What is a block profile?
A block profile is a building component with a simple rectangular or square cross-section. Unlike rounded, tapered, or moulded profiles, a block profile has flat faces and sharp 90-degree edges, giving it a clean, geometric appearance. Characteristics The defining feature of a block profile is its straight-sided, box-like cross-section. This shape is produced by extruding […]
What is a block keel?
A block keel is a short, solid piece of timber used as a structural joint element in wood-frame construction. It is inserted between framing members — such as joists, studs, or beams — to transfer loads, prevent lateral movement, and add rigidity to the assembly. Function and characteristics In timber framing, block keels serve as […]
What is a wood block floor?
A wood block floor is a type of solid timber flooring composed of small, individual wooden blocks — typically 200-300 mm long, 50-75 mm wide, and 20-30 mm thick — laid side by side in geometric patterns. It is one of the oldest and most durable forms of decorative flooring. Typical wood block dimensions200-300 mmLength […]
What is a box gutter?
A box gutter is a rectangular, trough-shaped drainage channel built into the roof structure rather than hung from the eaves. It collects rainwater from one or more roof slopes and directs it towards downpipes. Its enclosed, box-like cross-section distinguishes it from open half-round or ogee gutters. Design and construction Box gutters are typically formed from […]
What is a block plank?
A block plank is a thick sawn timber board, typically 50 mm or more in thickness, used where substantial strength and load-bearing capacity are required. It is heavier and more rigid than standard planking and is often employed in temporary works, heavy-duty flooring, and structural timber construction. Characteristics Block planks are distinguished from ordinary boards […]
What is block plastering?
Block plastering is a decorative rendering technique in which a plaster coat is scored, incised, or moulded to imitate the pattern of dressed stone blocks or ashlar masonry. The finished surface gives the impression that a wall is built from individual stone units, even though the underlying structure may be brick, concrete block, or poured […]
What is a flower window?
A flower window is a low window frame, typically set at or near floor level, specifically designed to accommodate flower boxes, planters, or potted plants. It creates a visual connection between interior greenery and the street-facing facade of a building. Design characteristics Flower windows are usually wider than they are tall and positioned lower on […]
What is bleeding in concrete?
Bleeding is the process by which mix water in freshly placed concrete rises to the surface as heavier solid particles — cement, sand, and aggregate — settle downward under gravity. A thin film of water, called bleed water, appears on top of the slab shortly after placement. Why bleeding occurs Concrete is a suspension of […]
What is blob architecture?
Blob architecture is a movement in contemporary architecture defined by organic, amorphous, and free-form building shapes. Structures in this style feature flowing curves, bulging surfaces, and a deliberate absence of straight lines, giving them an almost biological appearance. Origins and philosophy The term “blob architecture” was coined by architect Greg Lynn in the mid-1990s. Lynn […]
What is a blind rivet tool?
A blind rivet tool, also known as a pop rivet gun or blind rivet pliers, is a hand-operated tool designed to set blind rivets — permanent mechanical fasteners used to join two or more layers of material when only one side of the workpiece is accessible. How it works The tool grips the mandrel (the […]
