What is a beam end?
What is a beam end? A beam end is the termination point of a timber beam where it rests in or on a wall, column, or other support. It is the critical location where floor or roof loads are transferred into the load-bearing structure. The beam end is one of the most vulnerable parts of […]
What is beam floor construction?
What is beam floor construction? Beam floor construction is a traditional floor system in which wooden beams serve as the primary load-bearing elements. The beams run parallel to each other, spanning the distance between two load-bearing walls. Floorboards or sheet materials such as plywood are then fixed across the beams to create the walking surface. […]
What is a beam hanger?
What is a beam hanger? A beam hanger (also known as a joist hanger) is a metal connecting device used to support timber beams and connect them to other structural elements such as main beams, walls, or columns. It is one of the most widely used connectors in timber construction, providing a reliable, quick, and […]
What is a beam-bearing wall?
What is a beam-bearing wall? A beam-bearing wall is a load-bearing wall that serves as the direct support for floor or roof beams. It absorbs the forces from the beams and transfers them through the wall structure down to the foundation. Removing or weakening a beam-bearing wall can have serious consequences for the structural integrity […]
What is a beam bridge?
What is a beam bridge? A beam bridge is the simplest and oldest type of bridge. The construction consists of one or more horizontal beams placed across an opening, supported at each end by piers, abutments, or banks. The beams carry the traffic load directly across the span. Structural principle The working principle of a […]
What is a beam floor?
What is a beam floor? A beam floor (balkbodem) refers to the underside of a beam floor construction. It is the part visible as a ceiling from the storey below. The beam floor underside can consist of the unfinished bottom of the floor joists or be covered with boarding, plasterboard, or render. Construction and build-up […]
What is a beam anchor?
What is a beam anchor? A beam anchor is a metal fastening device used to securely connect wooden or steel beams to a wall or masonry structure. It ensures that the beam layer and the wall construction function as a cohesive unit, which is essential for the overall stability of a building. Function and principle […]
What is a baldachin?
What is a baldachin? A baldachin (also spelled baldaquin or baldachino) is a freestanding or wall-mounted overhead covering, often decorative in nature, that provides shelter or a visual focal point above an entrance, statue, altar, or throne. In architecture, the term refers to both permanent structural elements and portable fabric canopies used in ceremonies. Origin […]
What is balanced ventilation?
What is balanced ventilation? Balanced ventilation is a mechanical ventilation system in which both the supply of fresh outdoor air and the extraction of stale indoor air are controlled by fans. The system incorporates a heat recovery unit that transfers warmth from the outgoing air to the incoming fresh air, minimising energy loss. How it […]
What is balaat?
What is balaat? A balaat is a flat, uncovered platform or terrace that forms part of a building, traditionally found in Dutch architecture. The term refers to a level roof structure designed for use as outdoor living space — similar to a roof terrace, but conceived as an integral part of the original building design. […]
