What is a finery furnace?

A finery furnace (also called finnery or “finoven” in Dutch) is a traditional furnace in which pig iron from the blast furnace was refined into wrought iron. The process was used in the Middle Ages and the early Industrial Revolution to produce construction iron, tools, gates and weapons. The finery furnace disappeared around 1900 with […]

What is a Fink truss?

A Fink truss is a triangular truss whose internal members form a W shape. The system is named after the German-American engineer Albert Fink (1827–1897) and is widely used as a roof truss or bridge truss. The W configuration distributes loads efficiently across the members, enabling large spans with relatively light sections. Geometry A typical […]

What is veneer?

Veneer is a thin slice of wood, usually 0.5 to 3 mm thick, glued onto a substrate of sheet material or cheaper timber. Veneer gives an object the appearance of solid wood while the material is more stable, cheaper and more sustainable. Veneer has been used for centuries for luxury furniture, doors, panelling and interior […]

What is a Fimon stone?

A Fimon stone is a lightweight, perforated or hollow building block used for partitions and lightweight façade construction. The block stands out for its low density and good thermal properties. Because of the hollow structure it is faster and cheaper to lay than a solid brick and loads floors less. Properties The Fimon stone has […]

What is a film layer?

A film layer is the thin, continuous coating of paint, lacquer or coating that remains on a substrate after drying or curing. The film layer is the actual protective and/or decorative layer. Its thickness is usually between a few micrometres (µm) and several millimetres, depending on product and application. Function of the film layer A […]

What is filigree (filigree concrete slab)?

Filigree originally refers to an art technique in which fine metal wires are formed into an openwork pattern. In construction the term is used mainly for the filigree concrete slab (also called wide-slab or half-slab): a prefab concrete slab only a few centimetres thick, with reinforcement and a protruding lattice girder, completed on site with […]

What is the fineness modulus?

The fineness modulus (FM) is a dimensionless number expressing the average grain size of an aggregate (sand, gravel, chippings). It is calculated by adding the cumulative percentages retained on standard sieves and dividing by 100. The fineness modulus is an important parameter in the design of concrete mortar, asphalt mixes and masonry mortars. Calculation The […]

What is fine rendering (fine float finish)?

Fine rendering is a thin, smoothly rubbed finishing coat of mortar or plaster, applied over a coarser base coat. After application the coat is floated or rubbed with a felt or sponge float, releasing the surface aggregate and creating an even, fine-grained texture. Fine rendering is a classic finish for interior and exterior walls. Build-up […]

What is patterned glass?

Patterned glass is translucent glass into which a pattern, texture or figure has been impressed during the rolling process. The relief allows light to pass through but disrupts the view — ideal for situations where daylight and privacy are both desired. Patterned glass is also sometimes called ornamental glass. Production process Patterned glass is made […]

What is a pinnacle (fiale)?

A pinnacle (or fiale) is a slender, tower-shaped ornament used in Gothic architecture to crown buttresses, gable tops, pinnacle stones and flying buttresses. The pinnacle usually has a square or polygonal base, a pointed roof and is richly decorated with crockets (knobbed leaf ornaments) and a finial cross at the top. While the ornament initially […]