Every summer the same story: you’re standing in the garden daily with a hose, using hundreds of litres of water while half of it evaporates before reaching the roots. An average household uses 2,000 to 4,000 litres of water per month on the garden during summer. With a drip irrigation system you can cut that by 50 to 70%, because the water goes directly to the roots instead of being sprayed over leaves and soil. A basic drip system for a 20 m² vegetable patch costs just 30 to 80 euros to set up yourself. A fully automatic system with a timer for a 40 m² garden costs 100 to 300 euros. In this article you’ll learn which system suits your garden, what you need and how to install it step by step.

DIY vs. hiring a professional: what’s the difference?

DIY Hiring a landscaper
Material costs (40 m²) €80 – €250 €80 – €250
Labour costs Your own time (3-6 hours) €200 – €500
Irrigation controller €25 – €80 (basic) Included
Total €105 – €330 €350 – €750
Savings doing it yourself 50-65% –

For larger gardens with multiple zones, a landscaper’s costs can rise to €1,000 to €2,000. DIY installation is perfectly doable with drip irrigation because you don’t need any special skills. Most systems use push-fit connectors that click together without tools.

Drip irrigation vs. other watering systems

Not every system suits every garden. Here’s a comparison of the four most common watering methods.

Feature Drip irrigation Sprinkler (pop-up) Garden hose Watering can
Water usage Low (2-4 l/hr per dripper) High (500-1,500 l/hr) High (600-1,000 l/hr) Very low
Water savings 50-70% 0-10% 0% Maximum
Can be automated Yes Yes Limited No
Installation cost (40 m²) €80 – €250 €300 – €800 €20 – €50 €5 – €15
Maintenance Low Medium None None
Suitable for vegetable garden Excellent Fair (wet foliage) Fair Good
Suitable for lawn No Excellent Good No
Evaporation Minimal High (30-50%) High Minimal

Conclusion: Drip irrigation is the best choice for vegetable gardens, borders, hedges and planters. For lawns, a pop-up sprinkler is more suitable. Combining both systems on a timer is the most effective solution for a complete garden.

Types of drip irrigation systems

There are three main types of drip irrigation. Each type suits a different application.

Type 1: Soaker hose (porous)

A porous hose that releases water along its entire length. Water seeps evenly through the hose wall.

Type 2: Drip line with built-in drippers

A hose with drippers built in at fixed intervals (usually 30 or 50 cm). Each dripper delivers a set amount of water.

Type 3: Individual drippers on thin tubing

Thin tubes (4-6 mm) from a main line (13 mm) to individual drippers at each plant.

Type Investment (20 m²) Flexibility Maintenance Installation time
Soaker hose €15 – €40 Low Low 30 min
Drip line with drippers €25 – €60 Medium Medium 1 hour
Individual drippers €40 – €100 High Higher 2-3 hours

Popular systems compared

System Suitable for Kit contents Price (indicative)
Gardena Micro-Drip Starter Set S Balcony/small garden (15 m) Base unit, 15 m hose, 10 drippers €25 – €35
Gardena Micro-Drip Starter Set Vegetable Garden (40 m²) Vegetable/flower bed Base unit, 25 m hose, sprayers, connectors €55 – €75
Gardena Micro-Drip Starter Set Raised Bed (35 plants) Raised bed Base unit, hoses, 35 drippers €45 – €65
Gardena Smart Water Control Smart garden (app-controlled) Gateway, water controller, sensor €200 – €280
Budget soaker hose (unbranded) Simple vegetable bed 25 m soaker hose, connectors €15 – €30

Material list: drip system for a vegetable bed (20 m²)

Component Quantity Price
Pressure regulator/base unit 1 €10 – €20
Main line (13 mm) 10 metres €8 – €15
Drip line with drippers (30 cm spacing) 20 metres €16 – €40
T-connectors (13 mm) 5 pieces €5 – €10
Elbow connectors (13 mm) 4 pieces €4 – €8
End caps 4 pieces €3 – €5
Ground stakes/pipe holders 10 pieces €4 – €8
Tap connector 1 €5 – €10
Total basic €55 – €116
Irrigation controller (optional) 1 €25 – €80
Total with timer €80 – €196

Step-by-step guide: setting up drip irrigation in 10 steps

Step 1: Draw a layout plan

Sketch your garden to scale on paper. Mark where your plants are, where the outdoor tap is and what distances you need to cover. This prevents buying too much or too little material.

Step 2: Choose the system type

Select the type of drip irrigation based on your planting:
– Vegetable rows or hedges: drip line with built-in drippers
– Mixed borders: individual drippers
– Raised beds: drip line with drippers laid in a serpentine pattern

Step 3: Check the water pressure

Most drip systems work at 1 to 2 bar. A standard outdoor tap delivers 3 to 5 bar. Always use a pressure regulator (included with most starter sets) to prevent connectors from popping off or drippers delivering too much water.

Step 4: Mount the pressure regulator on the tap

Screw the tap connector onto your outdoor tap and attach the pressure regulator (base unit). With Gardena systems, you click the parts together using the Quick & Easy system, no tools needed.

Step 5: Lay the main line

The main line (13 mm) runs from the tap to your beds. Lay it along the path edge or border edge. Use ground stakes to hold the hose in place. Cut the hose to length with ordinary scissors or secateurs.

Step 6: Create branches

Use T-connectors to create branches to different beds or zones. With the Gardena system, you punch a hole in the main line with a hole maker and push the connector in.

