What is civil engineering?
Civil engineering is the branch of engineering concerned with the design, calculation and construction of infrastructure works such as bridges, tunnels, roads, locks, dikes and sewerage systems. It covers all built structures that do not fall under building construction (houses, offices, etc.). Sub-disciplines Civil engineering encompasses several specialisms: Hydraulic engineering — dikes, dams, locks, coastal […]
What is a cistern?
A cistern is an underground, watertight storage chamber for collecting and holding rainwater or other fresh water. Cisterns have been used for thousands of years in areas with limited rainfall and are gaining renewed interest today for water conservation. How it works A cistern collects rainwater via the roof: Collection — rainwater flows through gutters […]
What is circular economy in construction?
Circular economy is an economic system in which materials and products are kept in circulation for as long as possible through reuse, repair, refurbishment and recycling, instead of being discarded after use. In the construction sector this means building with materials that can be reused at the end of their service life. Why build circularly? […]
What is cimorné?
Cimorné is a type of cast stone (also called reconstructed stone) made from a mixture of cement, fine stone granulate (such as marble or granite chippings) and pigments, poured into moulds and ground or polished after curing. It was widely used as a more affordable alternative to natural stone for facade ornaments and mouldings. Properties […]
What is a cimborrio?
A cimborrio is a tower- or lantern-shaped superstructure over the crossing (intersection of the nave and transept) of a church, admitting light into the heart of the building. It is a characteristic feature of Spanish Romanesque and Gothic church architecture. Characteristics A cimborrio is distinguished by: Position — directly above the crossing Light function — […]
What is a ciborium?
A ciborium is a freestanding, column-supported canopy (baldachin) placed over an altar, font or tomb in a church. It marks a sacred place and is a common element in early Christian, Romanesque and Baroque church architecture. Characteristics A ciborium is recognisable by: Four columns — usually of marble or stone, supporting the canopy Dome or […]
What is CIAM?
CIAM (Congrès International d’Architecture Moderne) was an international organisation of modern architects that existed from 1928 to 1959 and had an enormous influence on twentieth-century urban planning and architecture. The organisation formulated the principles of functionalism and modern city planning. Background CIAM was founded in 1928 in La Sarraz, Switzerland, by Le Corbusier, Sigfried Giedion […]
What is chromating?
Chromating is a chemical surface treatment in which a thin protective layer is applied to metal (often galvanised steel or aluminium) by immersion in a chromium-based solution. This chromate layer protects against corrosion and improves paint adhesion. How does it work? During chromating the metal surface reacts with the chromium solution, forming an extremely thin […]
What is a chloride class?
A chloride class is a classification that indicates to what extent concrete is exposed to chlorides (salts), so that the correct concrete mix can be specified to prevent corrosion of the reinforcement. The classes are defined in the European standard EN 206. Why chloride classes? Chlorides (from de-icing salt and seawater) are the greatest threat […]
What is a flake floor (chip floor)?
A flake floor (also called a chip floor) is a seamless resin floor where decorative flakes (chips) are broadcast into a wet epoxy layer, creating a speckled, colourful surface. The result is a hard-wearing, easy-to-clean floor commonly used in garages, workshops and showrooms. Build-up A flake floor consists of multiple layers: Primer — bonding coat […]
