What is a structural floor?

A structural floor is the load-bearing floor in a building that takes all loads — self-weight, people, furniture, partition walls — and transfers them via joists, beams or load-bearing walls down to the foundations. On top of a structural floor there is usually a screed, insulation layer and floor finish. Functions of a structural floor […]

What is the bearing capacity of a pile?

The bearing capacity of a driven pile is the maximum vertical load the pile can safely support, made up of the point resistance on the load-bearing soil layer plus the shaft friction along the sides of the pile. Calculating this capacity is essential to determine how many piles are needed under a building. Two components […]

What is a corbel?

A corbel is a projecting block of stone, timber or brick that springs out from a wall to support a beam, statue, cornice or overhanging structure, transferring the load down through the wall. The corbel is one of the oldest structural and decorative solutions in architecture for transferring loads to a wall. Function of a […]

What is load-bearing capacity?

Load-bearing capacity is the ability of a building part, material or the ground beneath a foundation to carry a given load without failure or excessive deformation. It is a central quantity in construction: from the soil under a foundation to a concrete slab or a timber beam — everything must have sufficient capacity for the […]

What is grain deviation in wood?

Grain deviation, also called slope of grain, is the angle by which the wood fibres deviate from the long axis of a board, beam or batten. In ideal timber, the fibres run exactly parallel to the length; with grain deviation, they run at an angle or in a spiral. How does grain deviation arise? Grain […]

What is a casement fastener?

A casement fastener is a simple turn-operated catch for casement windows, shutters or hopper sashes, in which a rotating wire, hook or pin engages a keep on the frame to hold the window closed. It is one of the older types of window hardware and is still often found in historic buildings and listed monuments. […]

What is wire mesh formwork?

Wire mesh formwork is a lightweight, often permanent formwork made of steel mesh or expanded metal, used to hold back fresh concrete or to close off a construction joint. The mesh remains in the concrete after pouring and creates a rough surface for bonding with the next pour. How does it work? In large concrete […]

What is wired glass?

Wired glass is glass into which a fine metallic wire mesh has been cast during manufacture. When broken, the mesh holds the fragments in place, which is why wired glass was once widely used as fire- and burglar-resistant glazing in stores, basements, rooflights and industrial buildings. How does wired glass work? During production, a metal […]

What is DPC membrane?

DPC membrane (Damp Proof Course) is a waterproof film or strip that is built horizontally into a wall or foundation to stop rising damp from the ground. It is a key element of the moisture protection of both new and renovated masonry walls. How does DPC membrane work? Moisture from the ground can rise by […]

What is a DPA pile?

A DPA pile (Drilled Pile Atlas) is a screwed-in displacement concrete pile in which a special screw point pushes the soil sideways without removing it. The pile is formed in place: once the design depth is reached, the screw is withdrawn step by step while concrete is pumped into the void it leaves behind. This […]