What is an HEA beam and HEB beam?
HEA and HEB beams are European wide-flange steel sections with a cross-section shaped like an H. They have wide, parallel flanges and are widely used as load-bearing beams and columns. The number in the designation (for example HEA 200) refers roughly to the section height in millimetres. Difference between HEA, HEB and HEM At the […]
What is HDPE film?
HDPE film is a film made of high-density polyethylene. It is a strong, tough and chemically resistant plastic that lets virtually no water through. In construction it is used as a sealing and separating layer. Properties Watertight — lets moisture and water through almost not at all Strong and tear-resistant — more resistant to mechanical […]
What is high relief?
High relief, also called haut-relief, is a relief in which the depicted figures project strongly from the background surface. More than half of the form stands proud of the plane, so parts appear almost detached from the background. The French haut means ‘high’. Relief in degrees Relief is classified by how far the figure projects […]
What is hasco?
Hasco was a pasty, texturable wall-finishing material that dried very hard after application. It was applied in layers and then worked with a brush or roller to create a relief pattern. After drying, the high parts were smoothed and polished for gloss, while the lower parts stayed matt — creating a decorative effect through relief […]
What is the heart side of wood?
The heart side of a board is the side that faced the heart (the core) of the tree. The opposite side is called the sap side or outer side. On the end grain you can tell them apart by the growth rings: the heart side is the side with the smallest ring arcs. Why it […]
What is resin?
Resin is a tough, sticky substance. In its natural form, resin is secreted by conifers (pine, spruce, larch) at points where the bark is damaged; it seals the wound and protects the tree. In construction and industry, ‘resin’ also refers to a large group of natural and synthetic resins used as binders. Resin in wood […]
What is a window armature?
A window armature is the framework of horizontal and vertical bars, mullions and arches in a window — usually of stone or iron, sometimes of wood. It divides the window into panels and gives large glass areas, such as stained-glass windows, the strength they need. Function The armature has two roles: Structural — it carries […]
What is bluestone?
Bluestone is a dense, dark-grey to blue-black limestone that is very hard and wear-resistant. The best-known type is Belgian bluestone (petit granit), quarried in Wallonia. Despite the name it is not granite but a limestone; in cross-section, fossil remains (crinoids) are often visible as light flecks. Properties Hard and wear-resistant — suitable for heavily used […]
What is the Mohs hardness scale?
The Mohs hardness scale is a scale from 1 to 10 that indicates the scratch hardness of minerals. It was drawn up in 1812 by the German mineralogist Friedrich Mohs. The principle is simple: a mineral with a higher number scratches a mineral with a lower number. The ten reference minerals Value Mineral 1 Talc […]
What is hardboard?
Hardboard is a thin, hard board made from strongly compressed wood fibres. The fibres are pressed under high pressure and temperature into a high-density board (typically over 800 kg/m³). It is characterised by a smooth top face and a rough, mesh-patterned back, caused by the press screen. Properties Thin and stiff — common thicknesses range […]
