Do you own a listed building in the Netherlands and want to sell or let it? From 29 May 2026, you will need an energy label. This is new. Until now, listed buildings (monumenten) were fully exempt from the energy label requirement. With the implementation of the revised European Energy Performance of Buildings Directive (EPBD IV), that exemption is largely removed.

It does not only affect national listed buildings (rijksmonumenten). Provincial and municipal listed buildings also fall under the new rules. That amounts to an estimated 120,000 buildings across the Netherlands.

Important to know: as a listed building owner, you do not have to meet energy performance requirements. You do not have to insulate or upgrade your property to a particular label. But you are obliged to apply for the label and present it when selling or letting. The label records the energy performance of your property, without obliging you to change anything.

In this article, you can read exactly what changes, what it costs, how the energy label for listed buildings works and how best to prepare.

What exactly changes on 29 May 2026?

On 29 May 2026, the Dutch implementation of EPBD IV comes into force. EPBD stands for Energy Performance of Buildings Directive, the European directive that obliges member states to make buildings more energy efficient. The fourth version (EPBD IV) was adopted by the European Parliament in 2024.

The key change for listed building owners: the full exemption from the energy label requirement disappears.

Until 29 May 2026:
– Listed buildings are exempt from the energy label requirement when selling and letting.
– There is no obligation to obtain an energy label.

From 29 May 2026:
– Listed buildings must have a valid energy label when sold or let.
– The exemption from energy performance requirements remains in place. You do not have to renovate to achieve a particular label.

In practical terms, this means: the label is informational, not prescriptive. It tells the buyer or tenant how energy efficient the property is, but you are not obliged to improve it.

Which listed buildings fall under the new rule?

The label requirement applies to all officially protected heritage buildings in the Netherlands. There are three categories:

National listed buildings (rijksmonumenten) — approximately 63,000 buildings, designated by the national government and registered in the National Heritage Register. Think of canal houses, churches, farmhouses, country estates and industrial heritage.

Provincial listed buildings — designated by the province. The number varies considerably by province. Not all provinces maintain their own heritage list.

Municipal listed buildings (gemeentelijke monumenten) — designated by the municipality. This is the largest group: an estimated 50,000 to 60,000 buildings. Often characterful properties in town centres, historic farmhouses or distinctive homes from the 19th and early 20th century.

Protected townscapes and village views are not listed buildings in themselves. A property in a protected townscape is not automatically a listed building. The label requirement only applies if the property has been separately designated as a municipal or national listed building.

Unsure whether your property is a listed building? Check the National Heritage Register at monumenten.nl or contact your municipality.

Label requirement vs. performance requirements: the difference

This is where much confusion arises. There are two separate obligations regulated by EPBD IV:

Obligation What it entails Applies to listed buildings?
Energy label requirement You must have a valid label when selling or letting Yes, from 29 May 2026
Energy performance requirements You must meet a minimum energy label (e.g. label C by 2030) No, listed buildings remain exempt

Listed buildings therefore receive a label but are not obliged to improve it. The European directive recognises that listed buildings have a special status. Interventions that damage the character of a heritage building (external wall insulation, HR++ glazing in historic window frames, solar panels on a protected roof) are often not permitted or desirable.

The label shows where the property stands. What you do with it is up to you — within the limits of the heritage permit.

What does an energy label for a listed building cost?

The costs for an energy label on a listed building are higher than for a standard home. This is because the assessment is more complex. Listed buildings often have unusual construction methods, unknown insulation values and non-standard systems.

Property type Energy label cost (indicative)
Standard home (not listed) 100 – 350 euros
Municipal listed building 250 – 500 euros
National listed building (residential) 300 – 600 euros
National listed building (commercial/large property) 500 – 1,500+ euros

The assessment is carried out by a certified EP advisor (energy performance advisor). They visit the property, inspect it and register the label in EP-online, the national database.

Note: not every EP advisor has experience with listed buildings. The construction peculiarities of a heritage building (thick walls of brick or natural stone, single glazing in original window frames, unknown cavity constructions) require specialist knowledge. When engaging an advisor, always ask about their experience with listed buildings.

The validity of an energy label is 10 years. After 10 years, you must have a new label produced.

How does the energy label assessment work for a listed building?

The assessment for a listed building broadly follows the same process as for a standard home, but with some important differences.

Step 1: Preparation
Gather as much information about your property as possible. Think of building plans, previously carried out renovations, the type of heating system and any insulation measures. The more you can provide, the more accurate the label.

Step 2: The assessment
A certified EP advisor visits and inspects the property. They look at the building envelope (walls, roof, floor, windows), the systems (heating, ventilation, hot water) and the usable floor area. With listed buildings, establishing insulation values is often more difficult, because you cannot simply drill a hole in a historic wall.

