What is fall protection?

Fall protection is a built-in safety provision that prevents people or objects from falling through an opening or from a height. Building codes set out the requirements that fall protection must meet, for example at balconies, voids, stairs and window openings. Types of fall protection Fall protection can take several forms: Balustrade or guardrail — […]

What is struck flush jointing?

Struck flush jointing is a masonry technique in which the joint is finished directly with the bedding mortar, without a separate pointing operation. While laying the bricks, the mortar that is squeezed out of the joints is immediately struck off flush, creating a smooth, sealed joint. How does it work? In struck flush jointing, the […]

What is a passthrough?

A passthrough is a short connection, passage or opening that joins two building parts or spaces. In construction, the term covers both structural penetrations (such as a service penetration through a wall) and short walkable connections between areas. Application A passthrough appears in many contexts: Building services — a hole or pipe through a wall, […]

Hydrogen heat pump: a world first from Dutch company Cooll (2026)

Hydrogen Heat Pump

Heat pumps are the answer to everything, say some. Heat pumps don’t suit every home, say others. And they’re both right. Millions of homes across the UK were built before cavity wall insulation was standard, have no underfloor heating and are simply not suited to an all-electric heat pump without major renovation work. Now there […]

What is a section drawing?

A section drawing is a drawing representing a building or building element as if cut through at a particular plane, so that its internal layout, heights and connections become visible. Sections, together with plans and elevations, form the basic drawings of any construction project. What a section shows A good section drawing communicates at least: […]

What is an overhanging stair tread?

An overhanging stair tread is a stair tread one or both ends of which project beyond the line of the string (stringer) or riser, instead of finishing flush. It is a traditional detail with both visual and functional value. Form The size of the overhang varies: One side — on open-string stairs against a wall, […]

What is door clearance?

Door clearance (also known as a margin or gap) is the small dimensional difference between the inside of a door frame and the size of the moving door leaf or window sash, needed for free movement and assembly. Without clearance, a door would jam or fail to close when the wood expands. Why it is […]

What is a through-runner?

A through-runner is a beam, joist or element that spans in one unbroken piece across two or more supports. The term is used in carpentry and masonry to describe parts that are explicitly not jointed or stopped at an intermediate support. Structural significance A through-runner behaves differently from a simply supported beam: Continuous beam — […]

What is a composite cast floor?

A composite cast floor is a concrete floor in which the structural topping layer is cast in one operation on site, usually on top of precast elements. Casting in situ creates a monolithic bond between the elements, so the floor acts as a single stiff slab. How it works Composite cast floors combine the benefits […]