What is a daliegat?

A daliegat is a round or oval depression in a peat or lowland-bog area, usually a few metres across, formed by subsidence or by leaching of peat material. The phenomenon has both geological and cultural-historical origins and is related to the daliebult (the mound form). How does a daliegat form? There are two main explanations […]

What is a daliebult?

A daliebult is a small round or oval mound in a peat or lowland-bog area, formed when soft peat material was pushed up through the frozen top layer. It is a geomorphological phenomenon dating from the last ice age and the period after it, and is related to the daliegat (its opposite: a depression or […]

What are roof shapes?

Roof shapes are the various geometric forms in which a building’s roof can be built. The choice of roof shape influences appearance, structure, drainage, usable loft area and cost. In British and European construction dozens of variants exist, often combinations of a few main shapes. Group 1: flat roofs Flat roof — nearly horizontal surface […]

What is a roof shape?

A roof shape is the geometric form of the roof of a building, determined by the number and direction of the roof slopes, the pitch angle and any breaks or transitions. The roof shape strongly influences the appearance of the building, the usable loft area, water drainage and the structural build-up. Main roof shapes In […]

What is an eaves?

The eaves are the lower edge of a pitched roof slope, where the roof meets the gutter assembly, the roof overhang or directly the façade. It is a crucial detail in the roof build-up, because all rainwater collects here for discharge, and air inlet for the ventilation of the roof structure also occurs here. Components […]

What is a traditional roof window?

A traditional roof window is the historic, often craftsman-built form of a window in the sloping plane of a pitched roof. In modern construction the prefabricated roof window (such as Velux) dominates; the traditional roof window is mainly found in listed buildings, historic loft conversions and older specifications. The window follows the slope of the […]

What is a roof edge trim?

A roof edge trim is a capping profile that is fitted to the top of a roof upstand or roof edge to shed water, terminate the roof membrane and finish the edge neatly. It is mainly used on flat roofs and parapet details, and is typically made of aluminium, galvanised steel or plastic. Functions of […]

What is a roof opening?

A roof opening is a deliberately framed gap in the roof structure for the passage of a chimney, a service penetration, a roof light or a roof window. The opening is planned at the design stage of the roof structure, so rafters, purlins and (where present) roof sheathing are interrupted and supported with a trimmer […]

What is a rafter?

A rafter is a sloping structural timber in a pitched roof that runs from the wall plate at the eaves to the ridge board or a purlin at the top. Rafters, together with purlins, the ridge and any trusses, form the main load-bearing structure of a rafter or purlin roof, transferring the weight of the […]

What is a roof slope?

A roof slope (also called a roof pitch surface or roof plane) is a single continuous inclined surface of a pitched roof, bounded by ridges, hips, valleys, eaves and/or gable verges. A roof may consist of one or more roof slopes, depending on the chosen roof shape. Number and position of roof slopes per roof […]