Building a wardrobe yourself costs between €200 and €800 in materials, depending on the type, dimensions, and material choice. Having a comparable wardrobe custom-built will easily cost €1,500 to €4,000. That means you save 50 to 70 percent, and you get exactly the layout that suits your clothing and space. In this article, you’ll learn which type of wardrobe best fits your situation, what materials you need, and how to build a sturdy closet step by step with a professional finish.
What Does It Cost to Build a Wardrobe?
The cost depends on three factors: the type of closet, the material, and the interior layout (shelves, rod, drawers). Here’s an overview per variant.
Material Costs by Wardrobe Type
| Wardrobe Type | Dimensions (w x h x d) | Cost MDF | Cost Plywood | Cost Solid Wood |
|---|---|---|---|---|
| Single wardrobe (1-door) | 60 x 200 x 60 cm | €150 – €250 | €200 – €350 | €350 – €550 |
| Standard wardrobe (2-door) | 120 x 200 x 60 cm | €250 – €400 | €350 – €550 | €500 – €850 |
| Wide wardrobe (3-door) | 180 x 200 x 60 cm | €350 – €550 | €500 – €750 | €700 – €1,200 |
| Built-in wardrobe (180 cm alcove) | 180 x 250 x 60 cm | €200 – €400 | €300 – €500 | €450 – €800 |
Prices include sheet or lumber material, screws, dowels, and basic hardware. Excludes doors (for built-in), drawer slides, and finishing.
DIY vs IKEA vs Custom-Made
| DIY | IKEA PAX | Custom Furniture Maker | |
|---|---|---|---|
| Cost (2-door, 120 cm) | €250 – €550 | €400 – €700 | €1,500 – €3,000 |
| Cost (built-in, 180 cm) | €300 – €600 | €600 – €1,100 | €2,000 – €4,000 |
| Time investment | 8 – 16 hours | 3 – 6 hours (assembly) | 0 hours (installed for you) |
| Custom sizing | Yes, fully | Limited (standard sizes) | Yes, fully |
| Material quality | You decide | Particleboard with melamine | Usually MDF or plywood |
| Layout adjustable | Yes, fully | Limited (accessories) | Yes, fully |
| Lifespan | 15 – 30+ years | 5 – 15 years | 15 – 25 years |
The difference is clear: IKEA is fastest, custom-made is most expensive, and DIY gives you the best price-quality ratio. Especially with a built-in wardrobe you save significantly, because you use the walls, floor, and ceiling of the alcove as closet structure and need less material.
What Type of Wardrobe Will You Build?
Before buying material, decide which type of wardrobe you want to build. Each type has different requirements for construction and difficulty level.
Wardrobe Types Overview
| Type | Features | Difficulty | Suitable For |
|---|---|---|---|
| Freestanding wardrobe | Complete piece of furniture with its own sides, bottom, and top | Medium | Any room, movable |
| Built-in wardrobe | Shelves and rod in an existing alcove or between two walls | Easy | Alcoves, sloped walls, bedrooms |
| Wall closet (semi-built-in) | Closet against the wall with its own sides, but no back panel | Medium | Bedrooms, hallways |
| Walk-in closet | An entire room fitted out as a wardrobe with open shelving | Medium-hard | Large bedrooms, separate room |
For your first project, a built-in wardrobe is the most suitable. You need less material (the walls are your side panels) and the construction is simpler. A freestanding wardrobe requires more precision because the piece of furniture must stand on its own without wobbling.
Standard Dimensions
Follow these guidelines when designing:
| Component | Recommended Size | Why |
|---|---|---|
| Closet depth | 58 – 62 cm | Hangers are ~45 cm wide, plus room for the door |
| Closet height | 200 – 250 cm | Standard room height, to the ceiling for maximum storage |
| Closet width | 100 – 300 cm | Depending on available space |
| Long hanging section | 140 – 170 cm tall | For coats, dresses, long clothing |
| Short hanging section | 90 – 110 cm tall | For shirts, blouses, pants on hangers |
| Shelf spacing | 30 – 40 cm between shelves | For stacked clothing |
| Drawer height | 15 – 25 cm per drawer | For underwear, socks, accessories |
| Plinth height | 8 – 10 cm | Prevents moisture damage, easier to clean |
Tip: always measure the height of your longest garment (coat, dress) and add 5 cm. That’s the minimum height for your long hanging section.
