What is a Raised Panel?

A raised panel is a door or cabinet panel with a flat central field surrounded by a bevelled or chamfered edge that sits proud of the surrounding frame. Known as “briefpaneel” in Dutch and sometimes called a mirror panel, it is a classic element of traditional joinery found in interior doors, furniture, and architectural panelling. […]

What is a Bricorna?

A bricorna is a small, portable anvil used by masons, stonecutters, and other building craftsmen for shaping and dressing stone, metal fixings, and tools on site. Unlike a full-size blacksmith’s anvil, the bricorna is compact and lightweight enough to be carried to the workbench or scaffold where it is needed. Design and Features The bricorna […]

What is Rubble Masonry?

Rubble masonry is a form of masonry construction built from irregularly shaped, rough-broken pieces of natural stone. Known as “breuksteenwerk” in Dutch, it is one of the oldest building methods and remains in use today for retaining walls, landscape features, and heritage restoration. Types of Rubble Masonry Rubble masonry is classified by how the stones […]

What is Elongation at Break?

Elongation at break is the maximum percentage a material can be stretched from its original length before it fractures. Called “breukrek” in Dutch, it is a key mechanical property that indicates how flexible or brittle a material is under tensile stress. How It Is Measured Elongation at break is determined through a standardised tensile test: […]

What is Bremen Green?

Bremen green is a synthetic green pigment based on copper acetate or copper carbonate, historically used in paints, coatings, and decorative patination. Known as “Bremer groen” in Dutch, it takes its name from the German city of Bremen, where it was commercially produced from the Middle Ages onward. Composition and Properties Bremen green belongs to […]

What is Crusher Sand?

Crusher sand is manufactured sand produced by mechanically crushing natural stone, gravel, or recycled concrete into fine particles. Also called “brekerzand” in Dutch, it serves as an engineered alternative to natural river or pit sand and is widely used as a fine aggregate in construction. How Crusher Sand is Produced The manufacturing process involves several […]

What is Caulking?

Caulking is the process of making joints watertight by driving sealing material into them under pressure. Known as “breeuwen” in Dutch, this technique has been practised for centuries in shipbuilding, harbour works, and building construction wherever timber, stone, or metal joints must resist water. How Caulking Works The caulking process follows a consistent sequence: The […]

What is Caulking Material?

Caulking material is any fibrous or pliable substance driven into joints and seams to make them watertight. Historically known as “breeuw” in Dutch building tradition, these materials have been used for centuries in both shipbuilding and construction to seal gaps against water ingress. Types of Caulking Material Traditional and modern caulking materials include: Oakum — […]

What is a snap-off blade knife?

A snap-off blade knife (Dutch: breekmes) is a utility knife fitted with a segmented blade that can be snapped off section by section to expose a fresh, sharp cutting edge. It is one of the most commonly used hand tools on construction sites, in workshops, and for general-purpose cutting tasks. How a snap-off blade knife […]

What is a shear bolt?

A shear bolt (Dutch: breekbout) is a specially engineered bolt designed to fracture at a predetermined load, acting as a mechanical safety device that protects equipment or structures from overload damage. When the applied force exceeds the bolt’s rated shear strength, the bolt breaks cleanly, disconnecting the components and preventing damage to more expensive parts. […]