Step 3: Calculation and registration
The advisor calculates the energy performance based on the NTA 8800 methodology (the Dutch standard) and registers the label in EP-online. You receive an official energy label with a letter from A++++ to G.

Step 4: Receipt
The registered label can be downloaded from EP-online or you receive it via the advisor. This label is mandatory as part of the sale or rental agreement.

The turnaround time from application to registration is typically 1 to 3 weeks. During busy periods (around the 29 May 2026 start date, demand is expected to surge), this may take longer.

What label do most listed buildings receive?

Most listed buildings end up with a label E, F or G. That is logical. Listed buildings were often built before 1920, with solid masonry walls, single glazing and limited or no insulation.

That is not a problem. The label is informational. A listed building with label G can be sold and let without any issue. There is no minimum requirement.

Some listed building owners have, over the years, taken sustainability measures that fit within the heritage rules:

For a listed building that has already been partially made more sustainable, a label D or even C is achievable.

Heritage glazing fitted in a historic window frame of a national listed building

What if you do not have an energy label in time?

Enforcement of the energy label requirement lies with the Inspectie Leefomgeving en Transport (ILT), the Dutch Human Environment and Transport Inspectorate. If you sell or let without a valid energy label, you risk a fine.

Current fine amounts for missing an energy label:

Situation Fine (indicative)
Selling a home without energy label 170 – 340 euros
Letting a home without energy label 170 – 340 euros
Selling a commercial building without energy label 405 – 810 euros

These amounts are based on current enforcement practice. It is possible that fine amounts will be adjusted when the new rules come into force.

Additionally, the absence of an energy label can delay a sale. Buyers and estate agents expect a valid label. Without one, the notary may refuse or delay the transfer.

Making a listed building more sustainable: what is and is not allowed?

If, after receiving your energy label, you do want to make sustainability improvements, there are options. But with a listed building, you always need to comply with the Dutch Omgevingswet (Environment and Planning Act) and often need a heritage permit.

What is usually allowed:
– Floor insulation on the underside (via the crawl space)
– Roof insulation on the inside
– Heritage glazing (special thin HR glass)
– Replacing the boiler with a hybrid heat pump
– Radiator foil behind existing radiators
– Fitting draught strips

What is often not allowed, or only with a permit:
– External wall insulation
– Replacing window frames with plastic
– Solar panels on a protected roof
– Double glazing in original window frames (unless heritage glazing)
– Cavity wall insulation on heritage facades

What you must always do: apply for an environmental permit (omgevingsvergunning) from your municipality for changes to a listed building. The heritage committee assesses whether the intervention affects the character of the building.

Grants are available via the Dutch National Restoration Fund (Nationaal Restauratiefonds) and provincial and municipal grants for listed buildings. The ISDE grant (Investment Subsidy for Sustainable Energy) also applies to listed buildings when measures are carried out professionally.

Frequently asked questions

Do I have to renovate my listed building to a specific energy label?
No. Listed buildings are exempt from energy performance requirements. You only need to have a label when selling or letting. The label is informational, not prescriptive.

Does the label requirement apply if I am not selling or letting my listed building?
No. The label requirement only applies at a transaction moment: sale or new letting. If you live in your own listed building and are not selling or letting, you do not need to obtain a label.

I already have an energy label. Do I need to get a new one?
If your current label is still valid (less than 10 years old), you do not need to apply for a new one. Check the validity on EP-online.nl.

How much time should I allow for applying for an energy label?
Allow 1 to 3 weeks from application to registration. Plan this well before your sale or letting date. Around 29 May 2026, EP advisors are expected to be very busy.

Can I get a grant for the energy label itself?
The energy label itself is usually not subsidised. However, grants are available for sustainability measures on listed buildings, such as through the National Restoration Fund, the ISDE grant and municipal schemes.

What if my listed building is a commercial property?
The label requirement also applies to non-residential buildings (offices, shops, hospitality venues). The assessment is more extensive and the costs are higher, but the exemption from performance requirements also applies.

Can I apply for the energy label myself?
No. The energy label must be produced by a certified EP advisor. You can choose an advisor yourself and schedule the assessment. Always ask about their experience with listed buildings.

Conclusion

From 29 May 2026, listed building owners in the Netherlands must have a valid energy label when selling or letting. The exemption from energy performance requirements remains in place, but the label requirement no longer has an exemption. The label is informational: it records the energy performance of your heritage building, with no obligation to renovate.

The key steps you can take now:

  1. Check whether your property is officially designated as a listed building
  2. Find an EP advisor with experience in heritage buildings
  3. Schedule the assessment well in advance of any planned sale or letting
  4. Gather construction information about your property for a more accurate assessment

Expect costs of between 250 and 600 euros for a residential listed building. Plan it in good time, as demand around the start date is expected to be high.


Check out our DIY plans at fredsdiyplans.com for more home improvement projects.

Leave a Reply

Your email address will not be published. Required fields are marked *