You install a sedum roof in five layers on a waterproof, slightly sloping roof (max. around 35 degrees): a root barrier, a drainage layer, a filter fleece, substrate and the sedum planting itself. Expect a weight of 40 to 70 kg per m² when saturated, a thickness of 6 to 9 cm, and costs of 40 to 75 euros per m² if you do it yourself. On an average garden shed or outbuilding of 6 to 15 m² you’ll be busy for 1 to 2 hours. In 2026 many local councils offer grants of 10 to 60 euros per m².

Sedum roof at a glance40-70 kg/m²Saturated weight the roofmust carry6-9 cmTotal thickness of the fivelayers€ 40-75 per m²Cost if you install ityourself€ 10-60 per m²Council grant available in2026
Key figures for a DIY sedum roof in 2026.

Below you’ll read exactly how to do it, what your roof needs to carry, and how to avoid throwing money down the drain.

What exactly is a sedum roof?

Sedum is the collective name for succulents: low, fleshy little plants that cope well with drought. They store water in their leaves and need very little soil.

That’s exactly why they’re ideal for a roof. You lay a thin layer of growing medium (substrate) and the sedum grows on top of it into a green, sometimes flowering blanket.

A sedum roof belongs to the category of extensive green roofs: light in weight and low in maintenance. That’s something quite different from a roof garden with grass and shrubs, which we’ll come back to later.

Why install a green roof yourself?

A sedum roof isn’t just good-looking. It genuinely delivers.

And laying a green roof yourself is very doable. On a garden shed or outbuilding it’s a classic weekend job.

Is my roof suitable for a sedum roof?

Before you order anything, check three things: load-bearing capacity, roof pitch and waterproofing.

Load-bearing capacity: how many kg per m² does the roof need to carry?

This is the most important check, and exactly the step most people skip.

A sedum roof weighs 40 to 70 kg per m² when it’s saturated with water. That saturated weight is the figure you plan around, not the dry weight.

Type of system Saturated weight Suitable for
Light sedum system (mats) 45-50 kg/m² Light shed and garden room roofs
Standard sedum system 50-60 kg/m² Sturdy sheds and garages
Biodiverse system (sedum + herbs) 80-85 kg/m² Roofs with a demonstrably strong structure

Rule of thumb: from around 80 to 85 kg per m² you should have the structure checked or reinforced.

Most garden sheds and outbuildings with decent roof joists carry a light sedum system without modification. Unsure about an older or self-built shed? Have a builder or structural engineer take a quick look. A collapsed roof costs you far more than that advice.

Roof pitch: flat or sloping roof?

Sedum grows best on a flat to slightly sloping roof. The steeper it gets, the greater the chance that substrate and mats slide downwards.

System Maximum roof pitch
Biodiverse / herb system approx. 5 degrees
Standard sedum mats approx. 15 degrees
Sedum cassettes / trays up to approx. 25 degrees
Absolute upper limit with anchoring approx. 35 degrees

A minimal fall of 1 to 2 degrees is actually desirable, so excess water can drain away. A bone-dry, dead-level flat roof with no fall gives you puddles.

For a roof steeper than 15 degrees, choose cassettes or fit cross battens or an anti-slip structure to stop sliding.

Waterproofing: is your roof covering up to scratch?

Under the sedum, your roof simply has to be 100% waterproof. EPDM, bitumen or a plastic roof covering with no leaks is fine.

Is your roof covering due for replacement? Then do that first. Tracking down a leak under a green roof is an annoying, expensive job.

Important: not every roof covering is root-resistant. If you’re in doubt, you lay a root barrier anyway. More on that shortly.

The build-up of a sedum roof: 5 layers explained

A good sedum roof is built up from layers that each have a function. From bottom to top:

  1. Root barrier (root membrane or film). Protects your roof covering against roots growing through. Not needed if your roof covering is already root-resistant, but worth it if you’re in doubt.
  2. Drainage layer. Carries off excess water and buffers part of it at the same time. Often a dimpled membrane or drainage mat.
  3. Filter fleece. Holds back fine substrate particles, so your drainage and downpipe don’t clog up.
  4. Substrate layer. The growing medium, lightweight and free-draining. Usually 4 to 6 cm thick.
  5. Sedum layer. The planting: mats, cassettes or loose cuttings.

The total thickness of the system comes to 6 to 9 cm, depending on the system.

Don’t skip a layer. Forgetting the filter fleece seems harmless, but after a few downpours it leads to a clogged drain.

Sedum mats, cassettes or loose cuttings?

There are three ways to get your sedum. Here’s the difference.

Method How it works Advantage Disadvantage
Sedum mats Ready-made mats with sedum on top, roll out like turf Fast, instant green result Slightly higher material price
Sedum cassettes / trays Plastic trays with substrate and sedum inside, with integrated drainage Ideal on a steeper roof, little preparation More expensive per m²
Loose cuttings You scatter cuttings over the substrate Cheapest Patience needed, only full after a season

For most DIYers on a garden shed, sedum mats are the most pleasant choice: green straight away and easy to lay.

Want a cheap green roof and have patience? Then loose cuttings on substrate are the most economical route.

Installing a sedum roof on a shed or garden room: step-by-step guide in 8 steps

Here’s how to tackle it. Expect 1 to 2 hours for a shed of 5 to 15 m², and 2.5 to 4 hours for a larger garage up to 40 m².

Step 1: Inspect and clean the roof.
Check the load-bearing capacity and waterproofing. Sweep away moss, leaves and dirt. Repair any damage to the roof covering first.

