What is balloon framing?
Balloon framing is a timber frame construction method where the studs run continuously from the foundation to the roofline, spanning multiple storeys. This technique was developed in the 19th century in North America. Origin and history Balloon framing originated around 1830 in the United States, when industrialisation made machine-sawn lumber and mass-produced nails widely available. […]
What is a balloon ridge?
A balloon ridge is a rounded or inflated ridge construction on top of a roof. It refers to a finishing element of the roof ridge that is wider or thicker than a standard ridge, often used as a decorative feature. Function and application The balloon ridge is placed at the ridge of the roof, the […]
What is a ballast layer?
A ballast layer is a layer of gravel, crushed stone, or other heavy material applied on a flat roof or beneath a foundation to add weight for stability or to keep the roofing membrane in place. Function and application The ballast layer serves different purposes depending on where it is used: On flat roofs, the […]
What is a beam-bearing wall?
A beam-bearing wall is an interior or exterior wall that supports the beam layer of a floor or roof. It is a load-bearing wall that must not be removed without proper structural measures. Function and application In traditional building construction, timber or steel floor beams rest on walls. The wall on which these beams bear […]
What is a balcony canopy suspension construction?
A balcony canopy suspension construction is a structural system in which a balcony or canopy is not supported by columns or brackets, but is suspended from steel tie rods or cables anchored into the structure above. Function and application In a conventional balcony or canopy, loads are transferred downward through columns or brackets. In a […]
What is a balcony?
A balcony is a cantilevered platform on the facade of a building, fitted with a balustrade or railing, that is accessible from a room. It serves as an outdoor living space. Function and application A balcony provides residents with an outdoor area without having to leave the building. It is used for sitting, growing plants, […]
What is a beam hatch?
A beam hatch is a hatch in a beam floor that allows goods or people to be transported to another storey. Beam hatches are commonly found in historic warehouses and farmhouses. Function and application A beam hatch provides access to a higher or lower floor through an opening in the floor structure. In warehouses, beam […]
What is a composite beam layer?
What is a composite beam layer? A composite beam layer is a floor or ceiling structure consisting of two tiers of beams: primary beams (main beams or binders) and secondary beams (common joists). The primary beams span the full distance between load-bearing walls, while the secondary beams rest across them at right angles and carry […]
What is a single beam layer?
What is a single beam layer? A single beam layer is a floor or ceiling structure consisting of one tier of parallel timber beams that span directly from one load-bearing wall to the other. It is the simplest and most commonly used form of timber beam floor, suitable for relatively modest spans. Construction and layout […]
What is a beam layer?
What is a beam layer? A beam layer is the complete set of parallel timber beams that forms the load-bearing structure of a floor, ceiling, or roof. The beam layer carries vertical loads — including the self-weight of the floor, furniture, and occupants — and transfers them to the supporting walls or columns below. Construction […]
