Building a scaffolding wood fence yourself costs around $12 to $30 per linear foot in materials, depending on the type of scaffolding wood and the height. Having a ready-made fence installed runs $45 to $90 per foot including labor. Doing it yourself saves you 40-50%, and you get to decide the exact style, height, and finish. In this article you’ll find everything: the difference between new and reclaimed scaffolding wood, horizontal vs vertical installation, a complete step-by-step guide, and how to protect the wood so it looks great for years.

New vs Reclaimed Scaffolding Wood: Which Type to Choose?

Not all scaffolding wood is the same. The choice between new, reclaimed, and treated scaffolding wood determines the look, lifespan, and price of your fence.

Type of Scaffolding Wood Appearance Lifespan (outdoor) Price per Plank (approx. 1.25 x 8 x 100 in / 32x200x2500 mm) Suitable for Fence?
New untreated Light yellow, fresh, clean look 8-12 years (if treated) $8 – $14 Yes, treatment is essential
New sanded Smooth, light yellow, no splinters 8-12 years (if treated) $10 – $16 Yes, ideal for a sleek fence
Reclaimed (1x used) Gray-brown, weathered, rugged 5-8 years $6 – $10 Yes, but select for quality
Reclaimed (2x+ used) Dark gray, rough, lots of character 3-5 years $4 – $8 Limited, often too deteriorated
Pressure-treated scaffolding wood Greenish (new), weathers to gray quickly 12-18 years $12 – $18 Yes, longest lifespan

What to Look for in Reclaimed Scaffolding Wood

Reclaimed scaffolding wood has character, but not every plank is suitable for a fence. Check these points:

  1. Cracks and splits. Surface cracks are normal. Through-cracks that run the entire length make the plank too weak.
  2. Rot and mold. Press your fingernail into the wood. If it goes in easily, the wood is rotten. Don’t use it.
  3. Warping. Lay the plank on a flat surface. More than 3/8 inch (1 cm) of bow along the length? You’ll have problems during installation.
  4. Nail holes. Old nail holes are no problem, as long as they’re not where you plan to screw.
  5. Thickness variations. Reclaimed scaffolding wood varies in thickness (1-1.25 in / 25-32 mm). Sort your planks before you start, so you use equal thicknesses per section.

Recommendation: for a fence that needs to last more than 8 years, choose new sanded or pressure-treated scaffolding wood. Reclaimed scaffolding wood is cheaper and more atmospheric, but needs replacing sooner.

Horizontal or Vertical: What Suits You?

The direction of the planks determines not just the look but also the construction and lifespan.

Aspect Horizontal Planks Vertical Planks
Look Modern, sleek, wide effect Classic, tall effect
Construction Planks on vertical posts Planks on horizontal rails
Water drainage Good — water runs right off Moderate — water sits on end grain
Lifespan Slightly longer (better water drainage) Slightly shorter (end grain absorbs water)
Climbability Easy to climb over (horizontal grip) Harder to climb over
Difficulty level Beginner Beginner-intermediate

Horizontal (Most Popular)

Horizontal scaffolding wood fences are by far the most popular choice. The planks are screwed directly onto the posts, making construction straightforward. You don’t need intermediate rails. The result is a sleek, modern look that works well with both new and existing gardens.

Drawback: horizontal planks provide footholds for children or intruders who want to climb over. If your fence faces an alley or public area, consider vertical.

Vertical

With vertical installation, you first mount 2-3 horizontal rails between the posts, then screw the planks on vertically. This requires a bit more work but gives a more classic appearance.

Tip for vertical: cut the top of each plank at an angle (5-10 degrees). Otherwise, water pools on the end grain and soaks into the wood. That’s the fastest way to get wood rot.

Materials List Per 6.5 Feet of Fence (6 ft / 180 cm High, Horizontal)

Materials

Material Quantity Approx. Price
Posts (hardwood or pressure-treated, 3×3 in / 7×7 cm, 8 ft / 240 cm) 2 pieces $14 – $30
Scaffolding planks (1.25 x 8 x 80 in / 32x200x2000 mm) 9 planks $54 – $126
Stainless steel wood screws (#10 x 2 in / 5×50 mm) 36 pieces $6 – $10
Quick-set concrete (55 lb / 25 kg) 2 bags $10 – $14
Gravel (for drainage in post hole) 2.5 gallons / 10 liters $3 – $5

Total per 6.5 feet (2 meters): $87 – $185

Total per linear foot: approximately $12 – $30 (depending on wood type)

Tools

Costs: DIY vs Having It Installed

Fence (33 ft / 10 m, 6 ft / 180 cm high) DIY Professional Install Savings
New scaffolding wood (untreated) $250 – $400 $550 – $800 $200 – $400
New scaffolding wood (sanded) $300 – $480 $600 – $900 $200 – $420
Reclaimed scaffolding wood $180 – $300 $450 – $700 $200 – $400
Pressure-treated scaffolding wood $350 – $550 $700 – $1,000 $250 – $450

Prices include posts, concrete, and fasteners. Not included: ground work and removing an old fence.

