Silica fume — also known as microsilica — is an extremely fine, amorphous silicon dioxide powder added to concrete to increase strength and density. It is a by-product of silicon and ferrosilicon manufacture, captured as fume in the filters of the furnace off-gas.

The powder is roughly 85 to 97 per cent amorphous silicon dioxide (SiO₂). Its particles are about 0.1 micrometer across, roughly a hundred times finer than cement grains. That extreme fineness is exactly where the effect comes from.

How it works in concrete

Silica fume does two things at once:

  1. Pozzolanic reaction. The amorphous SiO₂ reacts with the calcium hydroxide released during cement hydration, forming additional calcium silicate hydrate — the same phase that gives cement paste its strength. Calcium hydroxide is the weak, leachable component of concrete, so converting it is a double gain
  2. Filler effect. The tiny spheres pack into the voids between cement grains. The particle skeleton becomes far denser and the pores in the hardened paste get smaller

The result is higher compressive strength, sharply reduced permeability, better bond to the aggregate, and greater resistance to chemical attack and chloride ingress. Kilogram for kilogram, silica fume contributes roughly two to three times as much to strength as cement.

Points to watch

Where it is used

Silica fume is mainly used in high-strength concrete, sprayed concrete, abrasion-resistant industrial floors, and elements exposed to severe chemical or marine attack — quay walls, tunnels and containment structures. It is not needed in ordinary housebuilding concrete.

Related terms

Want to learn more about construction terms? Visit our knowledge base at fredsdiyplans.com.

Leave a Reply

Your email address will not be published. Required fields are marked *