Tap water has always been taken for granted. Turn the tap, water flows. But that picture is changing.
Water stress is increasing across Europe and North America. Utility prices rose again in 2026. More and more municipalities require rainwater management in new builds. And water companies are warning of supply problems during hot summers with increasing regularity.
Meanwhile, an average roof in a temperate climate collects 700 to 850 millimetres of rain per year. Right now, that water runs straight down the drainpipe into the sewer. Yet it can easily be used for your toilet, washing machine, garden and more.
In this article I explain how rainwater harvesting works, what it costs, how much you save and how to install it yourself.
What can you use rainwater for?
Rainwater is not suitable as drinking water (it would need to be treated first). But for many household applications it works perfectly well.
| Application | Mains water saved per year | Suitability |
|---|---|---|
| Toilet flushing | 30-40 m3 (about 30% of your usage) | Excellent |
| Washing machine | 10-15 m3 | Good (softer water, less limescale) |
| Garden watering | 5-20 m3 (seasonal) | Excellent |
| Car washing | 2-5 m3 | Excellent |
| Cleaning (floors, windows) | 2-5 m3 | Good |
| Pond / pool top-up | 5-10 m3 | Good |
Total saving: 30 to 80 cubic metres per year, depending on your household and the system you install.
What does that mean financially?
Average water and sewage costs vary by region but typically run $3 to $6 per cubic metre in the US and around £3 to £4 in the UK. At a saving of 50 cubic metres per year, that translates to roughly $150 to $300 annually. That adds up because:
- Water prices rise every year
- If your sewage charge is based on metered water use, you save there too
- The saving is permanent — the system lasts 20 to 30 years
What systems are available?
Level 1: Simple rain barrel (from $50)
The classic rain barrel at the downpipe. Suitable for garden watering.
| Component | Cost |
|---|---|
| Rain barrel 200-300 litres (50-80 gallons) | $50-150 |
| Barrel tap | $10-20 |
| Downpipe diverter | $15-30 |
| Total | $75-200 |
Advantage: cheap, installed in an hour.
Disadvantage: garden use only, limited capacity, freezes in winter.
Level 2: IBC tote or larger storage (from $200)
An IBC tote (275 gallons / 1,000 litres) or multiple barrels linked in series. Suitable for garden and car washing.
| Component | Cost |
|---|---|
| IBC tote 275 gallons | $50-100 (second-hand) |
| Enclosure or screening | $50-200 |
| Pump (optional) | $80-150 |
| Total | $180-450 |
Level 3: Underground tank with house connection (from $2,000)
The full system: an underground tank (500-1,300 gallons), a pump and a separate pipe circuit to the toilet and/or washing machine.
| Component | Cost |
|---|---|
| Underground PE tank 800 gallons | $800-1,500 |
| Pump with pressure control | $300-600 |
| Filters (pre-filter and fine filter) | $100-300 |
| Pipework (separate circuit) | $500-1,500 (depends on distance) |
| Professional installation | $500-1,000 |
| Total DIY | $1,700-3,900 |
| Total professionally installed | $2,500-5,000+ |
Level 4: Fully integrated system ($5,000+)
Tank, pump, UV disinfection, automatic mains top-up when the tank is empty, plus connections to toilet, washing machine and outdoor tap. This is the top-end option for rainwater harvesting.
Building regulations: backflow prevention
The single most important rule you need to know is backflow prevention. Building codes everywhere require that mains water and rainwater can never mix. In practice this means:
- Separate pipework. Rainwater runs through its own circuit. Never connect it to the mains supply.
- Labelling. Pipes and taps carrying rainwater must be clearly marked (“Non-potable” or “Not drinking water”).
- Automatic top-up. If your system tops up from the mains when the tank is empty, it must use an air gap (free air break), not a direct connection.
Have a plumber check the installation if you do it yourself. The rules exist for a reason — cross-contamination can create health risks.
DIY installation: the basic circuit
The most popular DIY project is a rainwater circuit for the toilet.
What you need
- Underground or above-ground tank (at least 400 gallons / 1,500 litres)
- Submersible pump or self-priming pump
- Pre-filter (leaf filter at the downpipe)
- Fine filter (100 micron, before the pump)
- PE pipe (25 mm / 1 inch) or plastic water pipe
- Ball valves and fittings
- Pressure vessel (diaphragm tank) so the pump does not kick in with every flush
Step by step
- Choose the tank location. As close to the downpipe and the house as possible. Underground is ideal (frost-proof, out of sight) but requires excavation.
- Install the pre-filter at the downpipe. This catches leaves and coarse debris.
- Connect the tank to the downpipe via the pre-filter.
- Install the pump — for an underground tank, a submersible pump inside the tank; for an above-ground tank, a self-priming pump next to it.
- Run the pipework from the pump to the toilet. Use a separate circuit — do not connect to the existing water supply.
- Connect the cistern to the rainwater pipe instead of the mains supply.
- Label everything. “Non-potable water” stickers on the pipe and at the cistern valve.
- Test the system. Check for leaks and set the pressure to 1.5-2 bar (22-29 psi).
Maintenance
- Clean pre-filter: every 2-3 months (more often with heavy leaf fall)
- Replace fine filter: annually
- Inspect tank: annually, check for sediment, vacuum the bottom if needed
- Check pump: annually, test pressure and operation
- Keep gutters clean: the cleaner the gutter, the cleaner the water
Rebates and incentives
Many local authorities offer rebates or incentives for rainwater harvesting as part of stormwater management:
- US: Check your city or county water authority — many offer rebates of $50-$200 for rain barrels, and larger incentives for underground systems
- UK: Some water companies offer free water butts or subsidised rainwater harvesting kits
- Australia: State and local rebates for rainwater tanks are widespread
- Check locally: Your water utility or municipality website is the best starting point
Rebates vary from $50 to $2,500. Always apply before you start the installation.
Conclusion
Rainwater harvesting is no longer a luxury — it is a smart investment. With water stress increasing and prices rising, every system becomes more cost-effective over time.
Start small with a rain barrel for the garden ($75, one hour of work). Or go all in: an underground system with toilet connection that saves you 30 to 50 percent on mains water.
It is a project you can do yourself. The technology is straightforward. The saving is permanent. And you are contributing to the solution of a problem that is only getting bigger.