Planning the Layout: What Goes Where?
A good layout determines whether your wardrobe is pleasant to use. Plan this on paper or with a simple sketch beforehand.
The Ideal Layout Per Person
For a 120 cm wide wardrobe (2 people) or 180 cm wide (2 people, spacious), this division works well:
| Zone | Width | Height | Contents |
|---|---|---|---|
| Long hanging | 50 – 60 cm | 140 – 170 cm | Coats, dresses, long pants |
| Short hanging | 50 – 60 cm | 90 – 110 cm | Shirts, blouses, short jackets |
| Shelves | 40 – 60 cm | 4-5 shelves of 30-40 cm | Sweaters, T-shirts, jeans |
| Drawers | 40 – 60 cm | 2-3 drawers of 15-20 cm | Underwear, socks, accessories |
| Top shelf | Full width | 30 – 40 cm (above hanging) | Seasonal clothing, boxes, bags |
Handy Additions
- Pants rack: a pull-out rack where you hang 8-10 pants side by side. Costs €15-€30 and saves a lot of space.
- Pull-out mirror: mount a swivel mirror on the inside of the door. Costs around €20.
- Shoe rack: an angled shelf at the bottom of the closet. Place under the short hanging section.
- Lighting: a simple LED strip (€10-€15) with a sensor makes your wardrobe instantly more organized, especially for built-in closets.
- Pull-out baskets: wire baskets on slides work well for sportswear or laundry. From €12 each.
Comparing Materials: MDF, Plywood, or Solid Wood?
The material choice determines the appearance, strength, and price of your wardrobe. Below are the three most commonly used options.
Sheet Material Comparison
| Material | Price per sheet (244×122 cm, 18 mm) | Strength | Look | Workability | Suitable For |
|---|---|---|---|---|---|
| MDF (laminated) | €35 – €60 | Good | Sleek, modern, no grain visible | Easy to cut, finish edges with ABS tape | Built-in closets, sleek wardrobes |
| Birch plywood | €55 – €90 | Very good | Beautiful layer structure on edges | Easy to cut, edges can be left exposed | Visible closets, modern-industrial |
| Okoume plywood | €45 – €70 | Good | Warm, light tone | Easy to work, lighter than birch | Wardrobes to be painted or lacquered |
| Solid pine | €6 – €12 per linear meter | Medium | Calm, rustic | Easy, but moves with moisture | Freestanding wardrobes, rustic style |
| Solid oak | €15 – €30 per linear meter | Excellent | Luxurious, beautiful grain | Harder to work, hardwood | High-end furniture |
Which Material for Which Wardrobe Type?
| Wardrobe Type | Recommended Material | Why |
|---|---|---|
| Built-in (sleek) | Laminated MDF (18 mm) | Affordable, sleek look, easy to customize |
| Built-in (visible edges) | Birch plywood (18 mm) | Beautiful edges, doesn’t need finishing |
| Freestanding wardrobe | Birch plywood or solid wood | Sturdier, better appearance as furniture |
| Walk-in closet | MDF or plywood | Large surface area needed, price is a factor |
Recommendation for beginners: choose laminated MDF (18 mm) in white or anthracite. It’s the cheapest, easiest to work with, and gives a sleek result. The hardware store will cut it to size, so you only need a drill for assembly.
Note about MDF: the edges are porous and unattractive. Finish them with self-adhesive ABS edge banding (€5-€10 per roll). Press the banding on with an iron and trim the excess with a utility knife.