Step 2: Fit the root barrier.
Only if your roof covering isn’t root-resistant, or if you’re in doubt. Lay the membrane with plenty of overlap and let it run up slightly at the edges.

Step 3: Lay the drainage layer.
Roll the drainage mat or dimpled membrane out across the whole roof. Make sure water can flow towards the outlet.

Step 4: Fit the filter fleece.
Lay the fleece over the drainage layer with an overlap. This keeps the substrate in place.

Step 5: Spread the substrate evenly.
Spread a layer of 4 to 6 cm evenly. Rake it smooth. Using cassettes? Then skip this step, because the substrate is already in them.

Step 6: Lay the sedum mats or cassettes.
Lay the mats tightly against each other, with no gaps. Cut them to fit around outlets and edges.

Step 7: Keep the edges and outlets clear.
Lay a gravel strip or edge profile along the roof edge. Keep about 10 cm of coarse gravel clear around the rain outlet and fit a leaf guard (balloon grating) in the downpipe. That prevents blockages.

Step 8: Water immediately.
Give the fresh sedum a good soak straight away, whatever the weather. The little plants need to take root.

Rooting in and watering in the first weeks

A freshly laid sedum roof needs time to root in. Don’t underestimate that.

Once it’s rooted in, sedum largely looks after itself. Only during prolonged drought do you top up the watering.

What does a sedum roof cost? Cost per m² in 2026

Green roof costs depend on the system and on whether you do it yourself. Figures for 2026:

Situation Price per m²
DIY, loose cuttings on substrate from approx. 25-43 euros
DIY, complete sedum system with mats 45-75 euros
DIY, sedum cassettes 55-75 euros
Installed by a specialist (incl. fitting) 65-100 euros
Biodiverse / herb roof 60-100 euros
Intensive green roof / roof garden 110-150+ euros

By way of illustration, the total costs for a roof of 50 m²:

When you have it installed, the price roughly breaks down into 45% materials, 40% labour, 10% preparation and 5% disposal. Do it yourself and you save that labour share: often 30 to 40 percent.

Where the money goes when a specialist installs itMaterials: 45%45%Labour: 40%40%Preparation: 10%10%Disposal: 5%Materials — 45%Labour — 40%Preparation — 10%Disposal — 5%
Doing it yourself removes the labour share of the bill.

Watch out for the hidden costs: if you replace the roof covering (EPDM approx. 70-95 euros/m²) or reinforce the structure, the bill climbs fast. That’s exactly why that load-bearing check up front matters so much.

Green roof grants 2026: up to 60 euros per m² back

This makes a green roof a good deal cheaper, and almost nobody uses it to the full.

In 2026, more than 80 Dutch local councils offer a grant on a green roof. The amounts lie between 10 and 60 euros per m², with an average of around 20 to 35 euros per m².

The more water your roof holds back and the more biodiverse the planting, the higher the contribution. So a biodiverse roof often pays back more than a bare sedum roof.

A few examples:

Common conditions:

  1. Apply before you start. Almost everywhere the grant has to be applied for or awarded before you lay the first mat. So apply first, then get to work.
  2. Minimum surface area: often 6 to 25 m².
  3. Minimum water storage: usually 20 to 50 litres per m².
  4. Maintenance obligation: you often have to keep the roof in place for at least five years.

In 2026 there’s still no national scheme. Combining is allowed though: a council grant can often be stacked with a scheme from your water authority or province.

Always check the current scheme of your own council, because conditions and amounts differ from place to place and the budget sometimes runs out.

Maintaining a sedum roof

An extensive sedum roof is deliberately low-maintenance, but zero maintenance doesn’t exist.

A well-installed sedum roof lasts for decades and, in the meantime, protects the roof covering underneath.

Frequently asked questions about installing a sedum roof

Can I lay a sedum roof on any shed or garden room?

Almost, as long as the roof is waterproof, slightly sloping (ideally under 15 degrees for mats) and can carry a saturated weight of 40 to 70 kg per m². With an older or self-built shed, just check the load-bearing capacity before you start.

How much does a sedum roof weigh per m²?

Saturated with water, a light sedum roof weighs 45 to 50 kg per m² and a standard system 50 to 60 kg per m². A biodiverse system with herbs comes to 80 to 85 kg per m². Always work with the saturated weight, not the dry weight.

What does it cost to install a sedum roof yourself?

With a complete sedum system including mats you pay 45 to 75 euros per m² for materials. Loose cuttings on substrate you’ve laid yourself are cheaper, from around 25 euros per m². Having it installed costs 65 to 100 euros per m².

Do I need a root barrier?

Only if your roof covering isn’t root-resistant. If you’re in doubt, lay one anyway, because it’s cheap and prevents expensive damage to your roof covering from roots growing through.

How much maintenance does a sedum roof need?

Little. Remove weeds and leaves once or twice a year and check the outlet, plus feed it yearly in spring. If you have it done, a visit costs 5 to 12 euros per m².

Can I lay a sedum roof on a flat roof with no fall?

Yes, but a minimal fall of 1 to 2 degrees is better, so excess water drains away. On a completely level roof you use a good drainage layer to prevent puddling.


Building plans and guides

A sedum roof succeeds or fails in the preparation: the right load-bearing capacity, the right fall and a solid plan. Want to build or convert your shed or garden room properly from the start? Take a look at the complete building plans package at fredsdiyplans.com, with thousands of plans for every DIY project.

Leave a Reply

Your email address will not be published. Required fields are marked *