Your garage is full of things that do not belong there. Boxes from three house moves ago, a broken exercise bike, and somewhere at the back a workbench you have been meaning to use for years. Sound familiar? Then it is time to convert that garage into a workshop you can actually use.
Converting a garage into a workshop is one of the most rewarding projects you can take on as a DIY enthusiast. You create your own space to build, tinker, weld or simply work in peace, without turning the entire house upside down. And the best part: most of the modifications can be done yourself. No contractor needed, no weeks-long renovation.
In this article, you will learn exactly how to set up a garage as a workshop, what it costs, which permits you may need and how to tackle it step by step.
Permits and regulations: what is and is not allowed?
Before you drive in the first screw, you will want to know whether you need a permit. The short answer: in most cases, no. As long as you are not enlarging the garage, not removing load-bearing walls and not changing the designation from “storage/garage” to “living space,” you fall under permit-free building in the Netherlands (vergunningsvrij bouwen). Similar exemptions generally apply in the UK and elsewhere, though specifics vary by local authority.
What you do need to watch out for:
Zoning plan. A workshop for personal use is generally not a problem. If you want to turn it into a commercial workshop (think a furniture-making business or a car garage receiving customers), that may conflict with the zoning plan. Check with your local council.
Homeowners’ association rules. If you have a garage in a shared ownership complex, you may need permission from the association, especially if you are making changes to the electrics or the exterior.
Noise regulations. A workshop makes noise. In a residential area, noise regulations apply. Heavy machinery such as a belt sander or table saw can cause disturbance. Consider soundproofing if you regularly work with power tools.
Fire safety. Do you store flammable substances (lacquers, solvents, petrol)? Ensure you have a fire extinguisher (cost: 25 to 50 euros) and adequate ventilation. A smoke detector in the workshop is a sensible precaution.
The floor: the foundation of your workshop
The garage floor is the starting point of any conversion. A bare concrete floor is cold, dusty and difficult to keep clean. With the right floor coating or covering, you turn it into a workspace you can comfortably stand on.
Garage floor coating (epoxy)
Epoxy floor coating is the most popular choice for a garage workshop, and rightly so. It protects the concrete against oil, grease and chemicals, is easy to clean and gives your garage a professional look.
Material cost: 15 to 30 euros per square metre. For a standard garage of 18 m2, that works out at 270 to 540 euros in materials.
Application: lightly sand the concrete floor, vacuum thoroughly, and apply the epoxy with a roller. Most coatings require two layers with 12 to 24 hours drying time between them. After 48 to 72 hours, the floor is fully loadable.
Note: a concrete floor with moisture problems (rising damp) must first be treated with a damp-proof primer. Primer cost: 8 to 15 euros per square metre.
PVC interlocking tiles
An alternative to coating is PVC interlocking tiles. You click them together like a jigsaw, directly on the concrete. No drying time, no preparation needed.
Cost: 20 to 45 euros per square metre, depending on quality. For 18 m2, you pay 360 to 810 euros.
Advantages: ready for immediate use, provide insulation from the cold floor beneath, and if you move house you can take them with you. Disadvantage: dirt can accumulate in the joints.
Concrete paint (budget)
The cheapest option. Concrete paint protects the surface and adds colour, but is less hard-wearing than epoxy. Suitable if you use the workshop lightly.
Cost: 5 to 10 euros per square metre. Total for 18 m2: 90 to 180 euros.
Workbench: the heart of your workshop
Without a solid workbench, you do not have a workshop. The workbench determines how comfortably and efficiently you work. So invest in quality here.
Build or buy?
Building your own gives you a bespoke workbench. Use timber posts (70 x 70 mm) for the legs and a solid hardwood or plywood top at least 30 mm thick. Material costs: 150 to 350 euros. Build time: one weekend.
A ready-made workbench from brands such as Wolfcraft, Kupper or Festool costs 200 to 800 euros, depending on size and quality. Advantage: ready to use immediately. Disadvantage: you are limited to standard dimensions.
Dimensions
Height: 85 to 95 cm, depending on your body height. The rule of thumb: when you stand beside the workbench with your arms straight down, the top should be at wrist height.