Required Materials and Tools
Materials List for Freestanding Wardrobe (120 x 200 x 60 cm, MDF 18 mm)
Sheet material:
– 2x side panel: 200 x 58 cm
– 1x top panel: 120 x 60 cm
– 1x bottom panel: 116.4 x 58 cm (between the side panels)
– 1x divider: 96 x 58 cm (to separate hanging and shelf sections)
– 4x shelf: 58 x 58 cm (in the shelf section)
– 1x plinth: 120 x 10 cm
– 1x back panel: 120 x 200 cm (3 mm hardboard or thin MDF)
Fasteners and hardware:
– Wood screws 4 x 50 mm (approx. 40 pcs)
– Wood screws 3.5 x 16 mm (approx. 30 pcs, for back panel)
– Dowel pins 8 mm (approx. 20 pcs)
– Shelf pins (16 pcs, 4 per shelf)
– Wood glue D3
– ABS edge banding in matching color (approx. 12 meters)
– Hinges (4 pcs, 2 per door) — 110-degree cup hinges recommended
– Door knobs or grip profiles (2 pcs)
Clothes rod:
– 1x round rod 25 mm diameter, length 58 cm
– 2x rod supports
Finishing:
– Sandpaper 120 and 180 grit
– Paint or lacquer if using unlaminated MDF
Required Tools
| Tool | Essential? | Alternative |
|---|---|---|
| Cordless drill with bit set | Yes | – |
| Circular saw or jigsaw | Yes, for small adjustments | Have everything cut to size at the store |
| Spirit level | Yes | – |
| Tape measure (min. 3 meters) | Yes | – |
| Square | Yes | – |
| Pencil | Yes | – |
| Sanding block or sander | Recommended | – |
| Clamps (min. 4) | Recommended | Have someone help hold pieces |
| Iron | Yes, for ABS edge banding | – |
| Utility knife | Yes | – |
| Phillips screwdriver | Handy as backup | – |
Tip: have all your sheet material cut to size at the hardware store. Most stores charge around €0.50 per cut and cut to the millimeter. That saves you a circular saw and gives a straighter result.
Step-by-Step: Building a Wardrobe in 10 Steps
Step 1: Design and Measurements
Measure the available space carefully. Measure the width at three heights (floor, middle, ceiling) and the height at three widths. Walls are almost never 100% straight, so use the smallest measurement as your starting point.
Make a sketch with:
– Outer dimensions (width x height x depth)
– Position of the divider
– Number and position of shelves
– Height of the hanging section (long and/or short)
– Position of the clothes rod
Common mistake: making the depth too narrow. Hangers with clothing take up 50-55 cm. Add 5-8 cm for the doors. A closet depth of at least 58 cm is the safe choice.
Step 2: Buy Materials and Have Them Cut to Size
Go to the hardware store with your cut list. Check before purchasing:
– Are the sheets straight and undamaged?
– Is the thickness correct (18 mm)?
– Is the laminate color identical across sheets (check the batch number)?
Have all pieces cut to size and number each piece with a pencil (S1 = side panel 1, B = bottom, etc.). This prevents confusion during assembly.
Tip: With professional building plans, you save time and materials. At fredsdiyplans.com you’ll find plans for wardrobes in various sizes, including cut lists and step-by-step instructions.
Step 3: Finish the Edges (MDF)
Apply the ABS edge banding to all visible edges before assembly. Place the banding on the edge, run an iron on medium heat over it, and press firmly with a block of wood. Trim the excess with a utility knife and lightly sand the transition with 180 grit.
Finish at a minimum:
– Front edges of the side panels
– Front edges of the shelves
– Front edge of the top panel
– All visible edges of the divider
Step 4: Prepare Drill Holes and Dowels
Drill the holes for the dowel pins that connect the bottom and divider to the side panels. Use an 8 mm wood drill bit and drill a maximum of 30 mm deep. Use a depth stop or wrap tape around your drill bit at 30 mm as a marker.
Use 2-3 dowel pins per connection. Apply wood glue in the holes, push the dowels in, and dry-fit first (without glue) to check that everything fits.
Step 5: Mount Bottom and Divider
Lay a side panel flat on the floor (on a blanket or cardboard to prevent scratches). Mount the bottom perpendicular to the side panel with dowels and wood glue. Reinforce the connection with 2-3 screws from the outside of the side panel, into the end grain of the bottom.
