Two years ago, Matter was mostly a promise: one protocol that would make all your smart home devices work together, regardless of brand. In 2026, that promise is reality. There are hundreds of certified devices available, IKEA sells Matter-compatible bulbs from around a tenner, and you can use Apple Home, Google Home and SmartThings side by side without anything breaking. The protocol that was supposed to unite the smart home industry is now actually doing so.

But that does not mean you can buy random products and expect everything to run smoothly. The choice between Thread and WiFi matters. Your ecosystem determines what you can and cannot automate. And if you already have a Zigbee or Shelly installation, you will want to know how it can coexist alongside Matter.

This article explains exactly how to set up a Matter smart home in 2026: which hub you need, the difference between Thread and WiFi, how to integrate existing devices, and what a starter setup costs.

What is Matter and why is it relevant in 2026?

Matter is an open standard for smart home devices, developed by the Connectivity Standards Alliance (CSA) — the same organisation behind Zigbee. The difference from earlier protocols: all the major players are at the table. Apple, Google, Amazon, Samsung, IKEA, Philips Hue — they all support Matter.

In practice, this means:

In 2026, Matter supports bulbs, switches, sensors, locks, thermostats, blinds, robot vacuum integrations and cameras, among others. The energy management category (such as EV chargers and solar inverters) has now also been added to the specification.

Thread vs WiFi: which connection do you choose?

Matter devices communicate via two wireless protocols: Thread or WiFi. This is the most important technical distinction to understand before you start buying.

Thread

Thread is a mesh network: each Thread device acts as a router node and strengthens the signal. The more Thread devices you have, the stronger and more reliable your network becomes. Thread devices are energy-efficient, respond quickly and work without the cloud.

You do need a Thread Border Router as a bridge between your Thread network and your WiFi/home network. This is built into, among others:

WiFi

WiFi-based Matter devices work on your existing WiFi network. No extra hub needed — connect directly. The downside: they load your WiFi network, consume more power and offer no mesh functionality.

When to choose what?

Thread WiFi
Speed Very fast (local mesh) Fast (depends on router)
Power consumption Low (battery-powered devices possible) Higher
Scalability Mesh — improves with more devices Loads your WiFi with many devices
Extra hardware needed Thread Border Router No
Best for Sensors, bulbs, switches, locks Plugs, cameras, larger appliances

Advice: Choose Thread if you plan to have more than 10 devices. For a few smart plugs or a camera, WiFi is fine. In practice, you will combine both.

Which ecosystem do you choose as your foundation?

Matter is ecosystem-independent, but you still need a platform as a central place to control your devices and set up automations. The three main options:

Apple Home (via HomePod / Apple TV)

Google Home (via Nest Hub)

Samsung SmartThings

There is no wrong choice. Already in the Apple ecosystem? Choose Apple Home. Google speakers everywhere? Go with Google. Want maximum flexibility and automations? SmartThings.

Which Matter ecosystem fits your home?Already in the Apple ecosystem→Apple HomeGoogle speakers everywhere→Google HomeWant maximum flexibility andautomations→Samsung SmartThings
There is no wrong choice: thanks to Matter multi-admin you can add a second ecosystem later without reconfiguring your devices.

And remember: thanks to Matter multi-admin, you can always add a second ecosystem later without reconfiguring your devices.

Matter vs Zigbee vs Z-Wave vs WiFi: comparison table

Matter (Thread) Matter (WiFi) Zigbee Z-Wave WiFi (proprietary)
Standard Open Open Open Closed (licensed) Various
Hub needed Thread Border Router No Yes (Zigbee hub) Yes (Z-Wave hub) No
Mesh network Yes No Yes Yes No
Multi-ecosystem Yes (multi-admin) Yes (multi-admin) No (hub-bound) No (hub-bound) No (app-bound)
Range Good (mesh) Depends on WiFi Good (mesh) Very good (mesh) Depends on WiFi
Max devices 250+ per network Limited by router 65,000 (theoretical) 232 Limited by router
Power consumption Low High Very low Low High
Local control Yes Yes Yes (via hub) Yes (via hub) Often cloud-dependent
Device choice (2026) Large and growing Large Very large Limited Very large
Future-proofing High High Stable, but less investment Uncertain Fragmentation
Entry price From £9 From £13 From £9 From £25 From £9

The takeaway: Matter with Thread is the best choice for new installations in 2026. Zigbee remains relevant if you already have a setup. Z-Wave is expensive and increasingly niche. WiFi devices with proprietary protocols (Tuya, Tapo) are cheap but fragment your system.

Integrating an existing installation: Zigbee and Shelly

Keeping Zigbee devices

Already have Philips Hue bulbs, IKEA TRADFRI devices or Aqara sensors? Good news: you do not need to replace them.

Note: the devices appear as “bridged” in Matter. This works, but with slightly more latency than native Thread devices.

