

Solar panels, charger and home battery: who gets the power?

If you have all three, you get a distribution problem. Your solar power can go to three places: the house, the car or the battery. Without any control they start squabbling, and then you see things like your home battery draining into the car. Which is a waste, because every conversion costs efficiency.

A sensible order of priority:

  1. Direct use in the house (fridge, washing machine, heat pump). Always first, because nothing is lost to conversion here.
  2. The car, if it is there and you need it tomorrow. Straight from roof to battery pack is more efficient than the detour through a home battery.
  3. The home battery, with whatever is left after that.
  4. Export as the last resort.

If you want that handled automatically, you need an energy management system that controls both your charger and your battery. Brands that supply the whole set usually sort it out among themselves. If you have kit from different brands, an open system (a local hub everything connects to, for example) is far less frustrating than three separate apps that know nothing about each other.

What does it cost?

Ranges, including VAT and including fitting unless stated otherwise.

Item Cost
Smart single phase 3.7 kW charger, with dynamic modulation 600 to 1,100 euros
Smart three phase 11 kW charger, with phase switching 900 to 1,700 euros
Installation (dedicated circuit, cable, RCD, up to about 15 metres) 400 to 900 euros
Extra cable length / digging / lifting paving 15 to 40 euros per metre
Smart meter link or CT clamps (if not included) 50 to 250 euros
Extending or replacing the consumer unit 400 to 1,200 euros
Upgrading to 3×25 A (network operator plus electrician) 500 to 1,500 euros, plus higher fixed network charges

What does it return? The premium alone for a smart charger over a dumb one (roughly 200 to 500 euros) is earned back through the kilowatt hours you use yourself instead of exporting after 2027. If you are at 1,000 to 1,500 extra self-consumed kilowatt hours a year, you are talking about a few hundred euros a year and a payback of one to two years on that premium. It is one of the few energy investments where the sum genuinely works out easily.

Mind you: the charger itself does not pay for itself compared with having no charger. You compare that with public charging, and there the gain sits in the lower cost per kWh at home.

Six mistakes that eat your solar gains

  1. Buying a dumb charger “because you can always add something smart later”. That later rarely comes, and a charger that cannot modulate dynamically cannot be made smart.
  2. Three phase charging without phase switching on a small solar array. You simply do not clear the 4.1 kW floor often enough.
  3. Skipping the measurement. Without a smart meter link or CT clamps, your charger has no idea what you have spare, and every solar mode is a pretence.
  4. Leaving it in pure solar mode and then being surprised the car is flat. Use hybrid mode with a minimum charge level.
  5. Always charging the car to 100 per cent. For everyday use, 80 per cent is the usual manufacturer advice, and the last stretch charges slowly anyway, so that is exactly the part that costs you solar power at awkward moments.
  6. Not checking the main connection. You find out on the first cold evening that your main fuse trips when the car, the tumble dryer and the induction hob are all running together.

Frequently asked questions

Can I charge my car from my own solar panels?

Yes, but only with a smart charger that can adjust its output dynamically and that knows what is happening at your connection. The latter runs through a link to your smart meter or through CT clamps in the meter cupboard. Without that measurement your charger simply carries on at full output and takes the difference from the grid.

How many solar panels do I need to charge my car?

If you drive 12,000 kilometres a year, your car uses roughly 1,800 to 2,400 kWh. With ten to twelve panels of around 400 watt-peak you generate enough in theory. In practice you will drive a third to a half of that directly on your own power, because generation and charging do not always coincide and you have almost no surplus in winter.

Does surplus charging work on a three phase charger too?

Yes, but with one important limitation: three phase charging only starts at around 4.1 kW of surplus, against 1.4 kW on single phase. If you have a small solar array, your charger simply will not get going on a lot of days. So choose a charger that can switch automatically between single phase and three phase.

Does anything change when net metering ends?

Yes, and it works in favour of this combination. From 1 January 2027 you can no longer offset the electricity you generate against the electricity you use. You get an export payment that has to be at least 50 per cent of the bare supply rate until 2030, and suppliers are also allowed to charge export fees. That makes a kilowatt hour you use yourself considerably more valuable than a kilowatt hour you export.

Can I connect a charger myself?

Mounting the charger, laying the conduit and preparing the cable route are all fine to do yourself. The connection in the meter cupboard is not: a charger belongs on its own circuit with the right earth leakage protection, and the cable size depends on output, length and installation method. Have that part done by an electrician who works to the applicable wiring regulations.

Do I need a home battery if I have an electric car?

Not necessarily. Your car is already a big battery, and power going straight from your roof into your car loses less than the detour through a home battery. A home battery is mainly interesting if your car is not there during the day, or if you want to play price differences on a dynamic tariff. In both cases, make sure one system sets the priority, otherwise the battery and the charger fight over the same solar power.

What is the difference between load balancing and surplus charging?

Load balancing protects your main fuse: the charger backs off as soon as your house draws a lot of power. Surplus charging uses that same measurement the other way round: the charger only charges with what you would otherwise export. Almost every charger that can do surplus charging also does load balancing, but plenty of chargers with load balancing cannot do surplus charging. Ask about it explicitly.


In short: pick a charger that can modulate continuously and switch automatically between single phase and three phase, fit a measurement on your main connection, set it to hybrid mode with a minimum charge level, and have the connection done by an electrician. Before you order, check what your main connection can handle.

Do that, and you will soon be driving a decent share of your kilometres on power from your own roof, while your neighbour hands their surplus to the grid at half price.

Want to tackle your energy bill more broadly than just the car? The Energie Verpulveraar sets out step by step where the real savings in a house are, from insulation and hot water to using your own generation cleverly. Have a look here.

Greetings from Fred Schouten, builder and DIYer through and through

PS: before you start digging, lay a conduit two sizes too big and pull a draw wire through it straight away. Costs you five euros extra and saves you digging up an entire garden in eight years when you want a thicker cable or a second charging point. Small tip. Big difference.

Related articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Categories

.

Fred’s DIY Plans