What is a Campanile?
# What is a Campanile? **A campanile is a freestanding bell tower that is not structurally connected to its associated church building.** The term comes from the Italian word *campana*, meaning ‘bell’. Campaniles are characteristic of Italian architecture but are found worldwide. ## Features A campanile differs from an ordinary church tower in that it: […]
How to Build a Playhouse: Build a Wooden Playhouse for Children (2026)

Building a playhouse yourself costs between €150 and €400 in materials. Ready-made wooden playhouses of comparable quality cost €400 to €1,500. Building your own saves significantly — and you can tailor it to exactly what your children want: with or without a veranda, slide, climbing wall or swing. In this article you’ll find a complete […]
How to Replace a Window: Complete Guide with Costs, Materials and Step-by-Step Instructions (2026)

Replacing windows is one of the most cost-effective investments you can make in your home. Replacing single glazing with high-performance double glazing delivers an average saving of €150–300 per year in energy costs per property. The cost of replacing a standard window runs to €350–900 per window including installation — depending on the glazing and […]
How to Build a Planter Box: Build Your Own Wooden Planter (2026)

Building a wooden planter box yourself costs between €20 and €80 in materials. Ready-made planters of comparable quality are sold for €50 to €200. Building your own saves you roughly half the cost — and you get to choose the exact dimensions to suit your patio, balcony or garden wall. A planter box is one […]
What is a Segmental Tube Pile?
# What is a Segmental Tube Pile? **A segmental tube pile (Dutch: buissegmentpaal) is a type of displacement pile constructed from prefabricated hollow concrete tube segments that are stacked on top of each other and hydraulically pressed or driven into the ground. This modular system allows piles to be installed in low-headroom conditions and adjusted […]
What is a Steel Tube Pile?
# What is a Steel Tube Pile? **A steel tube pile (Dutch: buispaal) is a hollow cylindrical steel section that is driven, vibrated, or drilled into the ground to transfer structural loads to deeper, load-bearing soil or rock layers. Steel tube piles are widely used in heavy civil engineering, marine construction, and building foundations where […]
What is the Karsten Tube Test?
# What is the Karsten Tube Test? **The Karsten tube test (also called the pipe method or RILEM tube test) is a non-destructive field method used to measure the water absorption rate of facade materials. A small graduated glass tube is attached to the building surface with putty, filled with water, and the rate at […]
What is Bulging?
# What is Bulging? **Bulging is the visible outward deformation or displacement of a wall surface from its original plane. In construction, bulging typically indicates an underlying structural problem — such as excessive lateral pressure, moisture expansion, corrosion of embedded elements, or loss of bond between wall layers — that requires investigation and repair.** ## […]
What is Flexural Strength?
# What is Flexural Strength? **Flexural strength (also called bending strength or modulus of rupture) is the maximum stress a material can sustain at its outermost fibre when subjected to bending before it fractures or yields. It is a critical mechanical property used in construction to determine whether beams, slabs, and other structural elements can […]
What is a Bar Bending Schedule?
# What is a Bar Bending Schedule? **A bar bending schedule (BBS) is a detailed document that lists every reinforcement bar required for a concrete structure, specifying each bar’s reference mark, type, diameter, shape, bending dimensions, cut length, and quantity. It serves as the primary instruction sheet for cutting, bending, and placing reinforcement steel on […]
