What is plasterboard?

Plasterboard is a building board with a core of gypsum. In the gypsum plasterboard the core is faced on both sides with strong paper; in the gypsum fibreboard the gypsum is reinforced throughout the mass by added fibres. Plasterboard is used to finish walls, ceilings and roof slopes quickly and flat. Application Plasterboard is screwed […]

What is gypsum?

Gypsum is a mineral building material based on calcium sulphate. From natural gypsum rock or from industrial by-products, calcined gypsum (hemihydrate) is produced by heating. Mix this powder with water and it sets quickly into a hard, stone-like mass. Gypsum is thus one of the most important materials in interior finishing. Application Gypsum is used […]

What is a seamless floor?

A seamless floor (also called a poured or resin floor) is a jointless floor finish applied to the substrate in a liquid state that levels itself. Once cured, a closed, smooth surface without joints or seams is created. Seamless floors are made from synthetic resin (such as epoxy or polyurethane) or from cement. Application Seamless […]

What is casting mortar?

Casting mortar (grouting mortar) is a thin-flowing, usually low-shrinkage mortar used to completely fill voids, joints and connections. Because the mortar flows well, it fills every space and produces a dense, load-bearing connection without air pockets. Application Casting mortar is used, among other things, to bed steel structural components such as the base plates of […]

What is a poured screed?

A poured screed (also called a flowing or self-levelling screed) is a screed applied to the structural floor in a liquid state that levels itself almost flat. This self-levelling property makes it possible to produce large, true surfaces quickly, suitable as a base for the floor finish. Application Poured screeds are used above all over […]

What is cast-in-situ construction?

Cast-in-situ construction is a building method in which load-bearing walls and floors are cast from concrete on site (in place) into formwork. Once the concrete has hardened, the formwork is removed and the structure stands as one coherent, monolithic whole. Application Cast-in-situ construction is widely used in housing, apartments and commercial building, especially on projects […]

What is mastic asphalt?

Mastic asphalt is a dense mixture of bitumen, filler and aggregate that is laid in a heated, fluid state and levels itself. Unlike ordinary asphalt, mastic asphalt contains so much binder that it does not need to be compacted with a roller; it effectively flows into place. Application Mastic asphalt is used as a hard-wearing, […]

What is a Gibbs surround?

A Gibbs surround is a classical frame around a door or window in which the moulding is interrupted at regular intervals by bold, projecting blocks. The motif is named after the British architect James Gibbs, who used it extensively in the eighteenth century. Application The Gibbs surround is used to give emphasis to an entrance […]

What is a GEWI bar?

GEWI is a brand name for solid steel bars with a coarse thread running along their entire length. Thanks to this thread, the bars can be coupled, anchored or cut to length at any point, which makes GEWI steel suitable for ground anchors, micropiles, grout anchors and heavy reinforcement applications. Application GEWI bars are widely […]

What is a vault bay?

A vault bay (also called a severy or vault cell) is the individual, curved surface of a vault bounded by the supporting ribs, transverse arches or walls. A large vault consists of several vault bays that together form the covering of a space. Application Vault bays occur above all in churches, monasteries and other monumental […]