An outdoor tap is handy right up until the first frost arrives.
That’s when you suddenly understand why a drain valve isn’t a luxury. Water left sitting in an outdoor pipe can freeze. Ice expands. And then you end up with a split pipe, a leak inside the wall, or a tap that won’t close again come spring.
This article shows you how to make an outdoor tap with a drain valve frost-proof. Just the practical stuff: where the shut-off goes, where the drain point belongs, and how to empty the line in autumn.
The principle
A frost-proof outdoor tap needs three things:
| Component | Function |
|---|---|
| Indoor shut-off valve | Lets you cut off the water supply to the outside. |
| Drain valve | Lets you drain the water from the outdoor section of pipe. |
| Slight downward slope | The pipe needs to drain toward the drain point or outdoor tap. |
Without a drain point, you’re only cutting off the pressure. The water still sits in the pipe.
Before you start
First, check where the existing cold water line runs. If you’re working on drinking water pipes, work cleanly and hygienically. If you’re unsure, or the pipework is unclear, get a plumber to take a look.
| Check | Why it matters |
|---|---|
| Main stopcock accessible | You need to be able to shut off safely. |
| Indoor wall dry | No pipework in damp or frost-prone crawl spaces without protection. |
| Drain point lower than the pipe section | Water needs to be able to run out. |
| Outdoor pipe as short as possible | Less chance of freezing. |
| Tap accessible | You need to be able to open it easily in winter. |
What you’ll need
- outdoor tap;
- wall plate or escutcheon;
- indoor shut-off valve;
- drain valve or shut-off with drain function;
- suitable drinking water pipe and fittings;
- drill and wall sleeve;
- sealing material approved for drinking water;
- bucket or cloth for draining.
Use parts that are approved for drinking water. Not every random tap or hose connector belongs in a fixed drinking water installation.
Step-by-step
- Shut the main stopcock. Open a low tap inside the house to release pressure from the line.
- Decide where the outdoor tap goes. Pick a spot with a short pipe run and enough indoor space for the shut-off and drain valve.
- Drill the wall sleeve hole. Work with a slight downward slope to the outside, or make sure the indoor section drains properly.
- Fit the wall plate. Secure it firmly so the outdoor tap can’t twist later.
- Fit the indoor shut-off valve. Put it in a frost-free spot.
- Fit the drain valve. It belongs on the side of the pipe section you want to empty.
- Connect the outdoor tap. Check all fittings.
- Pressurize and test. Use a dry cloth to check for leaks.
- Test the drain. Shut off inside, open the outdoor tap and drain valve, and check whether the pipe section empties.
Winterizing the tap
Do this before the first frost:
- Close the indoor shut-off valve.
- Open the outdoor tap fully.
- Open the indoor drain valve.
- Let the water run out of the pipe.
- Leave the outdoor tap open during frost.
Water utilities recommend the same basic principle for frost-prone taps: stopcock closed, drain valve open and the outdoor tap open so the remaining water can run out.
Common mistakes
| Mistake | Result | Avoid by |
|---|---|---|
| Only closing the outdoor tap | Water stays in the pipe. | Shutting off inside and draining. |
| Drain valve in the wrong place | Pipe doesn’t empty. | Placing the drain on the section you want to empty. |
| Outdoor pipe in cold crawl space | Freezing risk remains. | Insulating or rerouting to a frost-free path. |
| No leak test | Small leaks only show up later. | Testing under pressure with a dry cloth. |
| Leaving the tap closed in winter | Trapped water can freeze. | Leaving it open outside after shutting off inside. |
Maintenance
Test the shut-off and drain valve every autumn. A valve that hasn’t moved in years can seize up.
Check the wall sleeve too. Cracks in sealant or pointing let water work its way inside. It’s not dramatic at first, but it’s exactly the kind of damage that quietly gets worse.
FAQ
Is a frost-free outdoor tap better?
A frost-free outdoor tap can be a good option, but it still has to be fitted correctly. The shut-off sits deeper inside the wall. With poor installation or insufficient slope, water can still get trapped.
Where do I fit the drain valve?
On the inside, on the pipe section between the shut-off and the outdoor tap. The goal is for that section to drain completely.
Should I insulate the tap?
Insulation helps against the cold, but it doesn’t replace draining. Standing water in an outdoor pipe is still a risk in frost.
Conclusion
A frost-proof outdoor tap comes down to one simple rule: shut the water off inside and make sure the outdoor pipe section can drain.
A drain valve isn’t an extra. It’s the safeguard that keeps you from finding a leak in March.
More DIY guides
Want to learn step by step how to tackle this kind of job properly? Check out the project guides at Fred’s DIY Plans for practical instructions on building, finishing and renovating.
Sources and verification
- Vitens: winter tips, draining the outdoor tap – https://www.vitens.nl/service/wintertips
- Drinking Water Decree and drinking water safety via the Dutch government – https://www.rijksoverheid.nl/onderwerpen/drinkwater
