If you’ve still got an old analogue electricity meter — that thing with the spinning disc that’s been tracking your energy use for decades — it’s time for an upgrade. The UK’s smart meter rollout is in full swing, and energy suppliers are required to offer every household a smart meter by the end of 2025. Millions of homes have already made the switch, but plenty haven’t. If yours is one of them, there’s never been a better time to get it sorted.
The good news: your energy supplier will install a smart meter free of charge. But there’s more changing in your consumer unit than you might think. And this is a perfect opportunity to check whether the rest of your electrical installation is still up to scratch.
Why is the analogue meter being replaced?
The Ferraris meter is a purely mechanical device from the last century. An aluminium disc spins faster the more electricity you use. Simple, reliable — but not fit for the modern energy grid.
The problem:
- The analogue meter can’t communicate with your energy supplier. Every meter reading has to be submitted manually or read in person.
- It doesn’t distinguish between peak and off-peak usage. Time-of-use tariffs, where electricity is cheaper when there’s plenty of wind or solar energy available, simply aren’t possible.
- With solar panels, the disc just spins backwards. That sounds great (you only pay for net usage), but it causes havoc with billing and grid management.
- The energy grid is becoming increasingly complex. Solar export, home batteries, heat pumps, EV chargers — all of these require meters that measure in both directions and transmit data.
That’s why the government and energy suppliers are pushing hard: every home should have a smart meter.
Smart meter vs. prepayment meter: what’s the difference?
When your supplier offers a smart meter, you’ll get a SMETS2 meter — the latest standard that works across all suppliers. Here’s what it offers compared to your old analogue meter:
| Analogue meter | Smart meter (SMETS2) | |
|---|---|---|
| Measures consumption and export separately | No | Yes |
| In-home display with usage info | No | Yes, included |
| Submit meter readings manually | Yes, you have to do it yourself | No, automatic |
| Sends data to supplier | No | Yes, remotely |
| Compatible with time-of-use tariffs | No | Yes |
| Compatible with home battery/HEMS | No | Yes |
| Privacy | Maximum, no data communication | Data is shared (you can opt out of half-hourly readings) |
My advice: get the smart meter. It’s free, it’s the future, and it unlocks time-of-use tariffs, home energy management, and automatic readings. The only reason to hesitate is privacy, but you can adjust your data sharing preferences with your supplier.
What changes in your consumer unit?
Your energy supplier only replaces the meter itself. But there’s more to consider:
What your energy supplier does:
– Removes the old analogue meter
– Installs a new SMETS2 smart meter
– Checks the connection
– The whole job takes 30 to 45 minutes
What your energy supplier does NOT do:
– Inspect or upgrade your consumer unit
– Replace wiring
– Add extra circuits
– Install surge protection
And that’s exactly where it gets interesting for the DIYer.
Is this the right time for a consumer unit upgrade?
If your supplier is already working on your electrical installation, this is a logical time to take a critical look at the rest of it. Especially if your home is more than 20-25 years old.
Signs your consumer unit needs an upgrade:
- Old rewirable fuses. Still got those round fuses you screw in? They react far more slowly than modern MCBs (miniature circuit breakers) in the event of a short circuit.
- No or only one RCD (residual current device). Modern installations have multiple RCDs — one per floor or zone. That way, a fault doesn’t trip your entire house.
- Too few circuits. Many homes from the 1980s and 1990s have 6 to 8 circuits. With an induction hob, heat pump, EV charger, washing machine, tumble dryer, and dishwasher, that’s not enough.
- No surge protection. Required under the 18th Edition Wiring Regulations (BS 7671:2018, Amendment 2) for new installations and major alterations. Protects your increasingly expensive electronics from voltage spikes.
- You’re planning solar panels, a home battery, or an EV charger. You’ll almost certainly need extra circuits and possibly a heavier supply.
What does a consumer unit upgrade cost?
| Work | DIY | Electrician |
|---|---|---|
| Analogue meter replaced with smart meter | Not permitted (done by supplier) | Free (energy supplier) |
| Consumer unit replacement (12-16 circuits) | Not permitted | £700 – £1,300 |
| Consumer unit replacement (18-24 circuits) | Not permitted | £1,000 – £1,800 |
| Additional circuit | Not permitted | £120 – £250 per circuit |
| Surge protection | Not permitted | £120 – £200 |
| Additional RCD | Not permitted | £80 – £170 |
| Supply upgrade (single-phase to three-phase) | Not permitted (done by DNO) | £500 – £1,500 (DNO) |
As you can see: you’re not allowed to touch the consumer unit yourself. Work on the consumer unit and meter is reserved for registered electricians (Part P of the Building Regulations) and your distribution network operator (DNO). There’s a good reason for that — you’re working with high currents right behind the main supply.