Depth: at least 60 cm, preferably 80 cm. This gives you room for a bench vice on the front edge and space for larger workpieces.
Width: at least 150 cm. If you have the space, go for 200 to 250 cm. You always need more workspace than you think.
Bench vice
A workbench without a bench vice is like a kitchen without a worktop. A decent parallel bench vice (jaw width 150 mm) costs 60 to 150 euros and is essential for anyone working with wood.
Tool wall: everything within reach
A tool wall is the difference between a cluttered garage and an organised workshop. You can see at a glance where everything hangs, your tools are immediately to hand and your work surface stays clear.
Pegboard (perforated panel)
The classic solution. Perforated steel panels with matching hooks, holders and bins. You screw the panel to the wall and hang your tools on metal hooks.
Cost: 50 to 120 euros for a panel of 100 x 60 cm, including hook set. For a full wall (200 x 100 cm), expect 120 to 250 euros.
French cleat system
Increasingly popular among DIY enthusiasts. The system works with wooden battens sawn at a 45-degree angle. You make holders and shelves that you can hang and reposition anywhere on the wall.
Cost: 30 to 80 euros in timber. Most of the work is in making the holders, but that is a fun project in itself.
Advantage: entirely customisable. You can add, move or remove holders without drilling new holes.
Magnetic strip
For small hand tools (chisels, screwdrivers, spanners), a magnetic strip is a clever addition. Cost: 15 to 40 euros per 50 cm strip.

Lighting: underestimated but essential
In most garages, there is a single bulb hanging from the ceiling. That is wholly insufficient for working safely and accurately. Good lighting is one of the most important investments in your workshop.
General lighting
Use LED batten fittings (also called LED strip lights) on the ceiling. Choose a colour temperature of 4000 to 5000 Kelvin (daylight) and a luminous flux of at least 4000 lumens per fitting.
Rule of thumb: aim for 500 lux at the work surface. For an 18 m2 garage, you need two to three LED fittings.
Cost: 25 to 60 euros per fitting. Total: 50 to 180 euros for complete lighting.
Task lighting
In addition to general lighting, you want directed lighting above your workbench. An adjustable LED work lamp mounted on the wall or workbench gives shadow-free light precisely where you need it.
Cost: 30 to 80 euros per lamp.
Daylight
Does your garage have a window, or can you fit one? Natural light makes working more pleasant and saves electricity during the day. A roof light or skylight in a flat garage roof costs 200 to 500 euros including installation.
Expanding the electrics: safely and with sufficient capacity
A standard garage often has just one or two sockets and a single light point. For a workshop, that is not enough. Running a table saw, compressor and dust extractor simultaneously demands a beefier installation.
What you need
At least 4 to 6 double sockets, distributed around the workshop. Place two above the workbench, two on the side walls and two near the machinery.
A separate circuit in the consumer unit for the workshop, preferably 16 Amps. This prevents you from sharing a circuit with the kitchen or living room and tripping the breaker when you switch on a heavy machine.
A residual current device (30 mA) is mandatory and protects against electrocution.
DIY or electrician?
Adding extra sockets to an existing circuit is something you can do yourself if you are a competent DIYer, provided you turn off the power and know what you are doing. Installing a new circuit in the consumer unit should always be left to a qualified electrician. Cost for an electrician: 200 to 500 euros for an additional circuit with 4 to 6 sockets.
Climate and insulation: working all year round
An uninsulated garage is freezing cold in winter and boiling hot in summer. If you want to work there comfortably all year round, some form of insulation and heating is essential.
Wall insulation
Fit PIR insulation boards (40 to 60 mm thick) against the internal walls and finish with OSB board or plasterboard. PIR offers the highest insulation value per centimetre, so you lose as little space as possible.
Cost: PIR boards 15 to 25 euros per square metre, finishing board 8 to 15 euros per square metre. Total for four walls of a standard garage (approximately 40 m2 of wall area): 920 to 1,600 euros.
Garage door insulation
You lose the most heat through the garage door. An insulation kit for up-and-over doors (reflective foil with bubble wrap layer) costs 40 to 80 euros and can be fitted in an afternoon. The effect is noticeable: the temperature in the garage rises by 3 to 5 degrees in winter.
