What is nail setting?

Nail setting is driving a nail so deep that its head ends up below the surface of the timber. It is usually done with a nail set (nail punch): a steel pin that tapers to a point. In Dutch the technique is called verdrinken (“drowning” the nail) or drevelen, after the drevel, the Dutch word for a nail set.

Set or countersunk?

The difference is small but real. A countersunk head sits flush with the surface or just below it; with screws you get that with a countersink bit and a countersunk screw, no nail set needed. A set nail always sits clearly below the surface, leaving room for filler or finish.

How to set a nail

  1. Drive the nail with a hammer until the head is just above the wood. Do not let the hammer hit the timber, or you will leave dents.
  2. Place the tip of the nail set in the centre of the head, in line with the nail.
  3. Give a few short taps until the head is just below the surface.
  4. Fill the hole with wood filler in a matching colour if needed and sand smooth.

Nails with small heads, such as lost-head or oval nails, work best.

Application

Tips

Related terms

Want to learn more about construction terms? Visit our knowledge base at fredsdiyplans.com.

Leave a Reply

Your email address will not be published. Required fields are marked *