What CAN you do yourself?
The consumer unit is off limits. But there’s plenty of work in and around your home you can do yourself if you’re already looking at your electrics:
| Job | DIY? | Estimated cost (materials) |
|---|---|---|
| Replace a socket | Yes (power off!) | £10 – £25 |
| Add an extra socket to an existing circuit | Yes, but get it inspected | £15 – £40 |
| Fit cable trunking | Yes | £15 – £50 |
| Tidy up consumer unit area and bundle cables | Yes (carefully) | £8 – £15 |
| Install a smart switch or dimmer | Yes | £15 – £40 |
| Connect outdoor lighting (to existing circuit) | Yes | £25 – £65 |
Step-by-step: getting your analogue meter replaced
Step 1: Check which meter you have
Open the cupboard where your meter is and have a look. Can you see a spinning disc or an analogue counter with dials? Then you’ve got a Ferraris meter that needs replacing. Already got a digital display? Then you likely have a smart meter and don’t need to do anything.
Step 2: Contact your energy supplier
Your energy supplier (British Gas, Octopus Energy, OVO, EDF, E.ON, Scottish Power, etc.) should have already offered you a smart meter. If they haven’t been in touch, contact them directly. You can book an installation online or by phone.
Step 3: Book an appointment
Call your supplier or book online. An engineer will come to your home and needs 30 to 45 minutes. You’ll need to be in — the engineer needs access to the meter.
Step 4: Prepare the area
Make sure the meter is freely accessible. No boxes or clutter in front of it. If your meter is behind a cupboard or housing, make sure the engineer can reach it.
Step 5: Check after installation
After installation:
– Check that all circuits still work
– Note the starting reading on the new meter
– Submit the final reading from your old meter to your supplier (though this is usually handled automatically with a smart meter)
– Make sure the in-home display is working and showing your usage
Step 6: Consider additional work
This is the perfect time to have an electrician look at your consumer unit. Get a quote for a consumer unit upgrade if you’ve got old rewirable fuses, too few circuits, or no surge protection. Combine jobs — it saves on call-out charges.
What if you have solar panels?
This is an important point. With an old analogue meter, the disc literally spun backwards when you were exporting. You only paid for the net difference between consumption and generation. That was financially very favourable.
With a smart meter, consumption and export are measured separately. Under the Smart Export Guarantee (SEG), your energy supplier must offer you a tariff for the electricity you export to the grid. However, the export rate is significantly lower than what you pay for electricity you buy.
A worked example: if you export 2,500 kWh per year and the difference between your import tariff and SEG export rate is around 20p/kWh, that’s roughly £500 per year less favourable than the old situation where the meter ran backwards.
What can you do?
- Compare SEG tariffs. The difference between suppliers is significant. Some pay 3p/kWh for export, others 12p or more. Octopus and others offer competitive rates.
- Consider a home battery. Store your own solar energy and use it in the evening. That way you export less.
- Switch to a time-of-use tariff. With a smart meter, you can buy electricity when it’s cheap (during the day, when there’s lots of sun and wind) and avoid peak rates.
- Install a home energy management system (HEMS). It automatically controls your heat pump, immersion heater, EV charger, and home battery based on energy prices and your own generation.
Frequently asked questions
Do I have to pay for the meter replacement?
No. Your energy supplier installs the smart meter completely free of charge. The meter remains the property of the supplier.
Can I refuse?
You can, but there’s no real reason to. Smart meters are not compulsory by law in the UK, but suppliers are obligated to offer them. Refusing means you’ll miss out on time-of-use tariffs and accurate billing.
How long does the replacement take?
On average 30 to 45 minutes. The power will be off briefly during the swap.
Do I need to be home?
Yes. The engineer needs access to your meter.
Will my energy contract change?
Your contract doesn’t change automatically, but a smart meter opens up the possibility of time-of-use and agile tariffs. Contact your energy supplier to discuss your options.
Replacing an analogue electricity meter is straightforward and free. Your supplier handles the whole thing and you get a meter that’s fit for the future. Use this as an opportunity to take a proper look at your entire electrical installation. A smart meter in an outdated consumer unit is like a new engine in a rusty car.
Check out our DIY plans at FredsDIYPlans.com for more home improvement projects.
