A prefab garden room is a ready-made unit of 20 to 50 m² that is built in a factory and can be placed on your property within 4-5 weeks. Costs range between €15,000 and €60,000 depending on the size, finish and the level of DIY involved. Compare that with a traditional extension (€30,000-€80,000+) and you can see why prefab garden rooms and modular tiny houses have become so popular. In this article you will learn what a prefab garden room costs, when you can build without planning permission, how to pour the foundation yourself and what insulation values to expect.

What is a prefab garden room exactly?

A prefab garden room is a modular building that is manufactured in a factory and transported to your garden as a whole unit or in large sections. The difference from traditional building is fundamental: where a builder works on site for weeks, a prefab unit is on your property within a single day.

Most prefab garden rooms are constructed from a steel or timber frame with sandwich panels or SIP panels (Structural Insulated Panels). They are delivered with insulation, external cladding, windows and doors — and in some cases with full interior finishing as well.

Typical uses:

What does a prefab garden room cost?

The cost of a prefab garden room depends on the size, insulation level, finish and whether you handle the foundation and utility connections yourself.

Cost overview by type

Type Size Unit price (excl. foundation) Foundation (DIY) Utility connections Total indicative
Basic garden office 15-20 m² €12,000 – €22,000 €1,500 – €3,000 €1,000 – €2,500 €14,500 – €27,500
Modular garden room 25-35 m² €20,000 – €38,000 €2,500 – €4,500 €2,000 – €4,000 €24,500 – €46,500
Prefab tiny house 35-50 m² €30,000 – €55,000 €3,500 – €6,000 €3,000 – €6,000 €36,500 – €67,000
Premium unit (fully finished) 25-40 m² €35,000 – €65,000 €2,500 – €5,000 Included €37,500 – €70,000

Where can you save?

The biggest saving is on the foundation and utility connections. Having a 25 m² concrete slab poured professionally costs €3,500-€6,000 including labour. Doing it yourself costs €1,500-€3,000 in materials. That is a saving of €2,000-€3,000.

You can also save by:

Permitted development: when is it allowed?

This is the question everyone asks first. The answer depends on the size, height and location of the unit on your property.

Permitted development rules (general overview)

A prefab garden room or tiny house on your own property is often permitted development if you meet all of the following conditions:

Condition Requirement
Location Rear or side garden, behind the principal elevation of the main house
Maximum height Typically 2.5 m to eaves (within 2 m of boundary) or 3 m (flat roof) / 4 m (dual pitch) further from boundary
Maximum footprint of outbuildings Must not cover more than 50 % of the garden area; total outbuildings within permitted limits
No residential use Not intended as a self-contained dwelling (no separate address)
Design Some local authorities have additional requirements regarding appearance

Important: the limits apply to all outbuildings combined. If you already have a shed of 20 m² and a carport of 15 m², the remaining permitted area is reduced accordingly.

When do you need planning permission?

Tiny house on your own property: additional rules

If you want to place a tiny house as an independent dwelling on your property, you will almost always need planning permission. You will be dealing with the local development plan, design codes and a formal planning application. Some local authorities are experimenting with tiny house policies and may allow them under certain conditions. Always check with your local planning authority.

Insulation and energy performance

A prefab garden room that you want to use all year round must be well insulated. This is one of the great advantages of prefab: the insulation is installed in the factory under controlled conditions, ensuring consistent quality.

Insulation values by element

Element Minimum (seasonal use) Recommended (year-round) High (near-zero energy)
Floor Rc 2.5 Rc 3.5 Rc 4.0+
Walls Rc 2.5 Rc 4.0 Rc 5.0+
Roof Rc 2.5 Rc 4.5 Rc 6.0+
Glazing Double glazing (U 1.1) Low-e double glazing (U 1.0) Triple glazing (U 0.6)

Commonly used insulation materials

A good prefab garden room with Rc 3.5-4.0 in the walls and Rc 4.5 in the roof can be comfortably heated with a small heat pump or electric heating panel — even in winter.

Pouring the foundation yourself: step-by-step guide

The foundation is the element where you as a DIYer can save the most. Most prefab garden rooms require a flat, stable base. Depending on the soil type and the weight of the unit, you choose either a concrete slab or screw piles.

Option 1: Concrete slab (most common)

A concrete slab of 12-15 cm thick is the standard for prefab garden rooms up to 50 m². This is a job you can do in a weekend with some experience.

  1. Mark the location — set out pegs and string lines. Check the corners for square (3-4-5 method).
  2. Excavate 35-40 cm — remove all topsoil. On clay soil, allow an extra 10 cm of depth.
  3. Lay a drainage/sub-base layer — 15-20 cm of compacted hardcore or crushed aggregate. Hire a plate compactor (€50-€80/day) and compact thoroughly.
  4. Set up the formwork — use planed timber (18 mm plywood or softwood). Check level with a laser level.
  5. Lay membrane and reinforcement — construction-grade polythene as a damp-proof membrane, then steel reinforcement mesh (6 mm, 15 cm grid) on spacers (3-4 cm above the membrane).
  6. Pour the concrete — order ready-mix concrete C20/25. For 25 m² x 0.15 m depth you need approximately 3.75 m³. Budget €100-€130/m³ for ready-mix concrete including delivery.
  7. Vibrate and screed — use a screed rail or straightedge to level the surface. Work quickly: concrete starts to set after 30-45 minutes.
  8. Allow to cure — minimum 7 days, preferably 14 days. Keep the concrete moist (spray in warm weather, cover in rain).