Mount the divider to the bottom in the same way. Check with a square that everything is at right angles.
Step 6: Place Second Side Panel and Top
Apply glue to the dowels of the bottom and divider, and place the second side panel. Clamp everything and check squareness. Then mount the top panel in the same way.
Important: work with two people on this step. You need someone to hold the structure stable while you screw and clamp.
Step 7: Attach the Back Panel
The back panel (3 mm hardboard) gives the wardrobe its rigidity. Without a back panel, the wardrobe wobbles. Lay the wardrobe flat, check that the corners are square by measuring the diagonals (they must be equal), and screw the back panel on with 3.5 x 16 mm screws, every 15-20 cm along the edges and on the divider.
Step 8: Install Shelf Pins and Shelves
Drill 5 mm holes for the shelf pins. Use a jig or measure carefully: place the holes at equal heights on both side panels (or side panel and divider). A trick: make a jig from a strip with holes at fixed intervals (32 mm system). This ensures all holes are at the same height.
Push the shelf pins into the holes and place the shelves. Shelves don’t need to be screwed down; they sit loose on the pins so you can move them later.
Step 9: Mount the Clothes Rod
Mount the rod supports 5 cm from the back panel at the desired height. Screw them in with 4 x 30 mm screws. Place the rod and check that it’s level.
Load capacity: a steel rod of 25 mm diameter easily holds 30-40 kg of clothing over a span of 60 cm. For a wider wardrobe (more than 90 cm), add an extra support in the middle to prevent sagging.
Step 10: Mount the Doors
Use 110-degree cup hinges (also called European hinges or concealed hinges). These hinges are adjustable in three directions, allowing you to always align the doors neatly.
Drill a 35 mm hole with a Forstner bit on the inside of the door, 22 mm from the edge. Mount the hinge in the hole and screw the mounting plate to the side panel. Adjust the door so it runs evenly and closes properly.
You need 2 hinges per door. For doors taller than 180 cm, use 3 hinges for extra stability.
Door Options: Hinged, Sliding, or Open
The choice of door type affects cost, required space, and appearance.
Door Options Comparison
| Door Type | Cost (per door) | Space Needed | Difficulty | Look |
|---|---|---|---|---|
| Hinged door | €20 – €50 (hardware) | Swing room in front of closet | Medium | Classic, neat |
| Sliding door | €80 – €200 (rails + hardware) | No extra space needed | Medium-hard | Modern, space-saving |
| Open (no door) | €0 | None | Easy | Airy, everything visible |
| Curtain | €10 – €30 | Minimal | Easy | Casual, budget option |
Hinged door is the standard choice. Affordable, easy to mount with cup hinges, and you always have full access to the closet contents.
Sliding door is ideal when you have limited space in front of the closet. The door slides along the closet instead of swinging open. Downside: you can only open half the closet at a time. The rail system costs more and installation is more precise.
Open wardrobe without doors works well if you keep your clothing neatly folded and make it a decorative element. Downside: dust on your clothing and it looks messy if you don’t keep it tidy.
Making Sliding Doors Yourself
A sliding door system consists of a top rail, a bottom rail (or bottom guide), and two door panels. You buy a ready-made rail system (from €80 for two doors) and make the panels yourself from MDF or plywood. Pay attention to:
- Each door panel must be at least 3 cm wider than half the closet opening (for overlap)
- Use 18 mm thick material for rigidity
- Mount the top rail level at the top of the closet
- The bottom guide prevents the doors from swinging back and forth
Building a Built-In Wardrobe: The Budget Champion
A built-in wardrobe is the cheapest and easiest option if you have a suitable alcove. You use the walls, floor, and possibly the ceiling as structure and only install the interior.
What You Need
- Shelves (MDF or plywood, 18 mm)
- Shelf supports (metal strips with hooks, or individual shelf pins)
- Clothes rod + supports
- Screws and wall plugs
- Optional: doors or sliding doors
Assembly in 5 Steps
- Measure: measure the alcove at multiple points (width top, middle, bottom; depth left, middle, right). Use the smallest measurement.