Step 7: Lay the drip lines

Lay the drip lines in rows alongside your plants, with 30 to 50 cm between rows. The drippers should sit 5 to 10 cm from the plant stem, not right against it.

Step 8: Seal the ends

Place an end cap on each end of the drip line. This prevents all the water from running out at the end of the hose instead of at the drippers.

Step 9: Test the system

Turn on the tap and walk the entire system. Check:
– Are all connections leak-free?
– Are all drippers working?
– Is water reaching every plant?
– Is the water pressure even throughout the system?

Step 10: Connect the irrigation controller (optional)

An irrigation controller screws between the tap and the pressure regulator. Set a watering schedule:
– Vegetable bed: twice daily, 15-30 minutes (early morning and late evening)
– Borders: once daily, 20-40 minutes
– Hedges: once every 2 days, 30-60 minutes

Watering schedule by plant type

Plant type Frequency Duration per session Litres per plant/day
Tomatoes 2x daily 15 min 2-4 litres
Lettuce/herbs 1-2x daily 10-15 min 0.5-1 litre
Courgette/pumpkin 1x daily 20-30 min 3-5 litres
Strawberries 1x daily 15-20 min 1-2 litres
Hedges 1x every 2 days 30-60 min 2-4 litres per linear metre
Perennials (border) 1x every 2-3 days 20-30 min 1-3 litres
Container plants 1-2x daily 5-10 min 0.5-1.5 litres

Note: These are guidelines for dry summer days. Skip a session when it rains. A smart irrigation controller with rain sensor handles this automatically.

Water usage and savings

Method Water usage per day (40 m² vegetable garden) Cost per month (mains water)
Garden hose/watering can 150 – 300 litres €15 – €30
Sprinkler 200 – 400 litres €20 – €40
Drip irrigation 50 – 120 litres €5 – €12
Savings with drip irrigation 50 – 70% less €10 – €28 per month

Over a full season (May to September, 5 months), drip irrigation saves you €50 to €140 on water costs. The system pays for itself within 1 to 2 seasons.

Seasonal maintenance

When Action
Start of season (April) Flush the system, check connectors, test drippers
Every month Check for clogged drippers, flush the system
If limescale builds up Soak drippers in vinegar solution (1:3 vinegar-water)
End of season (October) Drain the system, store indoors or cover
Winter Store irrigation controller indoors, remove batteries

Tip: Clogged drippers are the most common complaint. Always use a filter (included with most starter sets) and flush the system monthly by briefly removing the end caps.

Common mistakes

  1. Not using a pressure regulator. The water pressure from the tap (3-5 bar) is too high for drip systems (1-2 bar). Without a pressure regulator, connectors pop off and drippers deliver too much water. Always fit a pressure regulator.

  2. Running lines that are too long without accounting for pressure loss. After 50 metres of drip line, the water pressure at the end is significantly lower than at the beginning. Split long runs into separate zones with their own connection to the main line.

  3. Leaving drip hoses exposed on the ground. UV radiation breaks down plastic. Cover the hoses with a layer of mulch (5 cm) or bark chips. This protects the hoses and reduces evaporation.

  4. Not winterising the system. Water left in the hoses that freezes expands and damages connectors and drippers. Always drain the system completely before the first frost.

  5. Placing drippers too close to the stem. This causes stem rot in sensitive plants such as tomatoes and peppers. Keep 5 to 10 cm between the dripper and the stem.

  6. Watering briefly every day instead of less often for longer. Short watering only moistens the top layer of soil. The roots then don’t grow deep, making plants more vulnerable to drought. Water every other day for longer, so the moisture penetrates deep into the soil.

Frequently asked questions

Can I use drip irrigation with rainwater?
Yes, but always use a fine filter (100-150 mesh) to prevent blockages. Rainwater often contains small particles that clog drippers. A water butt with a built-in filter is the most practical solution. Also check that your water butt is high enough for sufficient pressure (at least 1 metre of height for 0.1 bar).

How many drippers can I connect to one tap?
That depends on your tap’s flow rate. An average outdoor tap delivers 1,000 to 1,500 litres per hour. A dripper uses 2 to 4 litres per hour. So you could connect 250 to 500 drippers to one tap. In practice, 100 to 200 drippers is the maximum for even distribution.

Should I lay drip hoses above or below ground?
Above ground is simplest and makes maintenance easier. Covering with mulch protects against UV and reduces evaporation. Below ground (5-10 cm deep) is possible for permanent planting but makes it harder to find blockages.

Can I combine drip irrigation with a sprinkler for my lawn?
Yes, absolutely. Use an irrigation controller with two outlets or a manifold. Set separate watering schedules for the lawn and drip irrigation. Many irrigation controllers have 2 to 6 independent zones.

How long does a drip system last?
A good-quality system (Gardena, Rain Bird, Netafim) lasts 5 to 10 years with proper maintenance. Drip hoses are the first component that needs replacing, usually after 3 to 5 seasons. The main line, connectors and irrigation controller last longer.

Is drip irrigation suitable for a roof terrace or balcony?
Absolutely. A balcony or roof terrace is actually ideal for drip irrigation, because pots and planters dry out quickly. A starter set for a balcony (10-15 container plants) costs €25 to €50 and connects to an outdoor tap or even a water butt with sufficient height.


DIY Plans and Guides

Want to get started right away with professional building plans and step-by-step guides? Check out the complete plan package at fredsdiyplans.com – with thousands of plans for every DIY project.


👉 View all DIY plans

Leave a Reply

Your email address will not be published. Required fields are marked *