Comparison with other fence types (33 ft / 10 m, 6 ft / 180 cm):

Fence Type Material Cost Lifespan
Scaffolding wood fence $180 – $550 8-18 years
Fence panels (pressure-treated softwood) $150 – $350 10-15 years
Hardwood fence $400 – $800 20-30 years
Concrete fence $500 – $1,200 30-50 years
Composite fence $600 – $1,400 25-30 years

Scaffolding wood sits between budget fence panels and premium hardwood in terms of price. The big advantage: the rugged, industrial look you can’t get with any other material.

Step-by-Step Guide: Installing a Scaffolding Wood Fence in 6 Steps

Step 1: Measure and Mark the Post Holes

  1. String a mason’s line along the entire path where the fence will go. This is your reference line. Everything must be aligned to it.
  2. Mark the post positions. The center-to-center distance is a maximum of 80 inches (200 cm) — the length of your scaffolding planks. With longer planks (100 in / 250 cm), you can increase the spacing, but more than 100 inches center-to-center makes the fence too flimsy.
  3. Account for corners and end posts. At a corner, use two posts side by side (or a thicker corner post of 4×4 in / 9×9 cm).

Step 2: Dig the Post Holes and Set the Posts in Concrete

  1. Dig post holes 24-28 inches deep (60-70 cm) and 12×12 inches (30×30 cm) wide. Use a post hole digger — it’s much easier than a shovel.
  2. Add 2-4 inches (5-10 cm) of gravel to the bottom of each hole. This provides drainage under the post.
  3. Place the first corner or end post in the hole. Check with a spirit level that the post is plumb in both directions (front-to-back and left-to-right).
  4. Mix the quick-set concrete according to the package instructions and pour it around the post. Fill to about 2 inches (5 cm) below ground level.
  5. Check again that the post is plumb. Quick-set concrete sets in 5-10 minutes — after that, you can’t correct anything.
  6. Set the next post. Use a straight board or a plank of the correct length as a spacer between posts. Check each post’s alignment with the mason’s line and the spirit level.
  7. Let the concrete cure for 24 hours before mounting the planks.

Common mistake: not setting posts deep enough. For a 6-foot (180 cm) fence, at least 24 inches (60 cm) must be in the ground (the one-third rule). Skip this and your fence will blow over in the first autumn storm.

Step 3: Mount the Bottom Plank

  1. Start 2-4 inches (5-10 cm) above the ground. Scaffolding wood that touches the ground will rot within 2-3 years. That 2-4 inches of air underneath is the difference between a 5-year and a 15-year lifespan.
  2. Set the first plank level against the posts. Use clamps to temporarily hold the plank in place while you check.
  3. Pre-drill with a 5/32 inch (4 mm) bit everywhere you’ll place a screw. Scaffolding wood splits if you screw directly, especially near the edges.
  4. Screw the plank in place with 2 stainless steel screws per post. Use #10 x 2 in (5×50 mm) or #10 x 2.5 in (5×60 mm) screws. Screw at least 3/4 inch (2 cm) from the edge to prevent splitting.

Step 4: Work Your Way Up and Screw All Planks in Place

  1. Use spacers between the planks. A strip of 3/16 to 5/16 inch (5-8 mm) thick wood gives a nice, even gap. Or work without a gap for a solid fence.
  2. Check every 3-4 planks with a spirit level. Small deviations add up — after 9 planks, the top one can be off by inches.
  3. Alternate the screw positions per plank: one time left-right on the post, next time right-left. This prevents all screws from sitting in a line, which can split the post.
  4. The top plank: cut this to size if the total height doesn’t work out exactly.

Step 5: Top Finishing

  1. Mount a cap rail (a plank laid flat on top of the fence). This protects the end grain of the posts and the top plank from rain. Use a plank at least 6 inches (15 cm) wide that overhangs 1 inch (2-3 cm) on each side.
  2. Cut the posts to equal height if they stick up above the fence — unless you want the industrial look.
  3. Optional: mount post caps (stainless steel or wood) on top of the posts. Costs $3-$5 each and extends the life of the posts by years.

Step 6: Treat the Wood

This is optional but highly recommended. Untreated scaffolding wood weathers to a silver-gray within 6-12 months. Beautiful if that’s what you want, but the wood is then not protected against moisture.

Three treatment options:

Treatment Effect Treatment Lifespan Cost (33 ft / 10 m fence) Maintenance
Opaque wood stain Color of choice, wood grain less visible 3-5 years $30 – $50 Reapply every 3-5 years
Transparent wood oil Enhances natural color, grain remains visible 1-2 years $20 – $35 Touch up annually
Gray wash / white wash Weathered or white look, semi-transparent 2-4 years $25 – $45 Reapply every 2-4 years

How to apply:
1. Sand the wood lightly with 120-grit sandpaper (only for new scaffolding wood).
2. Apply the first coat with a wide brush or roller. Work in the direction of the grain.
3. Let dry for 4-6 hours.
4. Apply a second coat.
5. Let dry completely for 24 hours before it gets wet.

