What is a continuous support?

A continuous support is a support condition in which a beam or floor does not terminate over the bearing point, but extends past it to the next span. This contrasts with a simply supported beam, which hinges at each support. A continuous support belongs to continuous structures and provides a more favourable force distribution. Difference […]

What is a dowel pin iron?

A dowel pin iron is a metal pin, rod or bar used as a dowel to invisibly connect two building elements — most often natural stone blocks. The term is used both for the material (the pin itself) and the function (the connection). Forms and types A dowel pin iron can be made in several […]

What is a dowel hole?

A dowel hole is the recess — usually a round or square drilled opening — in a stone or substrate, into which a dowel is placed to invisibly connect two elements. The dowel hole is therefore an essential part of a dowel joint in natural stone and heritage construction. Shape and dimensions The shape depends […]

What is a stone dowel?

A stone dowel is a short metal or wooden pin used to connect natural stone blocks invisibly to each other or to a substrate, without any visible joinery. Stone dowels prevent heavy elements such as cap stones, capitals or columns from sliding or tilting. How it works A stone dowel is placed in a drilled […]

What is a donk?

A donk is a natural sandy rise in a peat or river landscape, formed as a river dune or aeolian sand mound, which in dry periods stood above the surrounding wet land. Donks were attractive settlement sites in prehistoric and early medieval times because they remained dry in an otherwise marshy environment. Origin Donks generally […]

What is a donjon?

A donjon is the central, most strongly built residential and defensive tower of a medieval castle. It served as the lord’s residence, store for provisions and the last refuge during a siege. In English the equivalent is generally called a “keep”; in German “Bergfried” or “Wohnturm”. Construction features A donjon is built to withstand a […]

What is a domus?

A domus is a freestanding town house from Roman antiquity, occupied by a well-to-do family and characterised by a rectangular plan organised around one or more open courtyards. The domus stood in contrast to the insula (urban tenement) and the villa rustica (country estate), and is documented in detail thanks to finds at Pompeii and […]

What is dipping in construction?

Dipping is fully or partly immersing a building material in a liquid in order to saturate, preserve or coat it. It is an ancient technique still widely used in timber construction, metal finishing and stone restoration. Different applications Dipping is used in several ways: Timber dipping Beams, posts or laths are dipped in a bath […]

What is a construction jack?

A construction jack is a mechanical lifting tool that raises, holds or moves heavy loads with relatively little applied force. On site it is used to support beams, jack up buildings or position heavy elements. The device is also called a screw jack, hydraulic jack or simply jack. How it works A jack relies on […]

What is a dolmen?

A dolmen is a prehistoric megalithic structure of two or more upright supporting stones bearing one or more large capstones, together forming a stone chamber that usually served as a tomb. The word comes from Breton (taol = table, men = stone), meaning “stone table”. Construction A dolmen is built of rough, unworked natural stones: […]