What is a semi-paved (self-binding) surface?
A semi-paved surface is a type of surfacing that sits between unpaved and fully paved, such as asphalt or block paving: a water-permeable, half-open top layer. Rainwater can largely infiltrate through it. Characteristics There are two main forms. Unbound semi-paving consists of loose material that stays loose, such as gravel, grit, shells or granular aggregates. […]
What is a half truss?
A half truss is a truss that covers only half of a full, symmetrical truss: it runs from the ridge or an existing wall down to one side and bears there. It is used where no full, symmetrical roof is needed. Characteristics Where a normal truss forms two roof planes that meet at the ridge, […]
What is semi-detached housing?
Semi-detached housing is building where a home is attached to another home on one side and stands free on the other, with space up to the plot boundary. It sits between detached (fully free-standing) and terraced (continuous row) housing. Characteristics In semi-detached housing the home shares one party wall with the neighbour, while the other […]
What is a barbed spike (hakkelbout)?
A barbed spike (Dutch “hakkelbout”) is a kind of heavy nail, square in cross-section, provided on one or more sides with forged barbs of wrought iron. In Dutch these barbs are called “hakkels”. Characteristics The barbed spike differs from an ordinary nail in its shape and its barbs: Square cross-section Forged from wrought iron Barbs […]
What is a hagioscope (squint)?
A hagioscope (also called a “squint”) is an angled viewing opening or narrow slit in a wall of a church, usually in the chancel or transept wall. Through it, worshippers who were not standing in the nave could still keep sight of the altar. Characteristics The hagioscope is an opening bored at an angle through […]
What is HACCP wall, ceiling and floor?
HACCP stands for Hazard Analysis and Critical Control Points, a food-safety system; walls, ceilings and floors in spaces where food is prepared or processed must be hygienically viable. Think of kitchens, butcheries, bakeries, fish processing, hospitals, cleanrooms and cold stores. Characteristics To meet the hygiene requirements, these surfaces must be: Smooth and seamless or easy […]
What is a habitat?
A habitat is the natural living environment of an animal or plant species, where that species finds food, shelter and opportunities to reproduce. In construction, the concept plays a role in nature-inclusive and climate-adaptive building. Characteristics A habitat provides a species with everything it needs to survive and reproduce. In the built environment, it is […]
What is a feasibility study?
A feasibility study is an investigation that, before the final go/no-go decision on a building project, examines whether the plan is technically, financially, legally and spatially viable. It results in a substantiated recommendation to proceed, adjust or stop. Characteristics The study belongs in the initiation or definition phase, before the final design. Among other things, […]
What is interlock resistance?
Interlock resistance is the resistance to shearing that arises from friction and interlocking between the grains in a granular material. Examples include crushed sand or aggregate. Characteristics Interlock resistance develops where grains touch and press against one another. Angular, rough grains interlock better than round, smooth grains and therefore give a higher interlock resistance. High […]
What does ‘square’ (at right angles) mean?
Square means at a right angle, that is exactly 90 degrees. A joint, corner, or wall is square when the two parts stand perpendicular to each other. Characteristics Squareness is about the angle between two lines, surfaces, or parts: if they meet at exactly 90 degrees, the join is square. You can check it with […]