Cost of 25 m² concrete slab (DIY): €1,500-€3,000 (materials + ready-mix concrete + tool hire)

Option 2: Screw piles (for poor ground or fast installation)

Screw piles are steel piles that are screwed into the ground without excavation. Ideal for clay soil, high water table or if you do not want to dig up the garden. A screw pile foundation for a 25 m² unit costs €2,000-€4,000 (including installation by a specialist company). This is not a DIY job — the piles must be driven in by machine.

Option 3: Concrete pad foundations (lightweight units)

For lightweight garden rooms up to 20 m² (timber frame, low weight), you can use concrete pad foundations. Dig a hole of 40x40x40 cm per pad, fill with concrete and allow to cure. Reckon on 6-9 pads for a unit of 15-20 m². Cost: €300-€800 (materials).

Utility connections: electrics, water and drainage

A prefab garden room without electricity is an expensive shed. For most uses you need at least electrics. Water and drainage are optional but essential if you want a kitchen area or WC.

Electrics

The standard approach is to run a separate circuit from the consumer unit in your house to the garden room. You can do part of this yourself:

Cost of electrical connection: €800-€2,500 (depending on distance to the consumer unit and number of circuits)

Water

A water supply to the garden room is laid using PE pipe (25 mm, PN10) at a minimum depth of 60 cm (frost-free). The pipe is bedded in sand.

Cost of water connection: €500-€1,500

Drainage

For a WC or kitchen waste you need a drainage connection. Lay underground drainage pipe (110 mm for WC, 50 mm for kitchen) with a minimum fall of 1 cm per running metre.

Cost of drainage: €600-€2,000

Alternative: For a garden office without water, you can opt for a simpler set-up with electrics only. This saves €1,000-€3,000 and makes the project considerably easier.

The installation process: from order to use

One of the biggest advantages of prefab is speed. While a traditional extension takes 3-6 months, a prefab garden room is in place within 4-5 weeks.

Timeline

Week Activity Who
Week 1 Order, configuration and dimensions confirmed Supplier + you
Week 1-2 Pour foundation and allow to cure You (or contractor)
Week 2-4 Production in the factory Supplier
Week 4-5 Transport and installation (1 day), utility connections Supplier + installer
Week 5 Interior finishing and furnishing You

What do you need to arrange before installation?

Prefab garden room vs traditional building

Aspect Prefab garden room Traditional building
Build time 4-5 weeks (incl. foundation) 3-6 months
Cost (25 m²) €25,000 – €45,000 €35,000 – €70,000
Insulation quality Consistent (factory-built) Variable (depends on workmanship)
Disruption on site Minimal (1 day installation) Weeks of construction traffic and noise
Relocatable Yes (with some constructions) No
Value added Limited (outbuilding) High (extension = floor area)
DIY scope Foundation + utility connections Larger share possible

Frequently asked questions about prefab garden rooms

What does a prefab garden room cost?

A prefab garden room of 25 m² costs €20,000 to €40,000 for the unit itself. Add €2,500-€4,500 for the foundation (DIY) and €2,000-€4,000 for utility connections. In total you come to €24,500 to €48,500 depending on the finish and insulation level.

Is a prefab garden room permitted development?

In many cases, yes. A garden room in the rear or side garden, a maximum of 3 metres high (flat roof) and within the permitted outbuilding limits for your property, is usually permitted development. If you want to use the unit as an independent dwelling, you will almost always need planning permission. Check with your local planning authority.

How long does a prefab garden room last?

A well-built prefab garden room with a steel or timber frame and quality cladding lasts 30-50 years. Lifespan depends on maintenance: timber cladding needs repainting every 5-7 years; aluminium and composite cladding are virtually maintenance-free.

Can I use a prefab garden room as an office?

Yes, a prefab garden office is one of the most popular applications. Ensure adequate insulation (at least Rc 3.5 in the walls), good ventilation, sufficient power sockets and a stable internet connection. A unit of 15-20 m² is ample for a home office with desk, storage and meeting space.

Can I pour the foundation myself?

Yes, pouring a concrete slab is a job you can do yourself with some DIY experience. Allow a weekend’s work for excavation, formwork and pouring, plus 7-14 days of curing time. Material costs for a 25 m² concrete slab are between €1,500 and €3,000.

Can I place a tiny house on my own property?

A tiny house as an outbuilding (no separate address, not for permanent habitation) is often permitted development — provided you meet the standard conditions (rear or side garden, within height and area limits). A tiny house as an independent dwelling requires planning permission and is subject to the local development plan.


Plans and guides

Ready to get started with professional building plans and step-by-step guides? Check out our DIY plans at fredsdiyplans.com for more home improvement projects.

Leave a Reply

Your email address will not be published. Required fields are marked *