Heating
An infrared panel is ideal for a workshop. It heats objects and people directly, not the air. This means you feel the effect immediately, even in a space that is not perfectly insulated.
Cost: 150 to 350 euros per panel (700 to 1000 Watts). A 700-Watt panel is sufficient for a work area of 6 to 8 m2.
A paraffin heater (100 to 200 euros) is a cheaper alternative, but watch the ventilation. Never use a paraffin heater in an enclosed space without adequate air supply.
What does it cost to convert a garage into a workshop?
The total cost depends heavily on how far you go. Below is an overview for a standard garage of 18 m2.
Basic setup (functional)
| Component | Cost |
|---|---|
| Floor coating (epoxy) | 270 – 540 euros |
| Workbench (self-built) | 150 – 350 euros |
| Tool wall (pegboard) | 120 – 250 euros |
| Lighting (2-3 LED fittings) | 50 – 180 euros |
| Electrics (extra sockets, DIY) | 50 – 100 euros |
| Total basic setup | 640 – 1,420 euros |
Extended workshop (comfortable)
| Component | Cost |
|---|---|
| PVC interlocking tiles | 360 – 810 euros |
| Workbench (ready-made, quality) | 400 – 800 euros |
| Tool wall + French cleat | 150 – 300 euros |
| Lighting (LED + work lamp) | 100 – 260 euros |
| Electrics (new circuit, electrician) | 200 – 500 euros |
| Wall insulation + finishing | 920 – 1,600 euros |
| Heating (infrared panel) | 150 – 350 euros |
| Total extended | 2,280 – 4,620 euros |
The basic setup can be completed in a weekend. The extended version you spread over several weekends. The beauty of a garage workshop is that you can expand step by step. Start with the floor, workbench and lighting. Add the rest when the budget allows.
Frequently asked questions
Do I need a permit to convert my garage into a workshop?
For personal use, usually not, as long as you do not alter the structure and the building does not change its designated use. Commercial use may require a permit. If in doubt, contact your local council. In the Netherlands, this falls under “vergunningsvrij bouwen”; similar rules exist in the UK and other countries but vary by area.
Which floor is best for a garage workshop?
Epoxy floor coating offers the best value for money. It is hard-wearing, resistant to oil and chemicals, and gives a professional look. PVC interlocking tiles are the best alternative if you want to avoid drying time.
How do I prevent moisture problems in the garage?
Ensure ventilation (a grille in the garage door or wall), treat the concrete floor with a damp-proof primer before applying coating, and install insulation with a vapour barrier on the warm side.
Can I use heavy machinery such as a table saw in the garage?
Yes, provided your electrics are adequately rated. A table saw draws 1,500 to 2,500 Watts. Ensure a separate 16-Amp circuit and do not use extension leads with too low a power rating.
How much does it cost to insulate a garage?
For a standard garage of 18 m2, you pay 920 to 1,600 euros in materials for wall insulation with finishing. Insulating the garage door costs an additional 40 to 80 euros. You recoup the investment through lower heating costs and a workshop that is usable all year round.
What is the difference between a pegboard and a French cleat system?
A pegboard is a ready-made steel wall panel with hooks. A French cleat system is built from wooden battens at a 45-degree angle. The pegboard is quicker to mount; the French cleat is more flexible and cheaper, but requires more building work.
Conclusion
Converting a garage into a workshop is a project you can tackle step by step. Start with the basics: a good floor, a solid workbench and sufficient lighting. That alone transforms your garage from a dumping ground into a place where you enjoy working.
Costs range from 640 euros for a functional basic setup to over 4,500 euros for a fully insulated and equipped workshop. Most of the work you can do yourself. Only for the electrics (a new circuit in the consumer unit) do you bring in a professional.
Approach it as a project. Clear out first, then lay the floor, build your workbench, hang your tool wall and expand from there. In a few weekends, you will have a workshop that gives you years of enjoyment.
Check out our DIY plans at fredsdiyplans.com for more home improvement projects.
