A concrete bucket is a funnel-shaped container used to place concrete into formwork. It is moved by crane and discharged from the bottom, usually through a gate or slide operated by a lever. It is mainly attractive where hiring a concrete pump is not economic for the size of the pour. In Dutch site language it is called a kubel.

Sizes

The smallest standard versions hold around 750 litres. The largest buckets in general site use today go up to roughly 3 m³.

When choosing a size, always work back to weight rather than volume. Concrete weighs about 2,400 kg per m³. A 1 m³ bucket therefore hangs on the hook at some 2.4 tonnes, plus its own weight. That load must fit within the crane’s rated capacity at the radius concerned — and at long radius the permitted load drops sharply.

Bucket or pump?

Concrete bucket Concrete pump
Suited to Smaller pours, awkward locations, sites with a crane already standing Large volumes, floor slabs, continuous pouring
Speed Low: fill, lift, discharge, return High and continuous
Cost Bucket hire only, provided the crane is there anyway Mobilisation plus hourly rate
Knock-on effect Crane is tied up during the pour Crane stays free for other work

Working with a bucket

Related terms

More guides and plans available at fredsdiyplans.com

Leave a Reply

Your email address will not be published. Required fields are marked *