- Mount strips: screw vertical metal strips (shelf support system) to the walls at equal intervals. Use a spirit level.
- Place shelves: hook the shelf supports into the strips and place the shelves on them. Cut the shelves 2-3 mm shorter than the alcove width for installation clearance.
- Mount clothes rod: screw the rod supports into the walls of the alcove.
- Mount doors: optionally install sliding doors or curtains.
Cost of built-in wardrobe (alcove 180 x 250 cm): €200-€400 in materials. That’s a fraction of the €2,000-€4,000 a furniture maker would charge.
Common Mistakes When Building a Wardrobe
Avoid these blunders that beginners often make:
1. Not Using a Back Panel
The back panel isn’t decorative — it keeps the wardrobe square and stable. Without a back panel, your wardrobe will start leaning after a few months. Always mount a thin panel (3-6 mm) as a back.
2. Using Shelves That Are Too Thin
A shelf of 16 mm MDF spanning 80 cm will sag under a stack of sweaters. Use at least 18 mm material, and for spans over 60 cm, use 22 mm or add an extra support in the middle.
3. Hanging the Clothes Rod Too High
You need to reach it daily. Hang the rod at maximum 190 cm height. Higher? Then you’ll need a step stool every day. Not practical.
4. No Plinth or Base
Without a plinth, dust and dirt rolls under the wardrobe and cleaning becomes impossible. A plinth of 8-10 cm tall solves that and gives the wardrobe a finished look.
5. Screwing Everything in Place Instead of Making It Adjustable
Use shelf pins instead of permanent screws for your shelves. Your clothing and needs will change. Adjustable shelves save you a lot of hassle in the future.
6. Not Checking Whether the Floor Is Level
If the floor isn’t level, your wardrobe stands crooked and the doors won’t close properly. Use shims or adjustable feet to level the wardrobe before mounting the interior.
7. Too Little Ventilation
A completely sealed wardrobe with no air circulation can develop a musty smell or even mold, especially against an exterior wall. Leave 5 cm of space between the wardrobe’s back and the exterior wall, or drill a few ventilation holes in the back panel.
Frequently Asked Questions
What material is best for a wardrobe?
For most DIYers, laminated MDF (18 mm) is the best choice. It’s affordable (€35-€60 per sheet), easy to work with, and gives a sleek appearance. Want visible edges without edge tape? Choose birch plywood. The visible layer structure on the edges gives a modern-industrial look. Solid wood is the most beautiful but also the most expensive and hardest to work with.
How deep should a wardrobe be?
At least 58 cm. Hangers with clothing take up 50-55 cm. You need an additional 5-8 cm so the clothing doesn’t press against the door. With sliding doors, you need another 2-3 cm for the rail construction, so plan for 60-62 cm depth.
Can I build a wardrobe without experience?
Yes, especially a built-in wardrobe is a great beginner project. You only need to have shelves cut to size and screw shelf supports into the wall. A freestanding wardrobe with doors is a step harder, but with the step-by-step plan in this article and materials cut to size at the hardware store, most DIY enthusiasts can manage it in a weekend.
How much does it cost to have a wardrobe custom-made?
A furniture maker charges between €1,500 and €4,000 for a custom wardrobe, depending on dimensions, material, and layout. On top of that come possible costs for removing an old closet and finishing the wall. Building it yourself costs €200-€800 in materials.
How do I prevent my DIY wardrobe from looking amateurish?
Three things make the difference: (1) have all your material cut to size at the hardware store for straight cuts, (2) finish all visible edges with ABS edge banding or choose plywood with attractive exposed edges, and (3) use cup hinges instead of surface-mount hinges — they’re adjustable and give a professional result.
What tools do I need at minimum?
A cordless drill, a spirit level, a tape measure, and a square. That’s the minimum. If you have all your material cut to size at the hardware store, you don’t need a saw. A sander is nice but not strictly necessary if you use laminated MDF.
Want to learn more about DIY and home improvement? Check out the building plans and guides at fredsdiyplans.com — more than 10,000 DIYers have gone before you.