Keeping Shelly devices

Shelly is a popular brand among DIYers thanks to its compact WiFi switches that fit behind existing light switches. Shelly’s newer generation (Gen 3+) supports Matter via a firmware update.

To enable Matter on a Shelly Gen 3:

  1. Open the Shelly app and ensure the firmware is up to date
  2. Go to the device → Settings → Matter
  3. Enable Matter and scan the QR code with your ecosystem app

Older Shelly devices (Gen 1 and Gen 2) do not support Matter. You can continue using them via the Shelly app or via Home Assistant as an intermediary solution.

Home Assistant as a universal bridge

Have a mix of protocols? Home Assistant is the Swiss army knife of smart home. It supports Zigbee, Z-Wave, WiFi, Bluetooth and Matter — and can act as a Matter bridge for devices that do not speak Matter natively.

A Raspberry Pi 5 with Home Assistant and a SkyConnect USB stick (£30) gives you Zigbee, Thread and Matter support in a single device.

What does a Matter starter setup cost?

Three scenarios, from basic to comprehensive:

Scenario 1: Basic (making one room smart) — approx. £110

Component Example Price
Thread Border Router IKEA DIRIGERA £50
3x smart bulbs IKEA TRADFRI E27 (Matter) 3x £9 = £27
1x motion sensor IKEA VALLHORN £13
1x smart plug Eve Energy (Thread) £22
Total £112

Scenario 2: Whole house basics (3-4 rooms) — approx. £300

Component Example Price
Thread Border Router Apple HomePod Mini £95
6x smart bulbs Mix of IKEA + Nanoleaf Essentials £68
2x smart plug Eve Energy (Thread) £44
2x motion sensor Eve Motion (Thread) £52
1x door/window sensor Eve Door & Window £30
1x smart lock Yale Linus L2 (Matter) £190*
Total (excl. lock) £289

*The smart lock is optional but a popular addition.

Scenario 3: Comprehensive (whole house + automation) — approx. £500-700

Component Example Price
Hub + automation Home Assistant Yellow or RPi5 + SkyConnect £110
2x Thread Border Router Apple HomePod Mini + IKEA DIRIGERA £145
10x smart bulbs Mix of brands £100
4x Shelly switch Shelly Plus 1 Mini Gen 3 (Matter) £52
3x sensor Mix of motion + door/window £68
1x smart thermostat tado° (Matter) or Netatmo £110
Total £585

5 tips to avoid pitfalls

  1. Always check whether a device is Matter-certified. Some manufacturers advertise “Matter-ready” but only deliver a firmware update later. Look for the Matter logo on the packaging or check the official Matter product directory.

  2. Do not buy only WiFi Matter devices. A house full of WiFi devices overloads your router. Choose Thread where possible and WiFi only for devices that need it (cameras, larger appliances).

  3. Have at least two Thread Border Routers. One is enough to get started, but two gives you redundancy. If your HomePod Mini goes down, your IKEA DIRIGERA or Google Nest Hub takes over the mesh network.

  4. Update firmware before pairing. Many problems when pairing Matter devices stem from outdated firmware. Update everything first via the manufacturer’s app.

  5. Start small, build out. Begin with one room and learn how automations work in your chosen ecosystem. Expand from there. This saves both frustration and money.

Frequently asked questions

Does Matter work without internet?

Yes. Matter devices communicate locally via Thread or WiFi. You can switch lights, read sensors and run automations without an internet connection. Voice assistants (Siri, Google Assistant) do require internet.

Can I link Matter devices to multiple ecosystems at the same time?

Yes, this is called multi-admin. You can control the same bulb via Apple Home and Google Home. Not all devices support this equally well — check the manufacturer’s specifications.

Do I need to replace my Zigbee devices?

No. Zigbee hubs from Philips Hue, IKEA and Aqara act as Matter bridges. Your existing devices continue to work and become visible in Matter ecosystems via the bridge.

Is Thread the same as Matter?

No. Thread is the wireless network protocol (the connection). Matter is the application protocol (the language). Matter can communicate over Thread or WiFi. Think of it like a website (Matter) that is accessible via fibre broadband or 4G (Thread or WiFi).

What about Bluetooth devices?

Matter uses Bluetooth Low Energy (BLE) only for the initial pairing process (commissioning). After that, the device switches to Thread or WiFi for daily use.

Conclusion

Matter in 2026 is no longer a future prospect — it is the standard. With devices from as little as £9, broad ecosystem support and the ability to integrate existing Zigbee and Shelly installations, there is no reason to wait any longer. Choose your ecosystem, pick up a Thread Border Router, and start small. In a few months, you will wonder how you ever managed without it.

Check out our DIY plans at FredsDIYPlans.com for more home improvement projects.


Source: Tink.nl — Step by step: how to install a Matter smart home without the headaches

Leave a Reply

Your email address will not be published. Required fields are marked *