Important: treat the scaffolding wood in dry weather at temperatures above 50 deg F (10 deg C). Also treat the back side of the planks — it’s just as vulnerable as the front.

Common Mistakes When Building a Scaffolding Wood Fence

Mistake Consequence Solution
Planks touching the ground Wood rot within 2-3 years At least 2 inches (5 cm) above ground
Posts not deep enough (< 24 in / 60 cm) Fence blows over in a storm 1/3 of total post height in the ground
Not pre-drilling Scaffolding wood splits Always pre-drill with 5/32 in (4 mm) bit
No stainless steel screws Rust streaks on the wood, screws break Always use stainless steel or coated screws
No spacers used Uneven gaps, sloppy result Use a 3/16-5/16 in (5-8 mm) strip as a spacer
Posts not set plumb Crooked fence, planks don’t fit Check spirit level in two directions
Only treating the front side Back side rots faster Always treat both sides

Rules and Regulations

Before you start, check the local rules. Putting up a fence without following regulations can cause problems with your local authority or neighbors.

Height

In most areas, fences up to 6 feet (1.8 m) high are allowed without a permit in backyards. Front yard fences are typically limited to 3-4 feet (0.9-1.2 m). Check your local zoning ordinances, as rules vary by municipality.

Good Neighbor Practice

Tips to Avoid Problems

  1. Always discuss with your neighbors before starting. Good fences make good neighbors — but only if you communicate first.
  2. Check local building codes and HOA rules if applicable. Some neighborhoods have strict requirements for fence materials and appearance.
  3. Get a property survey if there’s uncertainty about the exact boundary line. It costs $400-$600 but prevents years of conflict.

Maintenance and Lifespan

How Long Does a Scaffolding Wood Fence Last?

Type of Scaffolding Wood Lifespan Untreated Lifespan Treated
New untreated 5-8 years 8-12 years
New sanded 5-8 years 8-12 years
Reclaimed scaffolding wood 3-5 years 5-8 years
Pressure-treated scaffolding wood 12-15 years 15-18 years

Annual Maintenance

  1. Inspect the fence in spring. Check for loose planks, rotten spots, and leaning posts.
  2. Remove green algae with a brush and mild soap. No pressure washer — it blasts open the wood fibers and accelerates weathering.
  3. Restain or oil when the treatment starts wearing off (water soaks into the wood instead of beading off).
  4. Replace individual planks that have rotted. That’s the advantage of a scaffolding wood fence: you replace only the bad planks, not the whole panel.
  5. Check the posts for stability. Push firmly against the top. Does the post move? The base may be rotted or the concrete may have come loose.

Frequently Asked Questions About Scaffolding Wood Fences

What does a scaffolding wood fence cost per foot?

DIY costs $12 to $30 per linear foot in materials, depending on the type of scaffolding wood and the height. For a complete fence of 33 feet (10 m) at 6 feet (180 cm) high, you’ll pay $180 to $550 including posts, concrete, and screws. Having it professionally installed costs $45 to $90 per foot.

Is scaffolding wood suitable for a fence?

Yes, provided you choose the right type and treat it. New or pressure-treated scaffolding wood is perfectly fine for outdoor use. Reclaimed scaffolding wood also works, but select for quality and expect a shorter lifespan. Always treat the wood with stain or oil if you want it to last more than 5 years.

Do I need to treat scaffolding wood for a fence?

It’s not required, but it’s strongly recommended. Untreated scaffolding wood weathers and lasts 5-8 years. Treated scaffolding wood (with stain or oil) lasts 8-12 years. Pressure-treated scaffolding wood is the exception: it doesn’t need treating and lasts 12-15 years.

Horizontal or vertical: which is better?

Horizontal is more popular, easier to build, and has slightly better water drainage. Vertical gives a more classic look and is harder to climb. In terms of lifespan there’s little difference, as long as you angle-cut the tops of vertical planks so water runs off.

How deep should the posts go in the ground?

At least 24 inches (60 cm) for a 6-foot (180 cm) fence. The rule of thumb is one-third of the total post height. For a fence of 6.5 feet (200 cm), set the posts 26-28 inches (65-70 cm) deep. Always use concrete around the posts — a post that’s just packed into the ground will blow over in the first storm.

Do I need a permit for a scaffolding wood fence?

In most areas, backyard fences up to 6 feet (1.8 m) don’t require a permit. Front yard fences are usually limited to 3-4 feet (0.9-1.2 m) without a permit. Always check your local building codes and HOA rules — there may be exceptions in your area.


Want to learn more about DIY and home improvement? Check out the building plans and guides at fredsdiyplans.com — more than 10,000 DIYers have gone before you.

Leave a Reply

Your email address will not be published. Required fields are marked *