A diaphragm wall is a deep, reinforced-concrete wall cast panel by panel in a slurry-supported trench in the ground, serving as a permanent earth-retaining and/or water-retaining wall for deep excavations, basements, underground car parks or tunnels. It is one of the most widely used techniques for deep underground construction in built-up areas.

How a diaphragm wall is built

Construction proceeds panel by panel, typically 2.5 to 7 metres wide:

  1. Guide walls — two parallel concrete guide walls are cast at the surface; they keep the wall on line and define its top edge
  2. Trench excavation under bentonite slurry — a clamshell grab or hydromill excavates the trench to depths of 20–60 m. At the same time the trench is filled with bentonite slurry, whose density supports the soil walls
  3. Reinforcement cage — a prefabricated rebar cage is lowered into the slurry-filled trench
  4. Concrete placement — concrete is poured through a long tremie pipe from the bottom upward, displacing the lighter bentonite, which is recovered and recycled
  5. Joint waterproofing — joint profiles between panels ensure water-tightnessHow a diaphragm wall is built1Cast guide wallsTwo parallel concrete walls keep the wall on line.2Excavate under bentonite slurryA grab or hydromill digs while slurry supports the soil.3Lower reinforcement cageA prefabricated rebar cage goes into the trench.4Pour concrete via tremie pipeConcrete fills from the bottom up and pushes out the bentonite.5Waterproof the jointsJoint profiles between panels keep the wall watertight.
    Each panel is built in the same order, from guide walls to watertight joints.

    li>

Application

Diaphragm walls are used for:

Advantages

Disadvantages

Related terms

Want to know more about construction terms? Visit our knowledge base on fredsdiyplans.com.

Leave a Reply

Your email address will not be published. Required fields are marked *