If you’ve still got an old analogue electricity meter — that thing with the spinning disc that’s been tracking your energy use for decades — it’s time for an upgrade. The UK’s smart meter rollout is in full swing, and energy suppliers are required to offer every household a smart meter by the end of 2025. Millions of homes have already made the switch, but plenty haven’t. If yours is one of them, there’s never been a better time to get it sorted.

The good news: your energy supplier will install a smart meter free of charge. But there’s more changing in your consumer unit than you might think. And this is a perfect opportunity to check whether the rest of your electrical installation is still up to scratch.

Why is the analogue meter being replaced?

The Ferraris meter is a purely mechanical device from the last century. An aluminium disc spins faster the more electricity you use. Simple, reliable — but not fit for the modern energy grid.

The problem:

That’s why the government and energy suppliers are pushing hard: every home should have a smart meter.

Smart meter vs. prepayment meter: what’s the difference?

When your supplier offers a smart meter, you’ll get a SMETS2 meter — the latest standard that works across all suppliers. Here’s what it offers compared to your old analogue meter:

Analogue meter Smart meter (SMETS2)
Measures consumption and export separately No Yes
In-home display with usage info No Yes, included
Submit meter readings manually Yes, you have to do it yourself No, automatic
Sends data to supplier No Yes, remotely
Compatible with time-of-use tariffs No Yes
Compatible with home battery/HEMS No Yes
Privacy Maximum, no data communication Data is shared (you can opt out of half-hourly readings)

My advice: get the smart meter. It’s free, it’s the future, and it unlocks time-of-use tariffs, home energy management, and automatic readings. The only reason to hesitate is privacy, but you can adjust your data sharing preferences with your supplier.

What changes in your consumer unit?

Your energy supplier only replaces the meter itself. But there’s more to consider:

What your energy supplier does:
– Removes the old analogue meter
– Installs a new SMETS2 smart meter
– Checks the connection
– The whole job takes 30 to 45 minutes

What your energy supplier does NOT do:
– Inspect or upgrade your consumer unit
– Replace wiring
– Add extra circuits
– Install surge protection

And that’s exactly where it gets interesting for the DIYer.

Is this the right time for a consumer unit upgrade?

If your supplier is already working on your electrical installation, this is a logical time to take a critical look at the rest of it. Especially if your home is more than 20-25 years old.

Signs your consumer unit needs an upgrade:

What does a consumer unit upgrade cost?

Work DIY Electrician
Analogue meter replaced with smart meter Not permitted (done by supplier) Free (energy supplier)
Consumer unit replacement (12-16 circuits) Not permitted £700 – £1,300
Consumer unit replacement (18-24 circuits) Not permitted £1,000 – £1,800
Additional circuit Not permitted £120 – £250 per circuit
Surge protection Not permitted £120 – £200
Additional RCD Not permitted £80 – £170
Supply upgrade (single-phase to three-phase) Not permitted (done by DNO) £500 – £1,500 (DNO)

As you can see: you’re not allowed to touch the consumer unit yourself. Work on the consumer unit and meter is reserved for registered electricians (Part P of the Building Regulations) and your distribution network operator (DNO). There’s a good reason for that — you’re working with high currents right behind the main supply.

What CAN you do yourself?

The consumer unit is off limits. But there’s plenty of work in and around your home you can do yourself if you’re already looking at your electrics:

Job DIY? Estimated cost (materials)
Replace a socket Yes (power off!) £10 – £25
Add an extra socket to an existing circuit Yes, but get it inspected £15 – £40
Fit cable trunking Yes £15 – £50
Tidy up consumer unit area and bundle cables Yes (carefully) £8 – £15
Install a smart switch or dimmer Yes £15 – £40
Connect outdoor lighting (to existing circuit) Yes £25 – £65

Step-by-step: getting your analogue meter replaced

Step 1: Check which meter you have

Open the cupboard where your meter is and have a look. Can you see a spinning disc or an analogue counter with dials? Then you’ve got a Ferraris meter that needs replacing. Already got a digital display? Then you likely have a smart meter and don’t need to do anything.

Step 2: Contact your energy supplier

Your energy supplier (British Gas, Octopus Energy, OVO, EDF, E.ON, Scottish Power, etc.) should have already offered you a smart meter. If they haven’t been in touch, contact them directly. You can book an installation online or by phone.

Step 3: Book an appointment

Call your supplier or book online. An engineer will come to your home and needs 30 to 45 minutes. You’ll need to be in — the engineer needs access to the meter.

Step 4: Prepare the area

Make sure the meter is freely accessible. No boxes or clutter in front of it. If your meter is behind a cupboard or housing, make sure the engineer can reach it.

Step 5: Check after installation

After installation:
– Check that all circuits still work
– Note the starting reading on the new meter
– Submit the final reading from your old meter to your supplier (though this is usually handled automatically with a smart meter)
– Make sure the in-home display is working and showing your usage

Step 6: Consider additional work

This is the perfect time to have an electrician look at your consumer unit. Get a quote for a consumer unit upgrade if you’ve got old rewirable fuses, too few circuits, or no surge protection. Combine jobs — it saves on call-out charges.

What if you have solar panels?

This is an important point. With an old analogue meter, the disc literally spun backwards when you were exporting. You only paid for the net difference between consumption and generation. That was financially very favourable.

With a smart meter, consumption and export are measured separately. Under the Smart Export Guarantee (SEG), your energy supplier must offer you a tariff for the electricity you export to the grid. However, the export rate is significantly lower than what you pay for electricity you buy.

A worked example: if you export 2,500 kWh per year and the difference between your import tariff and SEG export rate is around 20p/kWh, that’s roughly £500 per year less favourable than the old situation where the meter ran backwards.

What can you do?

Frequently asked questions

Do I have to pay for the meter replacement?

No. Your energy supplier installs the smart meter completely free of charge. The meter remains the property of the supplier.

Can I refuse?

You can, but there’s no real reason to. Smart meters are not compulsory by law in the UK, but suppliers are obligated to offer them. Refusing means you’ll miss out on time-of-use tariffs and accurate billing.

How long does the replacement take?

On average 30 to 45 minutes. The power will be off briefly during the swap.

Do I need to be home?

Yes. The engineer needs access to your meter.

Will my energy contract change?

Your contract doesn’t change automatically, but a smart meter opens up the possibility of time-of-use and agile tariffs. Contact your energy supplier to discuss your options.


Replacing an analogue electricity meter is straightforward and free. Your supplier handles the whole thing and you get a meter that’s fit for the future. Use this as an opportunity to take a proper look at your entire electrical installation. A smart meter in an outdated consumer unit is like a new engine in a rusty car.

Check out our DIY plans at FredsDIYPlans.com for more home improvement projects.

Leave a Reply

Your email address will not be published. Required fields are marked *